[Fri Jun 15 10:09:35 2012] Detection parameters:
  Position = (274.6, 386.0) = 16 38 35.34 -20 47 32.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.8 +/- 9.5
  Background counts = 15.7
  Rate = 0.008 +/- 0.002

[Fri Jun 15 10:09:35 2012] Off-axis axis estimate = 6.58'
[Fri Jun 15 10:11:19 2012] Using EEF radius (= 9.72 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 10:11:19 2012] Initial guess for spatial extent in simple fitting = 9.72"
[Fri Jun 15 10:11:19 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.004
[Fri Jun 15 10:11:19 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 9.72"
[Fri Jun 15 11:18:18 2012] fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_src11.ximg exists
[Fri Jun 15 11:18:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_src11.csv
[Fri Jun 15 11:18:18 2012] fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Jun 15 11:18:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_src11.csv
[Fri Jun 15 11:18:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 11:18:19 2012] fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Jun 15 11:18:19 2012] fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Jun 15 11:18:19 2012] Fit fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Jun 15 11:47:25 2012] Spatial fit model total counts = 249.414000, observed total counts = 250.000000
[Fri Jun 15 11:47:25 2012] Offset between fit and detection position for source 11 = 0.683269 pixels
[Fri Jun 15 11:47:25 2012] 210.873600 total counts/ 116.319000 bgd. counts: snr = 8.767128
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.683269 pixels
  Position = (273.9, 385.9) = 16 38 35.56 -20 47 30.8
  Extent = 13.0 (8.1-19.4)", rotation angle = 0
  Source counts = 94.6 +/- 14.5
  Background counts = 116.3
  Rate = 0.01 +/- 0.002
[Fri Jun 15 11:47:25 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 11:47:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 11:47:25 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 11:47:25 2012] Source does appear to be extended
[Fri Jun 15 11:47:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 11:47:25 2012] Source is confused with source 12
[Fri Jun 15 11:47:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 11:47:34 2012] Initial guess for spatial extent in simple fitting = 13.05"
[Fri Jun 15 11:47:34 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.000
[Fri Jun 15 11:47:34 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 13.05"
[Fri Jun 15 12:58:58 2012] fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_src11.ximg exists
[Fri Jun 15 12:58:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_src11.csv
[Fri Jun 15 12:58:58 2012] fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Jun 15 12:58:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_src11.csv
[Fri Jun 15 12:58:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 12:58:58 2012] fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Jun 15 12:58:58 2012] fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Jun 15 12:58:58 2012] Fit fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Jun 15 13:09:00 2012] Warning, spatial fit 11 centroid is now closest to src. 7
[Fri Jun 15 13:09:00 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 13:09:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 13:09:00 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 13:09:00 2012] Source does appear to be extended
[Fri Jun 15 13:09:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 13:09:08 2012] XMMSAS src. selection expression = ellipse(23781.740800, 33528.396600, 782.814023, 782.814023, 0.000000, X, Y)
[Fri Jun 15 13:09:08 2012] Writing source region out to fullrun_pn_xmm0550451301_pi300-10000_pass1_cl_src11_src.reg
[Fri Jun 15 13:09:08 2012] Extracting stamp from image fullrun_pn_xmm0550451301_pi300-10000_cl_sm2.00.img.gz, (229, 341) - (319, 431)
[Fri Jun 15 13:09:08 2012] XMMSAS bgd. selection expression = annulus(23781.740800, 33528.396600, 1304.690038, 2609.380075, X, Y) && !ellipse(23353.222800, 36739.929000, 1759.360051, 538.704016, 90.000000, X, Y) && !ellipse(23236.021400, 37296.634000, 1469.520042, 486.088814, 258.212000, X, Y) && !ellipse(23498.099800, 35687.132000, 1701.184049, 495.939214, 77.730800, X, Y) && !ellipse(23598.871372, 34706.990051, 1620.256047, 348.864945, 79.918640, X, Y) && !ellipse(23685.929400, 34430.354000, 1172.344034, 1172.344034, 0.000000, X, Y) && !ellipse(23777.876800, 33276.270000, 1016.768029, 1016.768029, 0.000000, X, Y) && !ellipse(24027.321200, 31806.662800, 965.960028, 965.960028, 0.000000, X, Y) && !ellipse(24155.603180, 30692.552600, 1506.096043, 606.924017, 85.855693, X, Y)
[Fri Jun 15 13:09:08 2012] Writing fullrun_pn_xmm0550451301_pi300-10000_pass1_cl_src11.gif
[Fri Jun 15 13:21:35 2012] Mean detx,y = (27.19, 9310.35) 
[Fri Jun 15 13:21:37 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 13:22:10 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 13:22:10 2012] Setting source spectrum file to fullrun_pn_xmm0550451301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Jun 15 13:22:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550451301_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri Jun 15 14:08:19 2012] Not generating rmf since there are only 94 counts
[Fri Jun 15 14:08:19 2012] rmf not generated due to insufficient counts
[Fri Jun 15 14:30:48 2012] Updating aperture counts using extracted products
[Fri Jun 15 14:30:48 2012] Error reading totcts from fullrun_pn_xmm0550451301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Jun 15 14:30:48 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 14:30:48 2012] Using photon index=1.80, rate=0.0105, arf fullrun_pn_xmm0550451301_pi300-10000_pass1_cl_src11.arf
[Fri Jun 15 14:30:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 14:30:48 2012] Updating source flux to 4.2e-14
[Fri Jun 15 14:31:16 2012] Flag c found in src. 11 procflags, skipping spectral fitting
[Fri Jun 15 14:31:16 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting