[Tue Aug 28 10:17:20 2012] Detection parameters: Position = (295.6, 290.9) = 9 16 11.82 -62 18 15.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 34.6 +/- 9.1 Background counts = 8.5 Rate = 0.002 +/- 0.0006 [Tue Aug 28 10:17:21 2012] Off-axis axis estimate = 0.58' [Tue Aug 28 12:00:18 2012] Using EEF radius (= 6.72 ")to estimate initial spatial extent for simple fitting [Tue Aug 28 12:00:18 2012] Initial guess for spatial extent in simple fitting = 6.72" [Tue Aug 28 12:00:18 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.956 [Tue Aug 28 12:00:18 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 6.72" [Tue Aug 28 12:29:24 2012] fullrun_mos1_xmm0550452601_pi300-10000_cl_pass0_src11.ximg exists [Tue Aug 28 12:29:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550452601_pi300-10000_cl_pass0_src11.csv [Tue Aug 28 12:29:24 2012] fullrun_mos1_xmm0550452601_pi300-10000_cl_pass0_src11_1.ximg exists [Tue Aug 28 12:29:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550452601_pi300-10000_cl_pass0_src11.csv [Tue Aug 28 12:29:24 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0550452601_pi300-10000_cl_pass0_src11_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0550452601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Aug 28 12:29:25 2012] fullrun_mos1_xmm0550452601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists [Tue Aug 28 12:29:25 2012] fullrun_mos1_xmm0550452601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists [Tue Aug 28 12:29:25 2012] Fit fullrun_mos1_xmm0550452601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly [Tue Aug 28 13:07:03 2012] Spatial fit model total counts = 266.948000, observed total counts = 267.000000 [Tue Aug 28 13:07:03 2012] Offset between fit and detection position for source 4 = 0.472430 pixels [Tue Aug 28 13:07:03 2012] 258.141800 total counts/ 246.813000 bgd. counts: snr = 0.721107 Spatial fit parameters: Offset between fit and detection position for source 4 = 0.472430 pixels Position = (295.4, 291.3) = 9 16 11.97 -62 18 15.7 Extent = 2.0 (1.7-3.9)", rotation angle = 0 Source counts = 11.3 +/- 16.1 Background counts = 246.8 Rate = 0.0007 +/- 0.0009 Deleting source due to low Poisson probability