[Fri Jun 15 10:09:35 2012] Detection parameters:
  Position = (276.7, 367.1) = 16 38 34.68 -20 48 51.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.6 +/- 11.5
  Background counts = 16.1
  Rate = 0.01 +/- 0.002

[Fri Jun 15 10:09:35 2012] Off-axis axis estimate = 5.22'
[Fri Jun 15 10:11:19 2012] Using EEF radius (= 9.04 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 10:11:19 2012] Initial guess for spatial extent in simple fitting = 9.04"
[Fri Jun 15 10:11:19 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.940
[Fri Jun 15 10:11:19 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 9.04"
[Fri Jun 15 11:18:18 2012] fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_src13.ximg exists
[Fri Jun 15 11:18:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_src13.csv
[Fri Jun 15 11:18:18 2012] fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Jun 15 11:18:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_src13.csv
[Fri Jun 15 11:18:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 11:18:19 2012] fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Jun 15 11:18:19 2012] fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jun 15 11:18:19 2012] Fit fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Jun 15 11:47:25 2012] Spatial fit model total counts = 279.989000, observed total counts = 280.000000
[Fri Jun 15 11:47:25 2012] Offset between fit and detection position for source 13 = 0.942391 pixels
[Fri Jun 15 11:47:25 2012] 272.763000 total counts/ 147.038000 bgd. counts: snr = 10.368283
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.942391 pixels
  Position = (276.7, 366.2) = 16 38 34.68 -20 48 56.9
  Extent = 12.1 (9.3-17.1)", rotation angle = 0
  Source counts = 125.7 +/- 16.5
  Background counts = 147.0
  Rate = 0.01 +/- 0.002
[Fri Jun 15 11:47:25 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 11:47:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 11:47:25 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 11:47:25 2012] Source does appear to be extended
[Fri Jun 15 11:47:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 11:47:25 2012] Source is confused with source 15
[Fri Jun 15 11:47:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 11:47:34 2012] Initial guess for spatial extent in simple fitting = 12.07"
[Fri Jun 15 11:47:34 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.979
[Fri Jun 15 11:47:34 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 12.07"
[Fri Jun 15 12:58:58 2012] fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_src13.ximg exists
[Fri Jun 15 12:58:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_src13.csv
[Fri Jun 15 12:58:58 2012] fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Jun 15 12:58:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_src13.csv
[Fri Jun 15 12:58:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 12:58:58 2012] fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Jun 15 12:58:58 2012] fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Jun 15 12:58:58 2012] Fit fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Jun 15 13:09:00 2012] Warning, spatial fit 13 centroid is now closest to src. 18
[Fri Jun 15 13:09:00 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 13:09:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 13:09:00 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 13:09:00 2012] Source does appear to be extended
[Fri Jun 15 13:09:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 13:09:08 2012] XMMSAS src. selection expression = ellipse(24027.321200, 31806.662800, 724.470021, 724.470021, 0.000000, X, Y)
[Fri Jun 15 13:09:08 2012] Writing source region out to fullrun_pn_xmm0550451301_pi300-10000_pass1_cl_src13_src.reg
[Fri Jun 15 13:09:08 2012] Extracting stamp from image fullrun_pn_xmm0550451301_pi300-10000_cl_sm2.00.img.gz, (235, 325) - (318, 408)
[Fri Jun 15 13:09:08 2012] XMMSAS bgd. selection expression = annulus(24027.321200, 31806.662800, 1207.450035, 2414.900069, X, Y) && !ellipse(23498.099800, 35687.132000, 1701.184049, 495.939214, 77.730800, X, Y) && !ellipse(23598.871372, 34706.990051, 1620.256047, 348.864945, 79.918640, X, Y) && !ellipse(23685.929400, 34430.354000, 1172.344034, 1172.344034, 0.000000, X, Y) && !ellipse(23781.740800, 33528.396600, 1043.752030, 1043.752030, 0.000000, X, Y) && !ellipse(23777.876800, 33276.270000, 1016.768029, 1016.768029, 0.000000, X, Y) && !ellipse(24155.603180, 30692.552600, 1506.096043, 606.924017, 85.855693, X, Y) && !ellipse(24271.823600, 29876.927560, 653.813619, 653.813619, 0.000000, X, Y)
[Fri Jun 15 13:09:08 2012] Writing fullrun_pn_xmm0550451301_pi300-10000_pass1_cl_src13.gif
[Fri Jun 15 13:22:50 2012] Mean detx,y = (6.27, 7565.71) 
[Fri Jun 15 13:22:52 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 13:23:10 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 13:23:10 2012] Setting source spectrum file to fullrun_pn_xmm0550451301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Jun 15 13:23:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550451301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri Jun 15 14:30:48 2012] Updating aperture counts using extracted products
[Fri Jun 15 14:30:48 2012] Error reading totcts from fullrun_pn_xmm0550451301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Jun 15 14:30:48 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 14:30:48 2012] Using photon index=1.80, rate=0.0139, arf fullrun_pn_xmm0550451301_pi300-10000_pass1_cl_src13.arf
[Fri Jun 15 14:30:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 14:30:48 2012] Updating source flux to 5.1e-14
[Fri Jun 15 14:31:16 2012] Flag c found in src. 13 procflags, skipping spectral fitting