[Wed Jul 25 21:33:08 2012] Detection parameters:
  Position = (290.4, 279.0) = 17 37 26.68 -29 8 1.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 550.0 +/- 48.8
  Background counts = 22.4
  Rate = 0.03 +/- 0.003

[Wed Jul 25 21:33:08 2012] Off-axis axis estimate = 1.52'
[Wed Jul 25 22:48:16 2012] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 22:48:16 2012] Initial guess for spatial extent in simple fitting = 7.19"
[Wed Jul 25 22:48:16 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.863
[Wed Jul 25 22:48:16 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.19"
[Wed Jul 25 23:10:12 2012] fullrun_mos2_xmm0550451501_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jul 25 23:10:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451501_pi300-10000_cl_pass0_src3.csv
[Wed Jul 25 23:10:12 2012] fullrun_mos2_xmm0550451501_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jul 25 23:10:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451501_pi300-10000_cl_pass0_src3.csv
[Wed Jul 25 23:10:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550451501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550451501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 23:10:12 2012] fullrun_mos2_xmm0550451501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jul 25 23:10:12 2012] fullrun_mos2_xmm0550451501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jul 25 23:10:12 2012] Fit fullrun_mos2_xmm0550451501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Jul 25 23:10:22 2012] Spatial fit model total counts = 32102.900000, observed total counts = 31663.000000
[Wed Jul 25 23:10:22 2012] Offset between fit and detection position for source 4 = 7.620784 pixels
[Wed Jul 25 23:10:22 2012] 7168.240000 total counts/ 6116.370000 bgd. counts: snr = 13.449780
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 7.620784 pixels
  Position = (295.8, 284.3) = 17 37 24.87 -29 7 38.3
  Extent = 14.4 (14.3-28.8)", rotation angle = 0
  Source counts = 1051.9 +/- 84.7
  Background counts = 6116.4
  Rate = 0.06 +/- 0.005
[Wed Jul 25 23:10:22 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 23:10:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 23:10:22 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 23:10:22 2012] Source does appear to be extended
[Wed Jul 25 23:10:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 01:31:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 26 01:31:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 26 01:31:09 2012] Initial guess for spatial extent in simple fitting = 14.38"
[Thu Jul 26 01:31:09 2012] source mask rpix=3.3, npix_max = 57, mask sum = 56, frac = 0.967
[Thu Jul 26 01:31:09 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 14.38"
[Thu Jul 26 01:56:39 2012] fullrun_mos2_xmm0550451501_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jul 26 01:56:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451501_pi300-10000_cl_pass1_src3.csv
[Thu Jul 26 01:56:39 2012] fullrun_mos2_xmm0550451501_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jul 26 01:56:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451501_pi300-10000_cl_pass1_src3.csv
[Thu Jul 26 01:56:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550451501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550451501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 01:56:40 2012] fullrun_mos2_xmm0550451501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jul 26 01:56:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Jul 26 01:56:40 2012] fullrun_mos2_xmm0550451501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jul 26 01:56:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Jul 26 01:56:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550451501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550451501_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 01:56:48 2012] Warning, spatial fit 3 centroid is now closest to src. 1
[Thu Jul 26 01:56:48 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 01:56:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 01:56:48 2012] Assessing source extent using major axis lower bound
[Thu Jul 26 01:56:48 2012] Source does appear to be extended
[Thu Jul 26 01:56:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 03:28:02 2012] Counts = 1051.870000, rescaling region sizes by 2.000000
[Thu Jul 26 03:28:02 2012] XMMSAS src. selection expression = ellipse(25690.244000, 24689.062000, 1725.684050, 1725.684050, 0.000000, X, Y)
[Thu Jul 26 03:28:02 2012] Writing source region out to fullrun_mos2_xmm0550451501_pi300-10000_pass1_cl_src4_src.reg
[Thu Jul 26 03:28:02 2012] Extracting stamp from image fullrun_mos2_xmm0550451501_pi300-10000_cl_sm2.00.img.gz, (197, 185) - (395, 384)
[Thu Jul 26 03:28:02 2012] XMMSAS bgd. selection expression = annulus(25690.244000, 24689.062000, 5752.280166, 11504.560331, X, Y) && !ellipse(24733.641693, 24219.043915, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(15531.715042, 25338.313995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23748.304565, 24400.690399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23729.161804, 23608.777466, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 26 03:28:02 2012] Writing fullrun_mos2_xmm0550451501_pi300-10000_pass1_cl_src4.gif
[Thu Jul 26 03:36:51 2012] Mean detx,y = (95.10, 24.93) 
[Thu Jul 26 03:36:53 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 03:40:50 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 03:40:50 2012] Setting source spectrum file to fullrun_mos2_xmm0550451501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jul 26 03:40:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550451501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Jul 26 03:46:33 2012] Updating aperture counts using extracted products
[Thu Jul 26 03:46:33 2012] Error reading totcts from fullrun_mos2_xmm0550451501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jul 26 03:46:33 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 03:46:33 2012] Using photon index=1.80, rate=0.06, arf fullrun_mos2_xmm0550451501_pi300-10000_pass1_cl_src4.arf
[Thu Jul 26 03:46:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 03:46:33 2012] Updating source flux to 5.6e-13
[Thu Jul 26 03:47:12 2012] Reading fit data from xmm0550451501/analysis//spectral/fullrun_mos2_xmm0550451501_pi300-10000_pass1_cl_src4_pl.csv
[Thu Jul 26 03:47:12 2012] Spectral fit parameter nH value = 1.58027e+22
[Thu Jul 26 03:47:12 2012] Spectral fit parameter PhoIndex value = 1.44458
[Thu Jul 26 03:47:12 2012] Failed to get F(0.3-8.0) from xmm0550451501/analysis//spectral/fullrun_mos2_xmm0550451501_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Thu Jul 26 03:47:12 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 03:47:12 2012] Using Nh = 1.6e+22, photon index=1.44, rate=0.06, arf fullrun_mos2_xmm0550451501_pi300-10000_pass1_cl_src4.arf
[Thu Jul 26 03:47:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 03:47:12 2012] Updating source flux to 1.2e-12