[Tue Jul  3 10:27:31 2012] Detection parameters:
  Position = (268.5, 266.8) = 19 42 44.44 -10 20 24.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.0 +/- 16.3
  Background counts = 56.5
  Rate = 0.003 +/- 0.0006

[Tue Jul  3 10:27:31 2012] Off-axis axis estimate = 3.16'
[Tue Jul  3 12:16:46 2012] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 12:16:46 2012] Initial guess for spatial extent in simple fitting = 8.01"
[Tue Jul  3 12:16:46 2012] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.867
[Tue Jul  3 12:16:46 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 8.01"
[Tue Jul  3 13:26:20 2012] fullrun_mos2_xmm0550451801_pi300-10000_cl_pass0_src14.ximg exists
[Tue Jul  3 13:26:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451801_pi300-10000_cl_pass0_src14.csv
[Tue Jul  3 13:26:20 2012] fullrun_mos2_xmm0550451801_pi300-10000_cl_pass0_src14_1.ximg exists
[Tue Jul  3 13:26:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451801_pi300-10000_cl_pass0_src14.csv
[Tue Jul  3 13:26:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550451801_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550451801_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 13:26:21 2012] fullrun_mos2_xmm0550451801_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Tue Jul  3 13:26:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550451801_pi300-10000_cl_pass0_tfrozen_src14.csv
[Tue Jul  3 13:26:21 2012] fullrun_mos2_xmm0550451801_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Tue Jul  3 13:26:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550451801_pi300-10000_cl_pass0_tfrozen_src14.csv
[Tue Jul  3 13:26:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550451801_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550451801_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 13:26:34 2012] Spatial fit model total counts = 658.943000, observed total counts = 2530.000000
[Tue Jul  3 13:26:34 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul  3 13:26:34 2012] Spatial fit model total counts = 1326.000000, observed total counts = 1089.000000
[Tue Jul  3 13:26:34 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul  3 13:26:34 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 13:26:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 13:26:34 2012] Assessing source extent using major
[Tue Jul  3 13:26:34 2012] Source does appear to be extended
[Tue Jul  3 13:26:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 13:26:34 2012] Deleting source due to low Poisson probability 0.9