[Thu Jun  7 05:02:37 2012] Detection parameters:
  Position = (201.4, 372.7) = 21 17 40.50 82 11 47.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.3 +/- 15.3
  Background counts = 65.7
  Rate = 0.01 +/- 0.003

[Thu Jun  7 05:02:37 2012] Off-axis axis estimate = 8.86'
[Thu Jun  7 05:12:57 2012] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 05:12:57 2012] Initial guess for spatial extent in simple fitting = 10.86"
[Thu Jun  7 05:12:57 2012] source mask rpix=2.5, npix_max = 35, mask sum = 33, frac = 0.919
[Thu Jun  7 05:12:57 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.86"
[Thu Jun  7 05:20:05 2012] fullrun_mos2_xmm0550452001_pi300-10000_cl_pass0_src4.ximg exists
[Thu Jun  7 05:20:05 2012] fullrun_mos2_xmm0550452001_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Jun  7 05:20:05 2012] Fit fullrun_mos2_xmm0550452001_pi300-10000_cl_pass0_src4 appears to have run properly
[Thu Jun  7 05:20:05 2012] fullrun_mos2_xmm0550452001_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Jun  7 05:20:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550452001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Jun  7 05:20:05 2012] fullrun_mos2_xmm0550452001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Jun  7 05:20:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550452001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Jun  7 05:20:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550452001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550452001_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 05:20:08 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.506782 pixels away
[Thu Jun  7 05:20:08 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 05:20:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 05:20:08 2012] Assessing source extent using major
[Thu Jun  7 05:20:08 2012] Source does appear to be extended
[Thu Jun  7 05:20:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 05:25:23 2012] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 05:25:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun  7 05:25:23 2012] Initial guess for spatial extent in simple fitting = 10.86"
[Thu Jun  7 05:25:23 2012] source mask rpix=2.5, npix_max = 35, mask sum = 33, frac = 0.919
[Thu Jun  7 05:25:23 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.86"
[Thu Jun  7 05:32:49 2012] fullrun_mos2_xmm0550452001_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jun  7 05:32:49 2012] fullrun_mos2_xmm0550452001_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jun  7 05:32:49 2012] Fit fullrun_mos2_xmm0550452001_pi300-10000_cl_pass1_src3 appears to have run properly
[Thu Jun  7 05:32:49 2012] fullrun_mos2_xmm0550452001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jun  7 05:32:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550452001_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Jun  7 05:32:49 2012] fullrun_mos2_xmm0550452001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jun  7 05:32:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550452001_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Jun  7 05:32:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550452001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550452001_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 05:32:51 2012] Spatial fit model total counts = 624.323000, observed total counts = 576.000000
[Thu Jun  7 05:32:51 2012] Offset between fit and detection position for source 3 = 3.725939 pixels
[Thu Jun  7 05:32:51 2012] 628.761000 total counts/ 519.819000 bgd. counts: snr = 4.778254
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 3.725939 pixels
  Position = (204.5, 370.6) = 21 17 33.80 82 11 37.9
  Extent = 26.7 (16.6-53.5)" x 8.5 (5.5-16.4)", rotation angle = 37 (18-50) degrees
  Source counts = 108.9 +/- 25.1
  Background counts = 519.8
  Rate = 0.03 +/- 0.006
[Thu Jun  7 05:32:51 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 05:32:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 05:32:51 2012] Assessing source extent using major axis lower bound
[Thu Jun  7 05:32:51 2012] Source does appear to be extended
[Thu Jun  7 05:32:51 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.01
[Thu Jun  7 05:38:34 2012] XMMSAS src. selection expression = ellipse(17744.926000, 32196.310000, 1604.970046, 512.281815, 36.683000, X, Y)
[Thu Jun  7 05:38:34 2012] Writing source region out to fullrun_mos2_xmm0550452001_pi300-10000_pass1_cl_src3_src.reg
[Thu Jun  7 05:38:34 2012] Extracting stamp from image fullrun_mos2_xmm0550452001_pi300-10000_cl_sm2.00.img.gz, (112, 278) - (297, 463)
[Thu Jun  7 05:38:34 2012] XMMSAS bgd. selection expression = annulus(17744.926000, 32196.310000, 2674.950077, 5349.900154, X, Y) && !ellipse(20788.281433, 29264.011108, 1740.000000, 1740.000000, 0.000000, X, Y)
[Thu Jun  7 05:38:34 2012] Writing fullrun_mos2_xmm0550452001_pi300-10000_pass1_cl_src3.gif
[Thu Jun  7 05:39:48 2012] Mean detx,y = (543.30, -11889.53) 
[Thu Jun  7 05:39:49 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  7 05:40:10 2012] Binned source spectrum to 10 counts/bin
[Thu Jun  7 05:40:10 2012] Setting source spectrum file to fullrun_mos2_xmm0550452001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jun  7 05:40:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550452001_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Jun  7 05:49:56 2012] Updating aperture counts using extracted products
[Thu Jun  7 05:49:56 2012] Error reading totcts from fullrun_mos2_xmm0550452001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jun  7 05:49:56 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun  7 05:49:56 2012] Using photon index=1.80, rate=0.0258, arf fullrun_mos2_xmm0550452001_pi300-10000_pass1_cl_src3.arf
[Thu Jun  7 05:49:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  7 05:49:56 2012] Updating source flux to 4.5e-13