[Sat Jul 14 13:53:45 2012] Detection parameters:
  Position = (161.8, 415.7) = 11 54 0.42 -38 57 38.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.3 +/- 16.0
  Background counts = 35.2
  Rate = 0.003 +/- 0.0005

[Sat Jul 14 13:53:46 2012] Off-axis axis estimate = 13.05'
[Sat Jul 14 14:52:38 2012] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 14:52:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 14 14:52:38 2012] Initial guess for spatial extent in simple fitting = 12.95"
[Sat Jul 14 14:52:38 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.013
[Sat Jul 14 14:52:38 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 12.95"
[Sat Jul 14 15:26:29 2012] fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_src12.ximg exists
[Sat Jul 14 15:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_src12.csv
[Sat Jul 14 15:26:29 2012] fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_src12_1.ximg exists
[Sat Jul 14 15:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_src12.csv
[Sat Jul 14 15:26:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 15:26:30 2012] fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sat Jul 14 15:26:30 2012] fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Jul 14 15:26:30 2012] Fit fullrun_mos2_xmm0550460301_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sat Jul 14 15:26:42 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.796653 pixels away
[Sat Jul 14 15:26:42 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 15:26:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 15:26:42 2012] Assessing source extent using major
[Sat Jul 14 15:26:42 2012] Source does appear to be extended
[Sat Jul 14 15:26:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 16:12:27 2012] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 16:12:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 14 16:12:27 2012] Initial guess for spatial extent in simple fitting = 12.95"
[Sat Jul 14 16:12:27 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.013
[Sat Jul 14 16:12:27 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 12.95"
[Sat Jul 14 16:46:44 2012] fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_src12.ximg exists
[Sat Jul 14 16:46:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_src12.csv
[Sat Jul 14 16:46:44 2012] fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_src12_1.ximg exists
[Sat Jul 14 16:46:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_src12.csv
[Sat Jul 14 16:46:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 16:46:44 2012] fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sat Jul 14 16:46:44 2012] fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Jul 14 16:46:44 2012] Fit fullrun_mos2_xmm0550460301_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sat Jul 14 16:46:58 2012] Spatial fit model total counts = 257.483000, observed total counts = 245.000000
[Sat Jul 14 16:46:58 2012] Offset between fit and detection position for source 1 = 0.183707 pixels
[Sat Jul 14 16:46:58 2012] 258.079200 total counts/ 191.677000 bgd. counts: snr = 4.796202
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.183707 pixels
  Position = (162.0, 415.6) = 11 54 0.37 -38 57 40.1
  Extent = 5.2 (3.5-7.4)", rotation angle = 0
  Source counts = 66.4 +/- 16.1
  Background counts = 191.7
  Rate = 0.002 +/- 0.0005
[Sat Jul 14 16:46:58 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 16:46:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 16:46:58 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 16:46:58 2012] Source does appear to be extended
[Sat Jul 14 16:46:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 17:41:36 2012] XMMSAS src. selection expression = ellipse(14042.764800, 36107.639800, 313.159847, 313.159847, 0.000000, X, Y)
[Sat Jul 14 17:41:36 2012] Writing source region out to fullrun_mos2_xmm0550460301_pi300-10000_pass1_cl_src1_src.reg
[Sat Jul 14 17:41:36 2012] Extracting stamp from image fullrun_mos2_xmm0550460301_pi300-10000_cl_sm2.00.img.gz, (144, 398) - (180, 434)
[Sat Jul 14 17:41:36 2012] XMMSAS bgd. selection expression = annulus(14042.764800, 36107.639800, 521.933078, 1043.866155, X, Y)
[Sat Jul 14 17:41:36 2012] Writing fullrun_mos2_xmm0550460301_pi300-10000_pass1_cl_src1.gif
[Sat Jul 14 17:44:30 2012] Mean detx,y = (-6802.95, -15066.50) 
[Sat Jul 14 17:44:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 17:44:42 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 17:44:42 2012] Setting source spectrum file to fullrun_mos2_xmm0550460301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 14 17:44:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550460301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jul 14 18:01:43 2012] Not generating rmf since there are only 66 counts
[Sat Jul 14 18:01:43 2012] rmf not generated due to insufficient counts
[Sat Jul 14 18:12:09 2012] Updating aperture counts using extracted products
[Sat Jul 14 18:12:09 2012] Error reading totcts from fullrun_mos2_xmm0550460301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 14 18:12:10 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 18:12:10 2012] Using photon index=1.80, rate=0.00217, arf fullrun_mos2_xmm0550460301_pi300-10000_pass1_cl_src1.arf
[Sat Jul 14 18:12:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 18:12:10 2012] Updating source flux to 7.9e-14
[Sat Jul 14 18:12:29 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting