[Tue Aug 28 10:16:54 2012] Detection parameters:
  Position = (299.6, 274.1) = 9 16 9.36 -62 19 30.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24382.2 +/- 184.5
  Background counts = 26.1
  Rate = 2 +/- 0.01

[Tue Aug 28 10:16:55 2012] Off-axis axis estimate = 1.77'
[Tue Aug 28 10:19:28 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 10:19:28 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Tue Aug 28 10:19:28 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.051
[Tue Aug 28 10:19:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Tue Aug 28 12:00:16 2012] fullrun_pn_xmm0550452601_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 28 12:00:16 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0550452601_pi300-10000_cl_pass0_src1.csv
[Tue Aug 28 12:00:16 2012] fullrun_pn_xmm0550452601_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 28 12:00:16 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0550452601_pi300-10000_cl_pass0_src1.csv
[Tue Aug 28 12:00:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550452601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550452601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 12:00:17 2012] fullrun_pn_xmm0550452601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 28 12:00:17 2012] fullrun_pn_xmm0550452601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 28 12:00:17 2012] Fit fullrun_pn_xmm0550452601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug 28 13:06:58 2012] Spatial fit model total counts = 21977.700000, observed total counts = 21855.000000
[Tue Aug 28 13:06:58 2012] Offset between fit and detection position for source 1 = 0.126784 pixels
[Tue Aug 28 13:06:58 2012] 22038.470000 total counts/ 4423.870000 bgd. counts: snr = 264.832699
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.126784 pixels
  Position = (299.5, 274.2) = 9 16 9.42 -62 19 30.1
  Extent = 5.9 (5.8-6.0)", rotation angle = 0
  Source counts = 17614.6 +/- 148.5
  Background counts = 4423.9
  Rate = 1 +/- 0.009
[Tue Aug 28 13:06:58 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 13:06:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 13:06:58 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 13:06:58 2012] Source does appear to be extended
[Tue Aug 28 13:06:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 13:07:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 28 13:07:23 2012] Initial guess for spatial extent in simple fitting = 5.91"
[Tue Aug 28 13:07:23 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.869
[Tue Aug 28 13:07:23 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.91"
[Tue Aug 28 14:20:00 2012] fullrun_pn_xmm0550452601_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 28 14:20:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550452601_pi300-10000_cl_pass1_src1.csv
[Tue Aug 28 14:20:00 2012] fullrun_pn_xmm0550452601_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 28 14:20:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550452601_pi300-10000_cl_pass1_src1.csv
[Tue Aug 28 14:20:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550452601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550452601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 14:20:01 2012] fullrun_pn_xmm0550452601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 28 14:20:01 2012] fullrun_pn_xmm0550452601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 28 14:20:01 2012] Fit fullrun_pn_xmm0550452601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug 28 14:59:18 2012] Spatial fit model total counts = 21983.700000, observed total counts = 21855.000000
[Tue Aug 28 14:59:18 2012] Offset between fit and detection position for source 1 = 0.000021 pixels
[Tue Aug 28 14:59:18 2012] 22044.680000 total counts/ 4430.380000 bgd. counts: snr = 264.633548
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000021 pixels
  Position = (299.5, 274.2) = 9 16 9.42 -62 19 30.1
  Extent = 5.9 (5.8-6.0)", rotation angle = 0
  Source counts = 17614.3 +/- 148.5
  Background counts = 4430.4
  Rate = 1 +/- 0.009
[Tue Aug 28 14:59:19 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 14:59:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 14:59:19 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 14:59:19 2012] Source does appear to be extended
[Tue Aug 28 14:59:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 14:59:30 2012] Counts = 17614.300000, rescaling region sizes by 3.000000
[Tue Aug 28 14:59:30 2012] XMMSAS src. selection expression = ellipse(26005.444600, 23805.173000, 1062.577831, 1062.577831, 0.000000, X, Y)
[Tue Aug 28 14:59:30 2012] Writing source region out to fullrun_pn_xmm0550452601_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug 28 14:59:30 2012] Extracting stamp from image fullrun_pn_xmm0550452601_pi300-10000_cl_sm2.00.img.gz, (238, 213) - (361, 335)
[Tue Aug 28 14:59:30 2012] XMMSAS bgd. selection expression = annulus(26005.444600, 23805.173000, 5312.889153, 10625.778306, X, Y) && !ellipse(34348.870117, 33201.942596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25655.201400, 25330.098200, 402.288012, 402.288012, 0.000000, X, Y) && !ellipse(23232.719116, 24046.759064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36206.875549, 22373.360474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19894.864000, 31283.278000, 1523.760044, 1523.760044, 0.000000, X, Y) && !ellipse(20269.318000, 30780.116000, 1462.744042, 1462.744042, 0.000000, X, Y) && !ellipse(20708.692947, 30237.639557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21411.987640, 29435.271118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22574.153000, 27947.488000, 756.445275, 756.445275, 0.000000, X, Y) && !ellipse(23679.070000, 26600.398000, 1150.144033, 412.076812, 50.959000, X, Y) && !ellipse(24059.384000, 26097.862000, 1124.776032, 1124.776032, 0.000000, X, Y) && !ellipse(33598.516357, 25907.042511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24467.734000, 25646.946000, 1328.792038, 1328.792038, 0.000000, X, Y) && !ellipse(29877.994598, 25467.313904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22874.372467, 24443.043427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32514.096191, 21726.353729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25330.755127, 21665.306641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28466.231600, 19428.100800, 358.782410, 358.782410, 0.000000, X, Y) && !ellipse(27362.045240, 19115.762000, 464.960813, 464.960813, 0.000000, X, Y) && !ellipse(14976.732941, 17884.462616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32242.075165, 17115.838272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28038.471880, 14805.125000, 375.659211, 375.659211, 0.000000, X, Y)
[Tue Aug 28 14:59:30 2012] Writing fullrun_pn_xmm0550452601_pi300-10000_pass1_cl_src1.gif
[Tue Aug 28 14:59:45 2012] Mean detx,y = (210.68, -211.13) 
[Tue Aug 28 14:59:50 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 15:02:35 2012] grppha failed
[Tue Aug 28 15:02:35 2012] Setting source spectrum file to fullrun_pn_xmm0550452601_pi300-10000_pass1_cl_src1_src.pi.gz
[Tue Aug 28 15:02:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550452601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug 28 15:24:26 2012] Updating aperture counts using extracted products
[Tue Aug 28 15:24:26 2012] Error reading totcts from fullrun_pn_xmm0550452601_pi300-10000_pass1_cl_src1_src.pi.gz
[Tue Aug 28 15:24:26 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 15:24:30 2012] Source 1 has no response, skipping
[Tue Aug 28 15:24:31 2012] xmm0550452601/analysis//spectral/fullrun_pn_xmm0550452601_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete