[Mon May 13 10:54:35 2013] Detection parameters:
  Position = (306.0, 372.6) = 7 43 31.13 -51 37 13.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.3 +/- 8.1
  Background counts = 4.6
  Rate = 0.005 +/- 0.001

[Mon May 13 10:54:36 2013] Off-axis axis estimate = 5.41'
[Mon May 13 11:08:31 2013] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting
[Mon May 13 11:08:31 2013] Initial guess for spatial extent in simple fitting = 9.13"
[Mon May 13 11:08:31 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.110
[Mon May 13 11:08:31 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 9.13"
[Mon May 13 11:17:30 2013] fullrun_mos2_xmm0550453201_pi300-10000_cl_pass0_src4.ximg exists
[Mon May 13 11:17:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550453201_pi300-10000_cl_pass0_src4.csv
[Mon May 13 11:17:30 2013] fullrun_mos2_xmm0550453201_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon May 13 11:17:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550453201_pi300-10000_cl_pass0_src4.csv
[Mon May 13 11:17:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550453201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550453201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 11:17:30 2013] fullrun_mos2_xmm0550453201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon May 13 11:17:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550453201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon May 13 11:17:30 2013] fullrun_mos2_xmm0550453201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon May 13 11:17:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550453201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon May 13 11:17:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550453201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550453201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 11:17:34 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 11.585080 pixels away
[Mon May 13 11:17:34 2013] Vigneting correction estimate = 1.000000
[Mon May 13 11:17:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 11:17:34 2013] Assessing source extent using major
[Mon May 13 11:17:34 2013] Source does appear to be extended
[Mon May 13 11:17:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 11:27:36 2013] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting
[Mon May 13 11:27:36 2013] Initial guess for spatial extent in simple fitting = 9.13"
[Mon May 13 11:27:36 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.110
[Mon May 13 11:27:36 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 9.13"
[Mon May 13 11:37:21 2013] fullrun_mos2_xmm0550453201_pi300-10000_cl_pass1_src4.ximg exists
[Mon May 13 11:37:21 2013] fullrun_mos2_xmm0550453201_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon May 13 11:37:21 2013] Fit fullrun_mos2_xmm0550453201_pi300-10000_cl_pass1_src4 appears to have run properly
[Mon May 13 11:37:22 2013] fullrun_mos2_xmm0550453201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon May 13 11:37:22 2013] fullrun_mos2_xmm0550453201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon May 13 11:37:22 2013] Fit fullrun_mos2_xmm0550453201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Mon May 13 11:37:25 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 109.742034 pixels away
[Mon May 13 11:37:25 2013] Spatial fit model total counts = 85.648100, observed total counts = 80.000000
[Mon May 13 11:37:25 2013] Offset between fit and detection position for source 5 = 0.214722 pixels
[Mon May 13 11:37:25 2013] 84.096900 total counts/ 61.229500 bgd. counts: snr = 2.922378
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.214722 pixels
  Position = (305.8, 372.7) = 7 43 31.22 -51 37 13.4
  Extent = 5.2 (3.4-7.8)" x 2.3 (2.3-3.7)", rotation angle = 339 (318-3) degrees
  Source counts = 22.9 +/- 9.2
  Background counts = 61.2
  Rate = 0.002 +/- 0.001
[Mon May 13 11:37:25 2013] Vigneting correction estimate = 1.000000
[Mon May 13 11:37:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 11:37:25 2013] Assessing source extent using major axis lower bound
[Mon May 13 11:37:25 2013] Source does appear to be extended
[Mon May 13 11:37:25 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.94
[Mon May 13 11:40:42 2013] XMMSAS src. selection expression = ellipse(26552.350000, 32377.109000, 314.412609, 140.829004, 339.341285, X, Y)
[Mon May 13 11:40:42 2013] Writing source region out to fullrun_mos2_xmm0550453201_pi300-10000_pass1_cl_src5_src.reg
[Mon May 13 11:40:42 2013] Extracting stamp from image fullrun_mos2_xmm0550453201_pi300-10000_cl_sm2.00.img.gz, (288, 355) - (324, 391)
[Mon May 13 11:40:42 2013] XMMSAS bgd. selection expression = annulus(26552.350000, 32377.109000, 524.021015, 1048.042030, X, Y)
[Mon May 13 11:40:42 2013] Writing fullrun_mos2_xmm0550453201_pi300-10000_pass1_cl_src5.gif
[Mon May 13 11:41:27 2013] Mean detx,y = (-1313.20, 4360.08) 
[Mon May 13 11:41:28 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 11:41:35 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 11:41:35 2013] Setting source spectrum file to fullrun_mos2_xmm0550453201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon May 13 11:41:35 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550453201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon May 13 11:42:44 2013] Not generating rmf since there are only 22 counts
[Mon May 13 11:42:44 2013] rmf not generated due to insufficient counts
[Mon May 13 11:43:18 2013] Updating aperture counts using extracted products
[Mon May 13 11:43:18 2013] Total counts from fullrun_mos2_xmm0550453201_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 25.00
[Mon May 13 11:43:18 2013] Total counts from fullrun_mos2_xmm0550453201_pi300-10000_pass1_cl_src5_bgd.pi.gz = 76.00
[Mon May 13 11:43:18 2013] Got source and background scale factors 139200.000000, 2315192.000000
[Mon May 13 11:43:18 2013] User source parameters:
  Position = (305.8, 372.7) = 7 43 31.22 -51 37 13.4
  Extent = 5.2 (3.4-7.8)" x 2.3 (2.3-3.7)", rotation angle = 339 (318-3) degrees
  Source aperture counts = 20.4 +/- 6.1
  Background aperture counts = 4.6
  Rate = 0.002 +/- 0.0006

[Mon May 13 11:43:19 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 11:43:19 2013] Using photon index=1.80, rate=0.00238, arf fullrun_mos2_xmm0550453201_pi300-10000_pass1_cl_src5.arf
[Mon May 13 11:43:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 11:43:19 2013] Updating source flux to 6.1e-14
[Mon May 13 11:43:20 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 11:43:21 2013] xmm0550453201/analysis//spectral/fullrun_mos2_xmm0550453201_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete