[Wed Jul 25 21:32:35 2012] Detection parameters:
  Position = (283.2, 407.0) = 17 37 29.05 -28 58 45.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 262.6 +/- 23.4
  Background counts = 60.1
  Rate = 0.02 +/- 0.001

[Wed Jul 25 21:32:36 2012] Off-axis axis estimate = 7.95'
[Wed Jul 25 21:34:50 2012] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 21:34:50 2012] Initial guess for spatial extent in simple fitting = 10.40"
[Wed Jul 25 21:34:50 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.077
[Wed Jul 25 21:34:50 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 10.40"
[Wed Jul 25 22:24:17 2012] fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_src10.ximg exists
[Wed Jul 25 22:24:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_src10.csv
[Wed Jul 25 22:24:17 2012] fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed Jul 25 22:24:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_src10.csv
[Wed Jul 25 22:24:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 22:24:18 2012] fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed Jul 25 22:24:18 2012] fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Jul 25 22:24:18 2012] Fit fullrun_pn_xmm0550451501_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Jul 25 23:10:18 2012] Warning, spatial fit 10 centroid is now closest to src. 11
[Wed Jul 25 23:10:18 2012] Source 10 is offset by -9.069386 and -1.305165 pixels which is larger than
2 X fitted extent = 1.162276 x 1.162276, not incorporating fit results
[Wed Jul 25 23:10:18 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 23:10:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 23:10:18 2012] Assessing source extent using major
[Wed Jul 25 23:10:18 2012] Source does appear to be extended
[Wed Jul 25 23:10:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 23:10:18 2012] Source is confused with source 9
[Wed Jul 25 23:10:27 2012] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 23:10:27 2012] Initial guess for spatial extent in simple fitting = 10.40"
[Wed Jul 25 23:10:27 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.077
[Wed Jul 25 23:10:27 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 10.40"
[Wed Jul 25 23:56:40 2012] fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_src10.ximg exists
[Wed Jul 25 23:56:40 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_src10.csv
[Wed Jul 25 23:56:40 2012] fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed Jul 25 23:56:40 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_src10.csv
[Wed Jul 25 23:56:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 23:56:41 2012] fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed Jul 25 23:56:41 2012] fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Jul 25 23:56:41 2012] Fit fullrun_pn_xmm0550451501_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Thu Jul 26 01:56:46 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 10.368067 pixels away
[Thu Jul 26 01:56:46 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 14.104582 pixels away
[Thu Jul 26 01:56:46 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 12.015137 pixels away
[Thu Jul 26 01:56:46 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 01:56:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 01:56:46 2012] Assessing source extent using major
[Thu Jul 26 01:56:46 2012] Source does appear to be extended
[Thu Jul 26 01:56:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 01:56:54 2012] XMMSAS src. selection expression = ellipse(24592.407410, 35359.894653, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 26 01:56:54 2012] Writing source region out to fullrun_pn_xmm0550451501_pi300-10000_pass1_cl_src10_src.reg
[Thu Jul 26 01:56:54 2012] Extracting stamp from image fullrun_pn_xmm0550451501_pi300-10000_cl_sm2.00.img.gz, (246, 369) - (321, 444)
[Thu Jul 26 01:56:54 2012] XMMSAS bgd. selection expression = annulus(24592.407410, 35359.894653, 1087.500000, 2175.000000, X, Y) && !ellipse(24579.551758, 37799.330261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24591.297000, 36902.655400, 821.688024, 821.688024, 0.000000, X, Y) && !ellipse(24582.248240, 36052.372600, 597.542417, 597.542417, 0.000000, X, Y) && !ellipse(24586.331940, 35867.175920, 433.732812, 433.732812, 0.000000, X, Y) && !ellipse(24658.530914, 33871.169281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24648.261261, 33016.982635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24644.831150, 32031.937717, 1469.736042, 358.484971, 86.973039, X, Y) && !ellipse(24535.141400, 38075.776800, 668.645619, 668.645619, 0.000000, X, Y)
[Thu Jul 26 01:56:54 2012] Writing fullrun_pn_xmm0550451501_pi300-10000_pass1_cl_src10.gif
[Thu Jul 26 02:04:42 2012] Mean detx,y = (152.09, 10929.87) 
[Thu Jul 26 02:04:44 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 02:05:07 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 02:05:08 2012] Setting source spectrum file to fullrun_pn_xmm0550451501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Jul 26 02:05:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550451501_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Jul 26 02:45:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 26 02:45:06 2012] rmf not generated due to insufficient counts
[Thu Jul 26 03:46:33 2012] Updating aperture counts using extracted products
[Thu Jul 26 03:46:33 2012] Error reading totcts from fullrun_pn_xmm0550451501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Jul 26 03:46:33 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 03:46:33 2012] Using photon index=1.80, rate=0.0164, arf fullrun_pn_xmm0550451501_pi300-10000_pass1_cl_src10.arf
[Thu Jul 26 03:46:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 03:46:33 2012] Updating source flux to 8e-14
[Thu Jul 26 03:47:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting