[Tue Jun 19 10:16:33 2012] Detection parameters:
  Position = (385.5, 346.9) = 19 46 52.93 44 52 34.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.4 +/- 8.6
  Background counts = 10.3
  Rate = 0.004 +/- 0.0007

[Tue Jun 19 10:16:34 2012] Off-axis axis estimate = 7.22'
[Tue Jun 19 11:12:30 2012] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 11:12:30 2012] Initial guess for spatial extent in simple fitting = 10.04"
[Tue Jun 19 11:12:30 2012] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.919
[Tue Jun 19 11:12:30 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.04"
[Tue Jun 19 11:33:08 2012] fullrun_mos2_xmm0550451901_pi300-10000_cl_pass0_src11.ximg exists
[Tue Jun 19 11:33:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451901_pi300-10000_cl_pass0_src11.csv
[Tue Jun 19 11:33:08 2012] fullrun_mos2_xmm0550451901_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Jun 19 11:33:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451901_pi300-10000_cl_pass0_src11.csv
[Tue Jun 19 11:33:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550451901_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550451901_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 11:33:08 2012] fullrun_mos2_xmm0550451901_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Jun 19 11:33:08 2012] fullrun_mos2_xmm0550451901_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Jun 19 11:33:08 2012] Fit fullrun_mos2_xmm0550451901_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Jun 19 11:33:22 2012] Spatial fit model total counts = 164.706000, observed total counts = 150.000000
[Tue Jun 19 11:33:22 2012] Offset between fit and detection position for source 6 = 0.228257 pixels
[Tue Jun 19 11:33:22 2012] 111.154900 total counts/ 80.953300 bgd. counts: snr = 3.356701
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.228257 pixels
  Position = (385.3, 346.8) = 19 46 53.02 44 52 33.4
  Extent = 5.0 (3.6-7.2)", rotation angle = 0
  Source counts = 30.2 +/- 10.5
  Background counts = 81.0
  Rate = 0.002 +/- 0.0006
[Tue Jun 19 11:33:22 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 11:33:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 11:33:22 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 11:33:22 2012] Source does appear to be extended
[Tue Jun 19 11:33:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 12:21:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 19 12:21:38 2012] Initial guess for spatial extent in simple fitting = 5.00"
[Tue Jun 19 12:21:38 2012] source mask rpix=1.2, npix_max = 10, mask sum = 9, frac = 0.826
[Tue Jun 19 12:21:38 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 5.00"
[Tue Jun 19 12:41:03 2012] fullrun_mos2_xmm0550451901_pi300-10000_cl_pass1_src11.ximg exists
[Tue Jun 19 12:41:03 2012] fullrun_mos2_xmm0550451901_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Jun 19 12:41:03 2012] Fit fullrun_mos2_xmm0550451901_pi300-10000_cl_pass1_src11 appears to have run properly
[Tue Jun 19 12:41:03 2012] fullrun_mos2_xmm0550451901_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Jun 19 12:41:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451901_pi300-10000_cl_pass1_tfrozen_src11.csv
[Tue Jun 19 12:41:03 2012] fullrun_mos2_xmm0550451901_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Jun 19 12:41:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451901_pi300-10000_cl_pass1_tfrozen_src11.csv
[Tue Jun 19 12:41:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550451901_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550451901_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 12:41:13 2012] Warning, spatial fit 11 centroid is now closest to src. 7
[Tue Jun 19 12:41:13 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 12:41:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 12:41:13 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 12:41:13 2012] Source does appear to be extended
[Tue Jun 19 12:41:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 13:38:03 2012] XMMSAS src. selection expression = ellipse(33470.555000, 30125.864320, 300.166809, 300.166809, 0.000000, X, Y)
[Tue Jun 19 13:38:03 2012] Writing source region out to fullrun_mos2_xmm0550451901_pi300-10000_pass1_cl_src6_src.reg
[Tue Jun 19 13:38:03 2012] Extracting stamp from image fullrun_mos2_xmm0550451901_pi300-10000_cl_sm2.00.img.gz, (368, 330) - (403, 364)
[Tue Jun 19 13:38:03 2012] XMMSAS bgd. selection expression = annulus(33470.555000, 30125.864320, 500.278014, 1000.556029, X, Y) && !ellipse(32779.469025, 30161.368530, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 19 13:38:03 2012] Writing fullrun_mos2_xmm0550451901_pi300-10000_pass1_cl_src6.gif
[Tue Jun 19 13:41:03 2012] Mean detx,y = (-2567.62, 6143.00) 
[Tue Jun 19 13:41:04 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 13:41:12 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 13:41:12 2012] Setting source spectrum file to fullrun_mos2_xmm0550451901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jun 19 13:41:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550451901_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Jun 19 13:50:58 2012] Not generating rmf since there are only 30 counts
[Tue Jun 19 13:50:58 2012] rmf not generated due to insufficient counts
[Tue Jun 19 13:51:57 2012] Updating aperture counts using extracted products
[Tue Jun 19 13:51:57 2012] Error reading totcts from fullrun_mos2_xmm0550451901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jun 19 13:51:58 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 13:51:58 2012] Using photon index=1.80, rate=0.00172, arf fullrun_mos2_xmm0550451901_pi300-10000_pass1_cl_src6.arf
[Tue Jun 19 13:51:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 13:51:58 2012] Updating source flux to 3.4e-14
[Tue Jun 19 13:52:27 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting