[Sat Jul 14 13:53:46 2012] Detection parameters:
  Position = (284.4, 258.3) = 11 53 14.71 -39 9 5.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.8 +/- 17.2
  Background counts = 55.0
  Rate = 0.004 +/- 0.0005

[Sat Jul 14 13:53:46 2012] Off-axis axis estimate = 3.08'
[Sat Jul 14 14:52:38 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 14:52:38 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Sat Jul 14 14:52:38 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.149
[Sat Jul 14 14:52:38 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.97"
[Sat Jul 14 15:26:29 2012] fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_src10.ximg exists
[Sat Jul 14 15:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_src10.csv
[Sat Jul 14 15:26:29 2012] fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Jul 14 15:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_src10.csv
[Sat Jul 14 15:26:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 15:26:30 2012] fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Jul 14 15:26:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Jul 14 15:26:30 2012] fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Jul 14 15:26:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Jul 14 15:26:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 15:26:42 2012] Spatial fit model total counts = 337.294000, observed total counts = 283.000000
[Sat Jul 14 15:26:42 2012] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 14 15:26:42 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 15:26:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 15:26:42 2012] Assessing source extent using major
[Sat Jul 14 15:26:42 2012] Source does appear to be extended
[Sat Jul 14 15:26:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 16:12:27 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 16:12:27 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Sat Jul 14 16:12:27 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.149
[Sat Jul 14 16:12:27 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 7.97"
[Sat Jul 14 16:46:44 2012] fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_src10.ximg exists
[Sat Jul 14 16:46:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_src10.csv
[Sat Jul 14 16:46:44 2012] fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Jul 14 16:46:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_src10.csv
[Sat Jul 14 16:46:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 16:46:44 2012] fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Jul 14 16:46:44 2012] fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Jul 14 16:46:44 2012] Fit fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Jul 14 16:46:58 2012] Spatial fit model total counts = 261.173000, observed total counts = 283.000000
[Sat Jul 14 16:46:58 2012] Offset between fit and detection position for source 18 = 0.432841 pixels
[Sat Jul 14 16:46:58 2012] 288.302000 total counts/ 141.930000 bgd. counts: snr = 12.286294
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.432841 pixels
  Position = (284.0, 258.5) = 11 53 14.86 -39 9 4.3
  Extent = 9.2 (9.2-9.2)", rotation angle = 0
  Source counts = 146.4 +/- 17.0
  Background counts = 141.9
  Rate = 0.005 +/- 0.0006
[Sat Jul 14 16:46:58 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 16:46:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 16:46:58 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 16:46:58 2012] Source does appear to be extended
[Sat Jul 14 16:46:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 17:41:36 2012] XMMSAS src. selection expression = ellipse(24660.514910, 22436.939600, 553.095258, 553.095258, 0.000000, X, Y)
[Sat Jul 14 17:41:36 2012] Writing source region out to fullrun_mos2_xmm0550460301_pi300-10000_pass1_cl_src18_src.reg
[Sat Jul 14 17:41:36 2012] Extracting stamp from image fullrun_mos2_xmm0550460301_pi300-10000_cl_sm2.00.img.gz, (252, 227) - (316, 290)
[Sat Jul 14 17:41:36 2012] XMMSAS bgd. selection expression = annulus(24660.514910, 22436.939600, 921.825430, 1843.650859, X, Y) && !ellipse(25386.097800, 23942.183600, 481.984014, 481.984014, 0.000000, X, Y)
[Sat Jul 14 17:41:36 2012] Writing fullrun_mos2_xmm0550460301_pi300-10000_pass1_cl_src18.gif
[Sat Jul 14 17:44:05 2012] Mean detx,y = (-1085.83, 1247.79) 
[Sat Jul 14 17:44:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 17:44:15 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 17:44:15 2012] Setting source spectrum file to fullrun_mos2_xmm0550460301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Jul 14 17:44:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550460301_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sat Jul 14 18:12:09 2012] Updating aperture counts using extracted products
[Sat Jul 14 18:12:09 2012] Error reading totcts from fullrun_mos2_xmm0550460301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Jul 14 18:12:10 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 18:12:10 2012] Using photon index=1.80, rate=0.00479, arf fullrun_mos2_xmm0550460301_pi300-10000_pass1_cl_src18.arf
[Sat Jul 14 18:12:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 18:12:10 2012] Updating source flux to 4.8e-14
[Sat Jul 14 18:12:29 2012] Flag p found in src. 18 procflags, skipping spectral fitting