[Wed Jul 11 21:21:06 2012] Detection parameters:
  Position = (254.8, 317.0) = 19 37 40.50 -6 10 36.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 168.5 +/- 17.3
  Background counts = 23.5
  Rate = 0.01 +/- 0.001

[Wed Jul 11 21:21:06 2012] Off-axis axis estimate = 3.44'
[Wed Jul 11 21:38:18 2012] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 21:38:18 2012] Initial guess for spatial extent in simple fitting = 8.15"
[Wed Jul 11 21:38:18 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.888
[Wed Jul 11 21:38:18 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.15"
[Wed Jul 11 21:59:45 2012] fullrun_mos1_xmm0550451701_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jul 11 21:59:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550451701_pi300-10000_cl_pass0_src3.csv
[Wed Jul 11 21:59:45 2012] fullrun_mos1_xmm0550451701_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jul 11 21:59:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550451701_pi300-10000_cl_pass0_src3.csv
[Wed Jul 11 21:59:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550451701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550451701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 21:59:46 2012] fullrun_mos1_xmm0550451701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jul 11 21:59:46 2012] fullrun_mos1_xmm0550451701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jul 11 21:59:46 2012] Fit fullrun_mos1_xmm0550451701_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Jul 11 23:20:18 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.164919 pixels away
[Wed Jul 11 23:20:18 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:20:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:20:18 2012] Assessing source extent using major
[Wed Jul 11 23:20:18 2012] Source does appear to be extended
[Wed Jul 11 23:20:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 23:35:05 2012] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 23:35:05 2012] Initial guess for spatial extent in simple fitting = 8.15"
[Wed Jul 11 23:35:05 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.888
[Wed Jul 11 23:35:05 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.15"
[Wed Jul 11 23:39:42 2012] fullrun_mos1_xmm0550451701_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jul 11 23:39:42 2012] fullrun_mos1_xmm0550451701_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jul 11 23:39:42 2012] Fit fullrun_mos1_xmm0550451701_pi300-10000_cl_pass1_src3 appears to have run properly
[Wed Jul 11 23:39:42 2012] fullrun_mos1_xmm0550451701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jul 11 23:39:42 2012] fullrun_mos1_xmm0550451701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jul 11 23:39:42 2012] Fit fullrun_mos1_xmm0550451701_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Jul 12 00:10:09 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.164919 pixels away
[Thu Jul 12 00:10:09 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 00:10:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 00:10:09 2012] Assessing source extent using major
[Thu Jul 12 00:10:09 2012] Source does appear to be extended
[Thu Jul 12 00:10:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 00:34:38 2012] XMMSAS src. selection expression = ellipse(22118.869278, 27533.638245, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 12 00:34:38 2012] Writing source region out to fullrun_mos1_xmm0550451701_pi300-10000_pass1_cl_src3_src.reg
[Thu Jul 12 00:34:38 2012] Extracting stamp from image fullrun_mos1_xmm0550451701_pi300-10000_cl_sm2.00.img.gz, (217, 280) - (292, 355)
[Thu Jul 12 00:34:38 2012] XMMSAS bgd. selection expression = annulus(22118.869278, 27533.638245, 1087.500000, 2175.000000, X, Y) && !ellipse(24379.323180, 24574.975200, 1740.273650, 1740.273650, 0.000000, X, Y)
[Thu Jul 12 00:34:38 2012] Writing fullrun_mos1_xmm0550451701_pi300-10000_pass1_cl_src3.gif
[Thu Jul 12 00:38:58 2012] Mean detx,y = (-2088.05, 2696.18) 
[Thu Jul 12 00:38:59 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 00:39:06 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 00:39:07 2012] Setting source spectrum file to fullrun_mos1_xmm0550451701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jul 12 00:39:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550451701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Jul 12 00:50:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 12 00:50:06 2012] rmf not generated due to insufficient counts
[Thu Jul 12 01:11:36 2012] Updating aperture counts using extracted products
[Thu Jul 12 01:11:36 2012] Error reading totcts from fullrun_mos1_xmm0550451701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jul 12 01:11:36 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 01:11:36 2012] Using photon index=1.80, rate=0.0104, arf fullrun_mos1_xmm0550451701_pi300-10000_pass1_cl_src3.arf
[Thu Jul 12 01:11:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 01:11:36 2012] Updating source flux to 1.1e-13
[Thu Jul 12 01:11:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting