[Wed Jul 25 21:32:35 2012] Detection parameters:
  Position = (284.9, 278.9) = 17 37 28.50 -29 8 2.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99012.8 +/- 371.5
  Background counts = 91.9
  Rate = 7 +/- 0.03

[Wed Jul 25 21:32:36 2012] Off-axis axis estimate = 1.72'
[Wed Jul 25 21:34:50 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 21:34:50 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Jul 25 21:34:50 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Wed Jul 25 21:34:50 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.29"
[Wed Jul 25 22:24:17 2012] fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jul 25 22:24:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_src3.csv
[Wed Jul 25 22:24:17 2012] fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jul 25 22:24:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_src3.csv
[Wed Jul 25 22:24:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 22:24:18 2012] fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jul 25 22:24:18 2012] fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jul 25 22:24:18 2012] Fit fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Jul 25 23:10:18 2012] Spatial fit model total counts = 81915.500000, observed total counts = 81309.000000
[Wed Jul 25 23:10:18 2012] Offset between fit and detection position for source 3 = 0.122112 pixels
[Wed Jul 25 23:10:18 2012] 82403.300000 total counts/ 19195.700000 bgd. counts: snr = 456.212650
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.122112 pixels
  Position = (284.9, 278.8) = 17 37 28.51 -29 8 2.6
  Extent = 5.8 (5.7-5.8)", rotation angle = 0
  Source counts = 63207.6 +/- 287.1
  Background counts = 19195.7
  Rate = 4 +/- 0.02
[Wed Jul 25 23:10:18 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 23:10:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 23:10:18 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 23:10:18 2012] Source does appear to be extended
[Wed Jul 25 23:10:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 23:10:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 25 23:10:27 2012] Initial guess for spatial extent in simple fitting = 5.78"
[Wed Jul 25 23:10:27 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.197
[Wed Jul 25 23:10:27 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.78"
[Wed Jul 25 23:56:40 2012] fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jul 25 23:56:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_src3.csv
[Wed Jul 25 23:56:40 2012] fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jul 25 23:56:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_src3.csv
[Wed Jul 25 23:56:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 23:56:40 2012] fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jul 25 23:56:40 2012] fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jul 25 23:56:40 2012] Fit fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Jul 26 01:56:46 2012] Spatial fit model total counts = 81884.800000, observed total counts = 81309.000000
[Thu Jul 26 01:56:46 2012] Offset between fit and detection position for source 3 = 0.000130 pixels
[Thu Jul 26 01:56:46 2012] 82371.400000 total counts/ 19174.700000 bgd. counts: snr = 456.383686
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000130 pixels
  Position = (284.9, 278.8) = 17 37 28.51 -29 8 2.6
  Extent = 5.8 (5.7-5.8)", rotation angle = 0
  Source counts = 63196.7 +/- 287.0
  Background counts = 19174.7
  Rate = 4 +/- 0.02
[Thu Jul 26 01:56:46 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 01:56:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 01:56:46 2012] Assessing source extent using major axis lower bound
[Thu Jul 26 01:56:46 2012] Source does appear to be extended
[Thu Jul 26 01:56:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 01:56:54 2012] Counts = 63196.700000, rescaling region sizes by 3.000000
[Thu Jul 26 01:56:54 2012] XMMSAS src. selection expression = ellipse(24735.447200, 24203.187000, 1040.281230, 1040.281230, 0.000000, X, Y)
[Thu Jul 26 01:56:54 2012] Writing source region out to fullrun_pn_xmm0550451501_pi300-10000_pass1_cl_src3_src.reg
[Thu Jul 26 01:56:54 2012] Extracting stamp from image fullrun_pn_xmm0550451501_pi300-10000_cl_sm2.00.img.gz, (225, 219) - (345, 339)
[Thu Jul 26 01:56:54 2012] XMMSAS bgd. selection expression = annulus(24735.447200, 24203.187000, 5201.406150, 10402.812299, X, Y) && !ellipse(15533.143448, 25333.728760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24592.407410, 35359.894653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24658.530914, 33871.169281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24648.261261, 33016.982635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24629.119800, 32406.035000, 471.012814, 471.012814, 0.000000, X, Y) && !ellipse(24644.831150, 32031.937717, 1469.736042, 358.484971, 86.973039, X, Y) && !ellipse(24651.265000, 31079.312200, 690.475220, 690.475220, 0.000000, X, Y) && !ellipse(24663.810480, 30843.975400, 627.044818, 627.044818, 0.000000, X, Y) && !ellipse(24654.613760, 30032.478400, 912.720026, 912.720026, 0.000000, X, Y) && !ellipse(24677.081940, 29183.768600, 809.280023, 809.280023, 0.000000, X, Y) && !ellipse(24667.108339, 28890.179113, 1191.808034, 420.860859, 86.395337, X, Y) && !ellipse(24686.827400, 28305.475600, 1191.808034, 407.618412, 87.955640, X, Y) && !ellipse(24693.952600, 26985.854400, 493.794414, 493.794414, 0.000000, X, Y) && !ellipse(25461.018829, 22929.305023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24509.674042, 22934.102661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23865.354187, 22862.459351, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 26 01:56:54 2012] Writing fullrun_pn_xmm0550451501_pi300-10000_pass1_cl_src3.gif
[Thu Jul 26 01:58:22 2012] Mean detx,y = (141.26, -214.46) 
[Thu Jul 26 01:58:27 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 02:01:32 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 02:01:33 2012] Setting source spectrum file to fullrun_pn_xmm0550451501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jul 26 02:01:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550451501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Jul 26 03:46:33 2012] Updating aperture counts using extracted products
[Thu Jul 26 03:46:33 2012] Error reading totcts from fullrun_pn_xmm0550451501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jul 26 03:46:33 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 03:46:33 2012] Using photon index=1.80, rate=4.32, arf fullrun_pn_xmm0550451501_pi300-10000_pass1_cl_src3.arf
[Thu Jul 26 03:46:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 03:46:33 2012] Updating source flux to 1e-11