[Wed Jul 25 21:32:35 2012] Detection parameters:
  Position = (283.3, 411.9) = 17 37 29.03 -28 58 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 184.6 +/- 20.7
  Background counts = 59.3
  Rate = 0.01 +/- 0.001

[Wed Jul 25 21:32:36 2012] Off-axis axis estimate = 8.30'
[Wed Jul 25 21:34:50 2012] Using EEF radius (= 10.58 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 21:34:50 2012] Initial guess for spatial extent in simple fitting = 10.58"
[Wed Jul 25 21:34:50 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.047
[Wed Jul 25 21:34:50 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.58"
[Wed Jul 25 22:24:17 2012] fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_src9.ximg exists
[Wed Jul 25 22:24:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_src9.csv
[Wed Jul 25 22:24:17 2012] fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Jul 25 22:24:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_src9.csv
[Wed Jul 25 22:24:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 22:24:18 2012] fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Jul 25 22:24:18 2012] fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Jul 25 22:24:18 2012] Fit fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Jul 25 23:10:18 2012] Spatial fit model total counts = 1017.560000, observed total counts = 1018.000000
[Wed Jul 25 23:10:18 2012] Offset between fit and detection position for source 9 = 0.898156 pixels
[Wed Jul 25 23:10:18 2012] 601.647200 total counts/ 517.100000 bgd. counts: snr = 3.718022
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.898156 pixels
  Position = (283.2, 412.8) = 17 37 29.07 -28 58 19.4
  Extent = 5.4 (3.9-7.8)", rotation angle = 0
  Source counts = 84.5 +/- 24.5
  Background counts = 517.1
  Rate = 0.006 +/- 0.002
[Wed Jul 25 23:10:18 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 23:10:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 23:10:18 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 23:10:18 2012] Source does appear to be extended
[Wed Jul 25 23:10:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 23:10:18 2012] Source is confused with source 8
[Wed Jul 25 23:10:18 2012] Source is confused with source 10
[Wed Jul 25 23:10:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 25 23:10:27 2012] Initial guess for spatial extent in simple fitting = 5.42"
[Wed Jul 25 23:10:27 2012] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.312
[Wed Jul 25 23:10:27 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 5.42"
[Wed Jul 25 23:56:40 2012] fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_src9.ximg exists
[Wed Jul 25 23:56:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_src9.csv
[Wed Jul 25 23:56:40 2012] fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Jul 25 23:56:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_src9.csv
[Wed Jul 25 23:56:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 23:56:41 2012] fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Jul 25 23:56:41 2012] fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Jul 25 23:56:41 2012] Fit fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Jul 26 01:56:46 2012] Warning, spatial fit 9 centroid is now closest to src. 8
[Thu Jul 26 01:56:46 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 01:56:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 01:56:46 2012] Assessing source extent using major axis lower bound
[Thu Jul 26 01:56:46 2012] Source does appear to be extended
[Thu Jul 26 01:56:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 01:56:54 2012] XMMSAS src. selection expression = ellipse(24586.331940, 35867.175920, 325.299609, 325.299609, 0.000000, X, Y)
[Thu Jul 26 01:56:54 2012] Writing source region out to fullrun_pn_xmm0550451501_pi300-10000_pass1_cl_src9_src.reg
[Thu Jul 26 01:56:54 2012] Extracting stamp from image fullrun_pn_xmm0550451501_pi300-10000_cl_sm2.00.img.gz, (264, 394) - (302, 432)
[Thu Jul 26 01:56:54 2012] XMMSAS bgd. selection expression = annulus(24586.331940, 35867.175920, 542.166016, 1084.332031, X, Y) && !ellipse(24579.551758, 37799.330261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24591.297000, 36902.655400, 821.688024, 821.688024, 0.000000, X, Y) && !ellipse(24582.248240, 36052.372600, 597.542417, 597.542417, 0.000000, X, Y) && !ellipse(24592.407410, 35359.894653, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 26 01:56:54 2012] Writing fullrun_pn_xmm0550451501_pi300-10000_pass1_cl_src9.gif
[Thu Jul 26 02:04:17 2012] Mean detx,y = (148.84, 11423.81) 
[Thu Jul 26 02:04:19 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 02:04:32 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 02:04:32 2012] Setting source spectrum file to fullrun_pn_xmm0550451501_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jul 26 02:04:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550451501_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Jul 26 02:44:57 2012] Not generating rmf since there are only 84 counts
[Thu Jul 26 02:44:57 2012] rmf not generated due to insufficient counts
[Thu Jul 26 03:46:33 2012] Updating aperture counts using extracted products
[Thu Jul 26 03:46:33 2012] Error reading totcts from fullrun_pn_xmm0550451501_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jul 26 03:46:33 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 03:46:33 2012] Using photon index=1.80, rate=0.00578, arf fullrun_pn_xmm0550451501_pi300-10000_pass1_cl_src9.arf
[Thu Jul 26 03:46:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 03:46:33 2012] Updating source flux to 3.7e-14
[Thu Jul 26 03:47:12 2012] Flag c found in src. 9 procflags, skipping spectral fitting
[Thu Jul 26 03:47:12 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting