[Wed Jul 11 21:21:28 2012] Detection parameters:
  Position = (280.8, 282.9) = 19 37 32.90 -6 13 4.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69634.4 +/- 311.9
  Background counts = 21.5
  Rate = 4 +/- 0.02

[Wed Jul 11 21:21:28 2012] Off-axis axis estimate = 1.70'
[Wed Jul 11 21:59:46 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 21:59:46 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Wed Jul 11 21:59:46 2012] source mask rpix=1.7, npix_max = 18, mask sum = 12, frac = 0.635
[Wed Jul 11 21:59:46 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Wed Jul 11 23:20:12 2012] fullrun_mos2_xmm0550451701_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 11 23:20:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451701_pi300-10000_cl_pass0_src1.csv
[Wed Jul 11 23:20:12 2012] fullrun_mos2_xmm0550451701_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 11 23:20:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451701_pi300-10000_cl_pass0_src1.csv
[Wed Jul 11 23:20:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550451701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550451701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 23:20:13 2012] fullrun_mos2_xmm0550451701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 11 23:20:13 2012] fullrun_mos2_xmm0550451701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 11 23:20:13 2012] Fit fullrun_mos2_xmm0550451701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jul 11 23:20:21 2012] Spatial fit model total counts = 69142.300000, observed total counts = 67906.000000
[Wed Jul 11 23:20:21 2012] Offset between fit and detection position for source 1 = 0.123597 pixels
[Wed Jul 11 23:20:21 2012] 68958.500000 total counts/ 17060.900000 bgd. counts: snr = 397.325378
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.123597 pixels
  Position = (280.9, 282.9) = 19 37 32.87 -6 13 5.5
  Extent = 6.6 (6.6-6.7)", rotation angle = 0
  Source counts = 51897.6 +/- 262.6
  Background counts = 17060.9
  Rate = 3 +/- 0.01
[Wed Jul 11 23:20:21 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:20:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:20:21 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 23:20:21 2012] Source does appear to be extended
[Wed Jul 11 23:20:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 23:39:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 11 23:39:42 2012] Initial guess for spatial extent in simple fitting = 6.65"
[Wed Jul 11 23:39:42 2012] source mask rpix=1.5, npix_max = 16, mask sum = 12, frac = 0.729
[Wed Jul 11 23:39:42 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.65"
[Thu Jul 12 00:10:06 2012] fullrun_mos2_xmm0550451701_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jul 12 00:10:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451701_pi300-10000_cl_pass1_src1.csv
[Thu Jul 12 00:10:06 2012] fullrun_mos2_xmm0550451701_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jul 12 00:10:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451701_pi300-10000_cl_pass1_src1.csv
[Thu Jul 12 00:10:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550451701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550451701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 00:10:06 2012] fullrun_mos2_xmm0550451701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul 12 00:10:06 2012] fullrun_mos2_xmm0550451701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul 12 00:10:06 2012] Fit fullrun_mos2_xmm0550451701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jul 12 00:10:11 2012] Spatial fit model total counts = 69028.600000, observed total counts = 67937.000000
[Thu Jul 12 00:10:11 2012] Offset between fit and detection position for source 1 = 0.021078 pixels
[Thu Jul 12 00:10:11 2012] 69228.000000 total counts/ 16950.000000 bgd. counts: snr = 401.544899
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.021078 pixels
  Position = (280.9, 282.9) = 19 37 32.88 -6 13 5.6
  Extent = 6.7 (6.6-6.8)", rotation angle = 0
  Source counts = 52278.0 +/- 263.1
  Background counts = 16950.0
  Rate = 3 +/- 0.01
[Thu Jul 12 00:10:11 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 00:10:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 00:10:11 2012] Assessing source extent using major axis lower bound
[Thu Jul 12 00:10:11 2012] Source does appear to be extended
[Thu Jul 12 00:10:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 00:50:11 2012] Counts = 52278.000000, rescaling region sizes by 3.000000
[Thu Jul 12 00:50:11 2012] XMMSAS src. selection expression = ellipse(24392.747960, 24560.404760, 1206.867635, 1206.867635, 0.000000, X, Y)
[Thu Jul 12 00:50:11 2012] Writing source region out to fullrun_mos2_xmm0550451701_pi300-10000_pass1_cl_src1_src.reg
[Thu Jul 12 00:50:11 2012] Extracting stamp from image fullrun_mos2_xmm0550451701_pi300-10000_cl_sm2.00.img.gz, (212, 214) - (350, 352)
[Thu Jul 12 00:50:11 2012] XMMSAS bgd. selection expression = annulus(24392.747960, 24560.404760, 6034.338174, 12068.676347, X, Y) && !ellipse(23454.501678, 24242.336487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23497.064453, 24924.084290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23710.815552, 25446.068359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24090.228600, 30451.347600, 348.571210, 348.571210, 0.000000, X, Y) && !ellipse(22104.408600, 27524.493400, 370.217612, 370.217612, 0.000000, X, Y) && !ellipse(23075.128000, 23299.340000, 461.530413, 461.530413, 0.000000, X, Y) && !ellipse(23359.826200, 27427.252000, 1235.256036, 328.288009, 250.924000, X, Y) && !ellipse(26405.412000, 25291.042000, 1103.312032, 1103.312032, 0.000000, X, Y)
[Thu Jul 12 00:50:11 2012] Writing fullrun_mos2_xmm0550451701_pi300-10000_pass1_cl_src1.gif
[Thu Jul 12 00:50:18 2012] Mean detx,y = (46.57, 40.06) 
[Thu Jul 12 00:50:20 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 00:54:01 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 00:54:01 2012] Setting source spectrum file to fullrun_mos2_xmm0550451701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 12 00:54:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550451701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jul 12 01:11:36 2012] Updating aperture counts using extracted products
[Thu Jul 12 01:11:36 2012] Error reading totcts from fullrun_mos2_xmm0550451701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 12 01:11:36 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 01:11:36 2012] Using photon index=1.80, rate=2.97, arf fullrun_mos2_xmm0550451701_pi300-10000_pass1_cl_src1.arf
[Thu Jul 12 01:11:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 01:11:36 2012] Updating source flux to 2.9e-11
[Thu Jul 12 01:12:31 2012] Reading fit data from xmm0550451701/analysis//spectral/fullrun_mos2_xmm0550451701_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jul 12 01:12:31 2012] Spectral fit parameter nH value = 1.04047e+21
[Thu Jul 12 01:12:31 2012] Spectral fit parameter PhoIndex value = 2.3075
[Thu Jul 12 01:12:31 2012] Failed to get F(0.3-8.0) from xmm0550451701/analysis//spectral/fullrun_mos2_xmm0550451701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jul 12 01:12:31 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 01:12:31 2012] Using Nh = 1e+21, photon index=2.31, rate=2.97, arf fullrun_mos2_xmm0550451701_pi300-10000_pass1_cl_src1.arf
[Thu Jul 12 01:12:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 01:12:31 2012] Updating source flux to 2.6e-11