[Fri Jun 15 10:09:35 2012] Detection parameters:
  Position = (288.9, 276.9) = 16 38 30.90 -20 55 25.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28315.8 +/- 199.5
  Background counts = 17.4
  Rate = 4 +/- 0.03

[Fri Jun 15 10:09:35 2012] Off-axis axis estimate = 1.71'
[Fri Jun 15 10:11:19 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 10:11:19 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Fri Jun 15 10:11:19 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Fri Jun 15 10:11:19 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Fri Jun 15 11:18:18 2012] fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 15 11:18:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 11:18:18 2012] fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 15 11:18:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 11:18:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 11:18:18 2012] fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 15 11:18:18 2012] fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 15 11:18:18 2012] Fit fullrun_pn_xmm0550451301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 15 11:47:25 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.097449 pixels away
[Fri Jun 15 11:47:25 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 11:47:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 11:47:25 2012] Assessing source extent using major
[Fri Jun 15 11:47:25 2012] Source does appear to be extended
[Fri Jun 15 11:47:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 11:47:34 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 11:47:34 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Fri Jun 15 11:47:34 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Fri Jun 15 11:47:34 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.28"
[Fri Jun 15 12:58:57 2012] fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 15 12:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 12:58:57 2012] fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 15 12:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 12:58:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 12:58:58 2012] fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 15 12:58:58 2012] fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 15 12:58:58 2012] Fit fullrun_pn_xmm0550451301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 15 13:09:00 2012] Spatial fit model total counts = 25408.800000, observed total counts = 25361.000000
[Fri Jun 15 13:09:00 2012] Offset between fit and detection position for source 1 = 0.076941 pixels
[Fri Jun 15 13:09:00 2012] 25380.320000 total counts/ 4964.120000 bgd. counts: snr = 289.770237
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.076941 pixels
  Position = (288.9, 276.8) = 16 38 30.91 -20 55 25.4
  Extent = 6.0 (5.9-6.0)", rotation angle = 0
  Source counts = 20416.2 +/- 159.3
  Background counts = 4964.1
  Rate = 2 +/- 0.02
[Fri Jun 15 13:09:00 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 13:09:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 13:09:00 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 13:09:00 2012] Source does appear to be extended
[Fri Jun 15 13:09:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 13:09:07 2012] Counts = 20416.200000, rescaling region sizes by 3.000000
[Fri Jun 15 13:09:07 2012] XMMSAS src. selection expression = ellipse(25087.392200, 24036.469600, 1078.799431, 1078.799431, 0.000000, X, Y)
[Fri Jun 15 13:09:07 2012] Writing source region out to fullrun_pn_xmm0550451301_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 15 13:09:07 2012] Extracting stamp from image fullrun_pn_xmm0550451301_pi300-10000_cl_sm2.00.img.gz, (227, 215) - (351, 339)
[Fri Jun 15 13:09:07 2012] XMMSAS bgd. selection expression = annulus(25087.392200, 24036.469600, 5393.997155, 10787.994310, X, Y) && !ellipse(25846.217000, 27084.223400, 435.021613, 435.021613, 0.000000, X, Y) && !ellipse(22410.654298, 25884.724557, 456.577810, 419.618626, 230.425367, X, Y) && !ellipse(23498.099800, 35687.132000, 1701.184049, 495.939214, 77.730800, X, Y) && !ellipse(23598.871372, 34706.990051, 1620.256047, 348.864945, 79.918640, X, Y) && !ellipse(23685.929400, 34430.354000, 1172.344034, 1172.344034, 0.000000, X, Y) && !ellipse(23781.740800, 33528.396600, 1043.752030, 1043.752030, 0.000000, X, Y) && !ellipse(23777.876800, 33276.270000, 1016.768029, 1016.768029, 0.000000, X, Y) && !ellipse(24027.321200, 31806.662800, 965.960028, 965.960028, 0.000000, X, Y) && !ellipse(34417.630066, 30759.315643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24155.603180, 30692.552600, 1506.096043, 606.924017, 85.855693, X, Y) && !ellipse(24271.823600, 29876.927560, 653.813619, 653.813619, 0.000000, X, Y) && !ellipse(24434.793800, 28425.299600, 791.044023, 791.044023, 0.000000, X, Y) && !ellipse(24458.760200, 28321.293400, 846.896024, 846.896024, 0.000000, X, Y) && !ellipse(24829.317200, 25603.070000, 1102.416032, 1102.416032, 0.000000, X, Y) && !ellipse(28180.509583, 13202.614487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24871.257172, 18146.484802, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 13:09:07 2012] Writing fullrun_pn_xmm0550451301_pi300-10000_pass1_cl_src1.gif
[Fri Jun 15 13:09:18 2012] Mean detx,y = (22.86, -264.13) 
[Fri Jun 15 13:09:22 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 13:13:25 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 13:13:25 2012] Setting source spectrum file to fullrun_pn_xmm0550451301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 13:13:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550451301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 15 14:30:48 2012] Updating aperture counts using extracted products
[Fri Jun 15 14:30:48 2012] Error reading totcts from fullrun_pn_xmm0550451301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 14:30:48 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 14:30:48 2012] Using photon index=1.80, rate=2.26, arf fullrun_pn_xmm0550451301_pi300-10000_pass1_cl_src1.arf
[Fri Jun 15 14:30:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 14:30:48 2012] Updating source flux to 5.4e-12
[Fri Jun 15 14:32:19 2012] Reading fit data from xmm0550451301/analysis//spectral/fullrun_pn_xmm0550451301_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun 15 14:32:19 2012] Spectral fit parameter nH value = 1.81454e+21
[Fri Jun 15 14:32:19 2012] Spectral fit parameter PhoIndex value = 2.10476
[Fri Jun 15 14:32:19 2012] Failed to get F(0.3-8.0) from xmm0550451301/analysis//spectral/fullrun_pn_xmm0550451301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun 15 14:32:19 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 14:32:19 2012] Using Nh = 1.8e+21, photon index=2.10, rate=2.26, arf fullrun_pn_xmm0550451301_pi300-10000_pass1_cl_src1.arf
[Fri Jun 15 14:32:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 14:32:19 2012] Updating source flux to 6.3e-12