[Wed Jul 25 21:32:51 2012] Detection parameters:
  Position = (463.7, 244.9) = 17 36 29.11 -29 10 29.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 845.6 +/- 34.4
  Background counts = 12.4
  Rate = 0.05 +/- 0.002

[Wed Jul 25 21:32:52 2012] Off-axis axis estimate = 12.60'
[Wed Jul 25 22:24:18 2012] Using EEF radius (= 12.73 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 22:24:18 2012] Initial guess for spatial extent in simple fitting = 12.73"
[Wed Jul 25 22:24:18 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.895
[Wed Jul 25 22:24:18 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.73"
[Wed Jul 25 22:48:16 2012] fullrun_mos1_xmm0550451501_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jul 25 22:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550451501_pi300-10000_cl_pass0_src3.csv
[Wed Jul 25 22:48:16 2012] fullrun_mos1_xmm0550451501_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jul 25 22:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550451501_pi300-10000_cl_pass0_src3.csv
[Wed Jul 25 22:48:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550451501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550451501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 22:48:16 2012] fullrun_mos1_xmm0550451501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jul 25 22:48:16 2012] fullrun_mos1_xmm0550451501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jul 25 22:48:16 2012] Fit fullrun_mos1_xmm0550451501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Jul 25 23:10:19 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 16.834455 pixels away
[Wed Jul 25 23:10:19 2012] Warning, spatial fit 3 centroid is now closest to src. 5
[Wed Jul 25 23:10:19 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 23:10:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 23:10:19 2012] Assessing source extent using major
[Wed Jul 25 23:10:19 2012] Source does appear to be extended
[Wed Jul 25 23:10:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 23:56:41 2012] Using EEF radius (= 12.73 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 23:56:41 2012] Initial guess for spatial extent in simple fitting = 12.73"
[Wed Jul 25 23:56:41 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.895
[Wed Jul 25 23:56:41 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 12.73"
[Thu Jul 26 01:31:08 2012] fullrun_mos1_xmm0550451501_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jul 26 01:31:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550451501_pi300-10000_cl_pass1_src3.csv
[Thu Jul 26 01:31:08 2012] fullrun_mos1_xmm0550451501_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jul 26 01:31:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550451501_pi300-10000_cl_pass1_src3.csv
[Thu Jul 26 01:31:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550451501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550451501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 01:31:08 2012] fullrun_mos1_xmm0550451501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jul 26 01:31:08 2012] fullrun_mos1_xmm0550451501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jul 26 01:31:08 2012] Fit fullrun_mos1_xmm0550451501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Jul 26 01:56:47 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 16.834455 pixels away
[Thu Jul 26 01:56:47 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 01:56:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 01:56:47 2012] Assessing source extent using major
[Thu Jul 26 01:56:47 2012] Source does appear to be extended
[Thu Jul 26 01:56:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 03:19:05 2012] XMMSAS src. selection expression = ellipse(40296.839325, 21260.220856, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 26 03:19:05 2012] Writing source region out to fullrun_mos1_xmm0550451501_pi300-10000_pass1_cl_src2_src.reg
[Thu Jul 26 03:19:05 2012] Extracting stamp from image fullrun_mos1_xmm0550451501_pi300-10000_cl_sm2.00.img.gz, (426, 207) - (501, 282)
[Thu Jul 26 03:19:05 2012] XMMSAS bgd. selection expression = annulus(40296.839325, 21260.220856, 1087.500000, 2175.000000, X, Y)
[Thu Jul 26 03:19:05 2012] Writing fullrun_mos1_xmm0550451501_pi300-10000_pass1_cl_src2.gif
[Thu Jul 26 03:23:53 2012] Mean detx,y = (3368.31, -15689.49) 
[Thu Jul 26 03:23:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 03:24:05 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 03:24:05 2012] Setting source spectrum file to fullrun_mos1_xmm0550451501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jul 26 03:24:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550451501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jul 26 03:27:52 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 26 03:27:52 2012] rmf not generated due to insufficient counts
[Thu Jul 26 03:46:33 2012] Updating aperture counts using extracted products
[Thu Jul 26 03:46:33 2012] Error reading totcts from fullrun_mos1_xmm0550451501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jul 26 03:46:33 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 03:46:33 2012] Using photon index=1.80, rate=0.0482, arf fullrun_mos1_xmm0550451501_pi300-10000_pass1_cl_src2.arf
[Thu Jul 26 03:46:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 03:46:33 2012] Updating source flux to 1.6e-12
[Thu Jul 26 03:46:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting