[Tue Jun 19 10:16:12 2012] Detection parameters:
  Position = (310.5, 143.9) = 19 47 23.64 44 37 50.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.5 +/- 11.1
  Background counts = 6.0
  Rate = 0.004 +/- 0.0006

[Tue Jun 19 10:16:12 2012] Off-axis axis estimate = 11.24'
[Tue Jun 19 10:54:54 2012] Using EEF radius (= 12.05 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 10:54:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 19 10:54:54 2012] Initial guess for spatial extent in simple fitting = 12.05"
[Tue Jun 19 10:54:54 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.982
[Tue Jun 19 10:54:54 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 12.05"
[Tue Jun 19 11:12:29 2012] fullrun_mos1_xmm0550451901_pi300-10000_cl_pass0_src7.ximg exists
[Tue Jun 19 11:12:29 2012] fullrun_mos1_xmm0550451901_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Jun 19 11:12:29 2012] Fit fullrun_mos1_xmm0550451901_pi300-10000_cl_pass0_src7 appears to have run properly
[Tue Jun 19 11:12:30 2012] fullrun_mos1_xmm0550451901_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Jun 19 11:12:30 2012] fullrun_mos1_xmm0550451901_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Jun 19 11:12:30 2012] Fit fullrun_mos1_xmm0550451901_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Jun 19 11:33:18 2012] Spatial fit model total counts = 128.181000, observed total counts = 121.000000
[Tue Jun 19 11:33:18 2012] Offset between fit and detection position for source 10 = 0.046163 pixels
[Tue Jun 19 11:33:18 2012] 129.919300 total counts/ 71.301700 bgd. counts: snr = 6.941896
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.046163 pixels
  Position = (310.5, 143.9) = 19 47 23.64 44 37 51.2
  Extent = 7.2 (5.6-9.2)", rotation angle = 0
  Source counts = 58.6 +/- 11.4
  Background counts = 71.3
  Rate = 0.003 +/- 0.0006
[Tue Jun 19 11:33:18 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 11:33:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 11:33:18 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 11:33:18 2012] Source does appear to be extended
[Tue Jun 19 11:33:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 12:05:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 19 12:05:20 2012] Initial guess for spatial extent in simple fitting = 7.21"
[Tue Jun 19 12:05:20 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.075
[Tue Jun 19 12:05:20 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 7.21"
[Tue Jun 19 12:21:38 2012] fullrun_mos1_xmm0550451901_pi300-10000_cl_pass1_src7.ximg exists
[Tue Jun 19 12:21:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550451901_pi300-10000_cl_pass1_src7.csv
[Tue Jun 19 12:21:38 2012] fullrun_mos1_xmm0550451901_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Jun 19 12:21:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550451901_pi300-10000_cl_pass1_src7.csv
[Tue Jun 19 12:21:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550451901_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550451901_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 12:21:38 2012] fullrun_mos1_xmm0550451901_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Jun 19 12:21:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550451901_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue Jun 19 12:21:38 2012] fullrun_mos1_xmm0550451901_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Jun 19 12:21:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550451901_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue Jun 19 12:21:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550451901_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550451901_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 12:41:10 2012] Warning, spatial fit 7 centroid is now closest to src. 3
[Tue Jun 19 12:41:10 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 12:41:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 12:41:10 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 12:41:10 2012] Source does appear to be extended
[Tue Jun 19 12:41:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 13:25:08 2012] XMMSAS src. selection expression = ellipse(26965.019771, 12474.669800, 432.505812, 432.505812, 0.000000, X, Y)
[Tue Jun 19 13:25:08 2012] Writing source region out to fullrun_mos1_xmm0550451901_pi300-10000_pass1_cl_src10_src.reg
[Tue Jun 19 13:25:08 2012] Extracting stamp from image fullrun_mos1_xmm0550451901_pi300-10000_cl_sm2.00.img.gz, (286, 119) - (335, 169)
[Tue Jun 19 13:25:08 2012] XMMSAS bgd. selection expression = annulus(26965.019771, 12474.669800, 720.843021, 1441.686041, X, Y)
[Tue Jun 19 13:25:08 2012] Writing fullrun_mos1_xmm0550451901_pi300-10000_pass1_cl_src10.gif
[Tue Jun 19 13:27:23 2012] Mean detx,y = (-11856.00, 7132.16) 
[Tue Jun 19 13:27:26 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 13:27:42 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 13:27:42 2012] Setting source spectrum file to fullrun_mos1_xmm0550451901_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Jun 19 13:27:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550451901_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Jun 19 13:37:54 2012] Not generating rmf since there are only 58 counts
[Tue Jun 19 13:37:54 2012] rmf not generated due to insufficient counts
[Tue Jun 19 13:51:56 2012] Updating aperture counts using extracted products
[Tue Jun 19 13:51:56 2012] Error reading totcts from fullrun_mos1_xmm0550451901_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Jun 19 13:51:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 13:51:57 2012] Using photon index=1.80, rate=0.00334, arf fullrun_mos1_xmm0550451901_pi300-10000_pass1_cl_src10.arf
[Tue Jun 19 13:51:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 13:51:57 2012] Updating source flux to 8e-14
[Tue Jun 19 13:51:59 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting