[Fri Jun 15 10:10:16 2012] Detection parameters:
  Position = (289.1, 276.9) = 16 38 30.85 -20 55 25.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 12997.7 +/- 135.8
  Background counts = 9.2
  Rate = 1 +/- 0.01

[Fri Jun 15 10:10:16 2012] Off-axis axis estimate = 1.70'
[Fri Jun 15 11:28:29 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 11:28:29 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Fri Jun 15 11:28:29 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Fri Jun 15 11:28:29 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Fri Jun 15 11:47:18 2012] fullrun_mos2_xmm0550451301_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 15 11:47:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451301_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 11:47:18 2012] fullrun_mos2_xmm0550451301_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 15 11:47:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451301_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 11:47:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550451301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550451301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 11:47:18 2012] fullrun_mos2_xmm0550451301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 15 11:47:18 2012] fullrun_mos2_xmm0550451301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 15 11:47:18 2012] Fit fullrun_mos2_xmm0550451301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 15 11:47:28 2012] Spatial fit model total counts = 11898.400000, observed total counts = 11518.000000
[Fri Jun 15 11:47:28 2012] Offset between fit and detection position for source 1 = 0.065223 pixels
[Fri Jun 15 11:47:28 2012] 11836.480000 total counts/ 2836.380000 bgd. counts: snr = 168.991604
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.065223 pixels
  Position = (289.1, 276.9) = 16 38 30.84 -20 55 25.3
  Extent = 5.6 (5.5-5.7)", rotation angle = 0
  Source counts = 9000.1 +/- 108.8
  Background counts = 2836.4
  Rate = 0.7 +/- 0.009
[Fri Jun 15 11:47:28 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 11:47:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 11:47:28 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 11:47:28 2012] Source does appear to be extended
[Fri Jun 15 11:47:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 13:03:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 13:03:47 2012] Initial guess for spatial extent in simple fitting = 5.55"
[Fri Jun 15 13:03:47 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.268
[Fri Jun 15 13:03:47 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.55"
[Fri Jun 15 13:08:54 2012] fullrun_mos2_xmm0550451301_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 15 13:08:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451301_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 13:08:54 2012] fullrun_mos2_xmm0550451301_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 15 13:08:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550451301_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 13:08:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550451301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550451301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 13:08:54 2012] fullrun_mos2_xmm0550451301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 15 13:08:54 2012] fullrun_mos2_xmm0550451301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 15 13:08:54 2012] Fit fullrun_mos2_xmm0550451301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 15 13:09:02 2012] Spatial fit model total counts = 11883.600000, observed total counts = 11511.000000
[Fri Jun 15 13:09:02 2012] Offset between fit and detection position for source 1 = 0.016851 pixels
[Fri Jun 15 13:09:02 2012] 11888.300000 total counts/ 2875.860000 bgd. counts: snr = 168.057739
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.016851 pixels
  Position = (289.1, 276.9) = 16 38 30.84 -20 55 25.3
  Extent = 5.6 (5.5-5.7)", rotation angle = 0
  Source counts = 9012.4 +/- 109.0
  Background counts = 2875.9
  Rate = 0.7 +/- 0.009
[Fri Jun 15 13:09:02 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 13:09:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 13:09:02 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 13:09:02 2012] Source does appear to be extended
[Fri Jun 15 13:09:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 14:26:12 2012] Counts = 9012.440000, rescaling region sizes by 2.000000
[Fri Jun 15 14:26:12 2012] XMMSAS src. selection expression = ellipse(25106.608960, 24038.761360, 667.095619, 667.095619, 0.000000, X, Y)
[Fri Jun 15 14:26:12 2012] Writing source region out to fullrun_mos2_xmm0550451301_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 15 14:26:12 2012] Extracting stamp from image fullrun_mos2_xmm0550451301_pi300-10000_cl_sm2.00.img.gz, (251, 239) - (327, 315)
[Fri Jun 15 14:26:12 2012] XMMSAS bgd. selection expression = annulus(25106.608960, 24038.761360, 2223.652064, 4447.304128, X, Y)
[Fri Jun 15 14:26:12 2012] Writing fullrun_mos2_xmm0550451301_pi300-10000_pass1_cl_src1.gif
[Fri Jun 15 14:26:15 2012] Mean detx,y = (149.17, 126.64) 
[Fri Jun 15 14:26:16 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 14:26:30 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 14:26:30 2012] Setting source spectrum file to fullrun_mos2_xmm0550451301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 14:26:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550451301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 15 14:30:48 2012] Updating aperture counts using extracted products
[Fri Jun 15 14:30:48 2012] Error reading totcts from fullrun_mos2_xmm0550451301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 14:30:48 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 14:30:48 2012] Using photon index=1.80, rate=0.745, arf fullrun_mos2_xmm0550451301_pi300-10000_pass1_cl_src1.arf
[Fri Jun 15 14:30:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 14:30:48 2012] Updating source flux to 8.1e-12
[Fri Jun 15 14:31:16 2012] Reading fit data from xmm0550451301/analysis//spectral/fullrun_mos2_xmm0550451301_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun 15 14:31:16 2012] Spectral fit parameter nH value = 1.5492e+21
[Fri Jun 15 14:31:16 2012] Spectral fit parameter PhoIndex value = 1.96244
[Fri Jun 15 14:31:16 2012] Failed to get F(0.3-8.0) from xmm0550451301/analysis//spectral/fullrun_mos2_xmm0550451301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun 15 14:31:16 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 14:31:16 2012] Using Nh = 1.5e+21, photon index=1.96, rate=0.745, arf fullrun_mos2_xmm0550451301_pi300-10000_pass1_cl_src1.arf
[Fri Jun 15 14:31:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 14:31:16 2012] Updating source flux to 8.5e-12