[Wed Jul 11 21:21:28 2012] Detection parameters:
  Position = (273.1, 293.0) = 19 37 35.16 -6 12 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 398.1 +/- 30.5
  Background counts = 23.0
  Rate = 0.03 +/- 0.002

[Wed Jul 11 21:21:28 2012] Off-axis axis estimate = 1.88'
[Wed Jul 11 21:59:46 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 21:59:46 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Wed Jul 11 21:59:46 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.779
[Wed Jul 11 21:59:46 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.37"
[Wed Jul 11 23:20:12 2012] fullrun_mos2_xmm0550451701_pi300-10000_cl_pass0_src4.ximg exists
[Wed Jul 11 23:20:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451701_pi300-10000_cl_pass0_src4.csv
[Wed Jul 11 23:20:12 2012] fullrun_mos2_xmm0550451701_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Jul 11 23:20:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451701_pi300-10000_cl_pass0_src4.csv
[Wed Jul 11 23:20:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550451701_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550451701_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 23:20:13 2012] fullrun_mos2_xmm0550451701_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Jul 11 23:20:13 2012] fullrun_mos2_xmm0550451701_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Jul 11 23:20:13 2012] Fit fullrun_mos2_xmm0550451701_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Jul 11 23:20:21 2012] Spatial fit model total counts = 5070.450000, observed total counts = 5667.000000
[Wed Jul 11 23:20:21 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 11 23:20:21 2012] Source 4 is offset by 6.755558 and -3.629398 pixels which is larger than
2 X fitted extent = 6.268598 x 6.268598, not incorporating fit results
[Wed Jul 11 23:20:21 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:20:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:20:21 2012] Assessing source extent using major
[Wed Jul 11 23:20:21 2012] Source does appear to be extended
[Wed Jul 11 23:20:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 23:20:21 2012] Source is confused with source 2
[Wed Jul 11 23:39:42 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 23:39:42 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Wed Jul 11 23:39:42 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.779
[Wed Jul 11 23:39:42 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.37"
[Thu Jul 12 00:10:06 2012] fullrun_mos2_xmm0550451701_pi300-10000_cl_pass1_src4.ximg exists
[Thu Jul 12 00:10:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451701_pi300-10000_cl_pass1_src4.csv
[Thu Jul 12 00:10:06 2012] fullrun_mos2_xmm0550451701_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Jul 12 00:10:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451701_pi300-10000_cl_pass1_src4.csv
[Thu Jul 12 00:10:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550451701_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550451701_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 00:10:06 2012] fullrun_mos2_xmm0550451701_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Jul 12 00:10:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451701_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Jul 12 00:10:06 2012] fullrun_mos2_xmm0550451701_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Jul 12 00:10:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451701_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Jul 12 00:10:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550451701_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550451701_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 00:10:11 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.021305 pixels away
[Thu Jul 12 00:10:11 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.344710 pixels away
[Thu Jul 12 00:10:11 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 33.226831 pixels away
[Thu Jul 12 00:10:11 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 00:10:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 00:10:11 2012] Assessing source extent using major
[Thu Jul 12 00:10:11 2012] Source does appear to be extended
[Thu Jul 12 00:10:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 00:50:11 2012] XMMSAS src. selection expression = ellipse(23710.815552, 25446.068359, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 12 00:50:11 2012] Writing source region out to fullrun_mos2_xmm0550451701_pi300-10000_pass1_cl_src4_src.reg
[Thu Jul 12 00:50:11 2012] Extracting stamp from image fullrun_mos2_xmm0550451701_pi300-10000_cl_sm2.00.img.gz, (236, 256) - (311, 331)
[Thu Jul 12 00:50:11 2012] XMMSAS bgd. selection expression = annulus(23710.815552, 25446.068359, 1087.500000, 2175.000000, X, Y) && !ellipse(24392.747960, 24560.404760, 1609.156846, 1609.156846, 0.000000, X, Y) && !ellipse(23454.501678, 24242.336487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23497.064453, 24924.084290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22104.408600, 27524.493400, 370.217612, 370.217612, 0.000000, X, Y) && !ellipse(23075.128000, 23299.340000, 461.530413, 461.530413, 0.000000, X, Y) && !ellipse(23359.826200, 27427.252000, 1235.256036, 328.288009, 250.924000, X, Y) && !ellipse(26405.412000, 25291.042000, 1103.312032, 1103.312032, 0.000000, X, Y)
[Thu Jul 12 00:50:11 2012] Writing fullrun_mos2_xmm0550451701_pi300-10000_pass1_cl_src4.gif
[Thu Jul 12 00:54:30 2012] Mean detx,y = (-680.60, -509.72) 
[Thu Jul 12 00:54:31 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 00:54:40 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 00:54:40 2012] Setting source spectrum file to fullrun_mos2_xmm0550451701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jul 12 00:54:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550451701_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Jul 12 01:00:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 12 01:00:09 2012] rmf not generated due to insufficient counts
[Thu Jul 12 01:11:36 2012] Updating aperture counts using extracted products
[Thu Jul 12 01:11:36 2012] Error reading totcts from fullrun_mos2_xmm0550451701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jul 12 01:11:36 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 01:11:36 2012] Using photon index=1.80, rate=0.0252, arf fullrun_mos2_xmm0550451701_pi300-10000_pass1_cl_src4.arf
[Thu Jul 12 01:11:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 01:11:36 2012] Updating source flux to 2.8e-13
[Thu Jul 12 01:11:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting