[Tue Jun 19 10:16:33 2012] Detection parameters:
  Position = (321.1, 306.9) = 19 47 19.29 44 49 40.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4345.9 +/- 77.3
  Background counts = 9.3
  Rate = 0.3 +/- 0.005

[Tue Jun 19 10:16:34 2012] Off-axis axis estimate = 1.75'
[Tue Jun 19 11:12:30 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 11:12:30 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Tue Jun 19 11:12:30 2012] source mask rpix=1.7, npix_max = 18, mask sum = 15, frac = 0.790
[Tue Jun 19 11:12:30 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Tue Jun 19 11:33:08 2012] fullrun_mos2_xmm0550451901_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 19 11:33:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451901_pi300-10000_cl_pass0_src1.csv
[Tue Jun 19 11:33:08 2012] fullrun_mos2_xmm0550451901_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 19 11:33:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451901_pi300-10000_cl_pass0_src1.csv
[Tue Jun 19 11:33:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550451901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550451901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 11:33:08 2012] fullrun_mos2_xmm0550451901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 19 11:33:08 2012] fullrun_mos2_xmm0550451901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 19 11:33:08 2012] Fit fullrun_mos2_xmm0550451901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 19 11:33:22 2012] Spatial fit model total counts = 4008.150000, observed total counts = 3896.000000
[Tue Jun 19 11:33:22 2012] Offset between fit and detection position for source 2 = 0.126798 pixels
[Tue Jun 19 11:33:22 2012] 4003.280000 total counts/ 1069.080000 bgd. counts: snr = 89.739699
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.126798 pixels
  Position = (321.1, 307.0) = 19 47 19.31 44 49 40.3
  Extent = 4.8 (4.7-5.0)", rotation angle = 0
  Source counts = 2934.2 +/- 63.3
  Background counts = 1069.1
  Rate = 0.2 +/- 0.004
[Tue Jun 19 11:33:22 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 11:33:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 11:33:22 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 11:33:22 2012] Source does appear to be extended
[Tue Jun 19 11:33:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 12:21:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 19 12:21:38 2012] Initial guess for spatial extent in simple fitting = 4.81"
[Tue Jun 19 12:21:38 2012] source mask rpix=1.1, npix_max = 10, mask sum = 15, frac = 1.455
[Tue Jun 19 12:21:38 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.81"
[Tue Jun 19 12:41:03 2012] fullrun_mos2_xmm0550451901_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 19 12:41:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550451901_pi300-10000_cl_pass1_src1.csv
[Tue Jun 19 12:41:03 2012] fullrun_mos2_xmm0550451901_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 19 12:41:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550451901_pi300-10000_cl_pass1_src1.csv
[Tue Jun 19 12:41:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550451901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550451901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 12:41:03 2012] fullrun_mos2_xmm0550451901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 19 12:41:03 2012] fullrun_mos2_xmm0550451901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 19 12:41:03 2012] Fit fullrun_mos2_xmm0550451901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 19 12:41:13 2012] Spatial fit model total counts = 4008.150000, observed total counts = 3896.000000
[Tue Jun 19 12:41:13 2012] Offset between fit and detection position for source 2 = 0.000000 pixels
[Tue Jun 19 12:41:13 2012] 4003.280000 total counts/ 1069.070000 bgd. counts: snr = 89.740425
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000000 pixels
  Position = (321.1, 307.0) = 19 47 19.31 44 49 40.3
  Extent = 4.8 (4.7-5.0)", rotation angle = 0
  Source counts = 2934.2 +/- 63.3
  Background counts = 1069.1
  Rate = 0.2 +/- 0.004
[Tue Jun 19 12:41:13 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 12:41:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 12:41:13 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 12:41:13 2012] Source does appear to be extended
[Tue Jun 19 12:41:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 13:38:02 2012] Counts = 2934.210000, rescaling region sizes by 2.000000
[Tue Jun 19 13:38:02 2012] XMMSAS src. selection expression = ellipse(27883.120380, 26658.825000, 577.113617, 577.113617, 0.000000, X, Y)
[Tue Jun 19 13:38:02 2012] Writing source region out to fullrun_mos2_xmm0550451901_pi300-10000_pass1_cl_src2_src.reg
[Tue Jun 19 13:38:02 2012] Extracting stamp from image fullrun_mos2_xmm0550451901_pi300-10000_cl_sm2.00.img.gz, (288, 274) - (354, 340)
[Tue Jun 19 13:38:02 2012] XMMSAS bgd. selection expression = annulus(27883.120380, 26658.825000, 1923.712055, 3847.424111, X, Y) && !ellipse(30373.622192, 30380.546509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27990.730000, 24768.652400, 467.409613, 467.409613, 0.000000, X, Y) && !ellipse(29529.431732, 27402.214294, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 19 13:38:02 2012] Writing fullrun_mos2_xmm0550451901_pi300-10000_pass1_cl_src2.gif
[Tue Jun 19 13:38:05 2012] Mean detx,y = (16.94, 109.17) 
[Tue Jun 19 13:38:06 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 13:38:19 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 13:38:19 2012] Setting source spectrum file to fullrun_mos2_xmm0550451901_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jun 19 13:38:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550451901_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jun 19 13:51:57 2012] Updating aperture counts using extracted products
[Tue Jun 19 13:51:57 2012] Error reading totcts from fullrun_mos2_xmm0550451901_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jun 19 13:51:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 13:51:57 2012] Using photon index=1.80, rate=0.167, arf fullrun_mos2_xmm0550451901_pi300-10000_pass1_cl_src2.arf
[Tue Jun 19 13:51:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 13:51:57 2012] Updating source flux to 1.9e-12
[Tue Jun 19 13:52:53 2012] Reading fit data from xmm0550451901/analysis//spectral/fullrun_mos2_xmm0550451901_pi300-10000_pass1_cl_src2_pl.csv
[Tue Jun 19 13:52:53 2012] Spectral fit parameter nH value = 6.81774e+22
[Tue Jun 19 13:52:53 2012] Spectral fit parameter PhoIndex value = 1.75378
[Tue Jun 19 13:52:53 2012] Failed to get F(0.3-8.0) from xmm0550451901/analysis//spectral/fullrun_mos2_xmm0550451901_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Jun 19 13:52:53 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 13:52:53 2012] Using Nh = 6.8e+22, photon index=1.75, rate=0.167, arf fullrun_mos2_xmm0550451901_pi300-10000_pass1_cl_src2.arf
[Tue Jun 19 13:52:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 13:52:53 2012] Updating source flux to 5.4e-12