[Wed Jul 11 21:21:06 2012] Detection parameters:
  Position = (280.8, 283.0) = 19 37 32.93 -6 13 4.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75812.0 +/- 329.5
  Background counts = 25.7
  Rate = 4 +/- 0.02

[Wed Jul 11 21:21:06 2012] Off-axis axis estimate = 1.70'
[Wed Jul 11 21:38:18 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 21:38:18 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Wed Jul 11 21:38:18 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Wed Jul 11 21:38:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Wed Jul 11 21:59:45 2012] fullrun_mos1_xmm0550451701_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 11 21:59:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550451701_pi300-10000_cl_pass0_src1.csv
[Wed Jul 11 21:59:45 2012] fullrun_mos1_xmm0550451701_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 11 21:59:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550451701_pi300-10000_cl_pass0_src1.csv
[Wed Jul 11 21:59:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550451701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550451701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 21:59:46 2012] fullrun_mos1_xmm0550451701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 11 21:59:46 2012] fullrun_mos1_xmm0550451701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 11 21:59:46 2012] Fit fullrun_mos1_xmm0550451701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jul 11 23:20:18 2012] Spatial fit model total counts = 73711.000000, observed total counts = 73711.000000
[Wed Jul 11 23:20:18 2012] Offset between fit and detection position for source 1 = 0.032510 pixels
[Wed Jul 11 23:20:18 2012] 73675.500000 total counts/ 16346.800000 bgd. counts: snr = 448.389794
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.032510 pixels
  Position = (280.8, 283.0) = 19 37 32.92 -6 13 4.8
  Extent = 7.3 (7.2-7.3)", rotation angle = 0
  Source counts = 57328.7 +/- 271.4
  Background counts = 16346.8
  Rate = 3 +/- 0.02
[Wed Jul 11 23:20:18 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:20:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:20:18 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 23:20:18 2012] Source does appear to be extended
[Wed Jul 11 23:20:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 23:35:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 11 23:35:05 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Wed Jul 11 23:35:05 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Wed Jul 11 23:35:05 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.26"
[Wed Jul 11 23:39:42 2012] fullrun_mos1_xmm0550451701_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 11 23:39:42 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0550451701_pi300-10000_cl_pass1_src1.csv
[Wed Jul 11 23:39:42 2012] fullrun_mos1_xmm0550451701_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 11 23:39:42 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0550451701_pi300-10000_cl_pass1_src1.csv
[Wed Jul 11 23:39:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550451701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550451701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 23:39:42 2012] fullrun_mos1_xmm0550451701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 11 23:39:42 2012] fullrun_mos1_xmm0550451701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 11 23:39:42 2012] Fit fullrun_mos1_xmm0550451701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jul 12 00:10:09 2012] Spatial fit model total counts = 73736.700000, observed total counts = 73711.000000
[Thu Jul 12 00:10:09 2012] Offset between fit and detection position for source 1 = 0.000036 pixels
[Thu Jul 12 00:10:09 2012] 73701.100000 total counts/ 16370.500000 bgd. counts: snr = 448.079954
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000036 pixels
  Position = (280.8, 283.0) = 19 37 32.92 -6 13 4.8
  Extent = 7.3 (7.2-7.3)", rotation angle = 0
  Source counts = 57330.6 +/- 271.5
  Background counts = 16370.5
  Rate = 3 +/- 0.02
[Thu Jul 12 00:10:09 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 00:10:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 00:10:09 2012] Assessing source extent using major axis lower bound
[Thu Jul 12 00:10:09 2012] Source does appear to be extended
[Thu Jul 12 00:10:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 00:34:38 2012] Counts = 57330.600000, rescaling region sizes by 3.000000
[Thu Jul 12 00:34:38 2012] XMMSAS src. selection expression = ellipse(24379.323180, 24574.975200, 1305.205238, 1305.205238, 0.000000, X, Y)
[Thu Jul 12 00:34:38 2012] Writing source region out to fullrun_mos1_xmm0550451701_pi300-10000_pass1_cl_src1_src.reg
[Thu Jul 12 00:34:38 2012] Extracting stamp from image fullrun_mos1_xmm0550451701_pi300-10000_cl_sm2.00.img.gz, (206, 208) - (356, 358)
[Thu Jul 12 00:34:38 2012] XMMSAS bgd. selection expression = annulus(24379.323180, 24574.975200, 6526.026188, 13052.052376, X, Y) && !ellipse(22118.869278, 27533.638245, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 12 00:34:38 2012] Writing fullrun_mos1_xmm0550451701_pi300-10000_pass1_cl_src1.gif
[Thu Jul 12 00:34:45 2012] Mean detx,y = (254.38, -182.52) 
[Thu Jul 12 00:34:47 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 00:38:55 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 00:38:55 2012] Setting source spectrum file to fullrun_mos1_xmm0550451701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 12 00:38:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550451701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jul 12 01:11:36 2012] Updating aperture counts using extracted products
[Thu Jul 12 01:11:36 2012] Error reading totcts from fullrun_mos1_xmm0550451701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 12 01:11:36 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 01:11:36 2012] Using photon index=1.80, rate=3.25, arf fullrun_mos1_xmm0550451701_pi300-10000_pass1_cl_src1.arf
[Thu Jul 12 01:11:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 01:11:36 2012] Updating source flux to 2.9e-11
[Thu Jul 12 01:11:54 2012] Reading fit data from xmm0550451701/analysis//spectral/fullrun_mos1_xmm0550451701_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jul 12 01:11:54 2012] Spectral fit parameter nH value = 9.73169e+20
[Thu Jul 12 01:11:54 2012] Spectral fit parameter PhoIndex value = 2.34128
[Thu Jul 12 01:11:54 2012] Failed to get F(0.3-8.0) from xmm0550451701/analysis//spectral/fullrun_mos1_xmm0550451701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jul 12 01:11:54 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 01:11:54 2012] Using Nh = 9.7e+20, photon index=2.34, rate=3.25, arf fullrun_mos1_xmm0550451701_pi300-10000_pass1_cl_src1.arf
[Thu Jul 12 01:11:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 01:11:54 2012] Updating source flux to 2.5e-11