[Tue Jul  3 10:26:53 2012] Detection parameters:
  Position = (281.8, 281.0) = 19 42 40.51 -10 19 24.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 190635.5 +/- 516.3
  Background counts = 135.1
  Rate = 7 +/- 0.02

[Tue Jul  3 10:26:54 2012] Off-axis axis estimate = 1.75'
[Tue Jul  3 10:30:21 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 10:30:21 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Tue Jul  3 10:30:21 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Tue Jul  3 10:30:21 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Tue Jul  3 12:00:18 2012] fullrun_pn_xmm0550451801_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul  3 12:00:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550451801_pi300-10000_cl_pass0_src1.csv
[Tue Jul  3 12:00:18 2012] fullrun_pn_xmm0550451801_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul  3 12:00:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550451801_pi300-10000_cl_pass0_src1.csv
[Tue Jul  3 12:00:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550451801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550451801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 12:00:18 2012] fullrun_pn_xmm0550451801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul  3 12:00:18 2012] fullrun_pn_xmm0550451801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul  3 12:00:18 2012] Fit fullrun_pn_xmm0550451801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jul  3 13:26:28 2012] Spatial fit model total counts = 126823.000000, observed total counts = 126367.000000
[Tue Jul  3 13:26:28 2012] Offset between fit and detection position for source 1 = 0.055764 pixels
[Tue Jul  3 13:26:28 2012] 126502.000000 total counts/ 25600.000000 bgd. counts: snr = 630.637500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.055764 pixels
  Position = (281.8, 281.1) = 19 42 40.52 -10 19 24.5
  Extent = 6.1 (6.1-6.2)", rotation angle = 0
  Source counts = 100902.0 +/- 355.7
  Background counts = 25600.0
  Rate = 6 +/- 0.02
[Tue Jul  3 13:26:28 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 13:26:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 13:26:28 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 13:26:28 2012] Source does appear to be extended
[Tue Jul  3 13:26:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 13:26:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul  3 13:26:40 2012] Initial guess for spatial extent in simple fitting = 6.13"
[Tue Jul  3 13:26:40 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.098
[Tue Jul  3 13:26:40 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.13"
[Tue Jul  3 14:47:00 2012] fullrun_pn_xmm0550451801_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jul  3 14:47:00 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0550451801_pi300-10000_cl_pass1_src1.csv
[Tue Jul  3 14:47:00 2012] fullrun_pn_xmm0550451801_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jul  3 14:47:00 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0550451801_pi300-10000_cl_pass1_src1.csv
[Tue Jul  3 14:47:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550451801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550451801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 14:47:01 2012] fullrun_pn_xmm0550451801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jul  3 14:47:01 2012] fullrun_pn_xmm0550451801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jul  3 14:47:01 2012] Fit fullrun_pn_xmm0550451801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jul  3 15:44:17 2012] Spatial fit model total counts = 126859.000000, observed total counts = 126367.000000
[Tue Jul  3 15:44:17 2012] Offset between fit and detection position for source 1 = 0.000108 pixels
[Tue Jul  3 15:44:17 2012] 126537.000000 total counts/ 25600.000000 bgd. counts: snr = 630.856250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000108 pixels
  Position = (281.8, 281.1) = 19 42 40.52 -10 19 24.5
  Extent = 6.1 (6.1-6.2)", rotation angle = 0
  Source counts = 100937.0 +/- 355.7
  Background counts = 25600.0
  Rate = 6 +/- 0.02
[Tue Jul  3 15:44:17 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 15:44:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 15:44:17 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 15:44:17 2012] Source does appear to be extended
[Tue Jul  3 15:44:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 15:44:24 2012] Counts = 100937.000000, rescaling region sizes by 3.000000
[Tue Jul  3 15:44:24 2012] XMMSAS src. selection expression = ellipse(24467.163880, 24406.651000, 1102.350632, 1102.350632, 0.000000, X, Y)
[Tue Jul  3 15:44:24 2012] Writing source region out to fullrun_pn_xmm0550451801_pi300-10000_pass1_cl_src1_src.reg
[Tue Jul  3 15:44:24 2012] Extracting stamp from image fullrun_pn_xmm0550451801_pi300-10000_cl_sm2.00.img.gz, (218, 218) - (345, 344)
[Tue Jul  3 15:44:24 2012] XMMSAS bgd. selection expression = annulus(24467.163880, 24406.651000, 5511.753159, 11023.506317, X, Y) && !ellipse(26778.346600, 35964.928000, 934.720027, 934.720027, 0.000000, X, Y) && !ellipse(18467.457932, 36134.706543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24385.126617, 36138.556335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26691.449677, 35447.234497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26526.767424, 34683.170449, 2931.728084, 465.246601, 102.420369, X, Y) && !ellipse(26384.168000, 33962.506400, 2931.728084, 487.962414, 101.487000, X, Y) && !ellipse(19330.272095, 33506.838196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26263.296997, 33356.794525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26028.133000, 32254.136000, 1192.912034, 1192.912034, 0.000000, X, Y) && !ellipse(25950.021800, 32115.310000, 1229.960035, 1229.960035, 0.000000, X, Y) && !ellipse(25881.083400, 31460.610000, 828.264024, 828.264024, 0.000000, X, Y) && !ellipse(25878.126200, 31422.814000, 963.872028, 963.872028, 0.000000, X, Y) && !ellipse(25542.001000, 29748.442000, 1251.584036, 1251.584036, 0.000000, X, Y) && !ellipse(34105.361450, 29331.640015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25413.110400, 29182.426000, 969.240028, 343.876010, 100.131062, X, Y) && !ellipse(25362.822400, 28925.936000, 801.336023, 801.336023, 0.000000, X, Y) && !ellipse(28470.434000, 28229.200400, 486.694866, 486.694866, 0.000000, X, Y) && !ellipse(25280.729800, 28488.006000, 1226.144035, 1226.144035, 0.000000, X, Y) && !ellipse(24996.816400, 27053.530000, 1110.832032, 358.211210, 284.335000, X, Y) && !ellipse(25544.076111, 26846.338776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23677.068000, 26410.366000, 1198.592034, 458.317613, 68.857988, X, Y) && !ellipse(24928.181000, 26655.596161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18403.228790, 24381.667114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22841.585510, 23558.053131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23293.795410, 23251.479553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24011.208221, 23219.032440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27696.333130, 18789.082870, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul  3 15:44:24 2012] Writing fullrun_pn_xmm0550451801_pi300-10000_pass1_cl_src1.gif
[Tue Jul  3 15:44:40 2012] Mean detx,y = (67.47, -279.18) 
[Tue Jul  3 15:44:44 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  3 15:47:29 2012] Binned source spectrum to 10 counts/bin
[Tue Jul  3 15:47:29 2012] Setting source spectrum file to fullrun_pn_xmm0550451801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul  3 15:47:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550451801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jul  3 17:46:46 2012] Updating aperture counts using extracted products
[Tue Jul  3 17:46:46 2012] Error reading totcts from fullrun_pn_xmm0550451801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul  3 17:46:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 17:46:47 2012] Using photon index=1.80, rate=6.25, arf fullrun_pn_xmm0550451801_pi300-10000_pass1_cl_src1.arf
[Tue Jul  3 17:46:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 17:46:47 2012] Updating source flux to 1.5e-11
[Tue Jul  3 17:49:16 2012] Reading fit data from xmm0550451801/analysis//spectral/fullrun_pn_xmm0550451801_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jul  3 17:49:16 2012] Spectral fit parameter nH value = 9.11887e+20
[Tue Jul  3 17:49:16 2012] Spectral fit parameter PhoIndex value = 1.75056
[Tue Jul  3 17:49:16 2012] Failed to get F(0.3-8.0) from xmm0550451801/analysis//spectral/fullrun_pn_xmm0550451801_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jul  3 17:49:16 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 17:49:16 2012] Using Nh = 9.1e+20, photon index=1.75, rate=6.25, arf fullrun_pn_xmm0550451801_pi300-10000_pass1_cl_src1.arf
[Tue Jul  3 17:49:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 17:49:16 2012] Updating source flux to 1.9e-11