[Fri Jun 15 10:09:54 2012] Detection parameters:
  Position = (289.1, 277.0) = 16 38 30.86 -20 55 24.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 13480.3 +/- 139.6
  Background counts = 10.5
  Rate = 1 +/- 0.01

[Fri Jun 15 10:09:55 2012] Off-axis axis estimate = 1.69'
[Fri Jun 15 11:18:19 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 11:18:19 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Fri Jun 15 11:18:19 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Fri Jun 15 11:18:19 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Fri Jun 15 11:28:29 2012] fullrun_mos1_xmm0550451301_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 15 11:28:29 2012] fullrun_mos1_xmm0550451301_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 15 11:28:29 2012] Fit fullrun_mos1_xmm0550451301_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri Jun 15 11:28:29 2012] fullrun_mos1_xmm0550451301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 15 11:28:29 2012] fullrun_mos1_xmm0550451301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 15 11:28:29 2012] Fit fullrun_mos1_xmm0550451301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 15 11:47:26 2012] Spatial fit model total counts = 11682.000000, observed total counts = 11682.000000
[Fri Jun 15 11:47:26 2012] Offset between fit and detection position for source 1 = 0.030819 pixels
[Fri Jun 15 11:47:26 2012] 11696.360000 total counts/ 2490.320000 bgd. counts: snr = 184.478296
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.030819 pixels
  Position = (289.1, 277.0) = 16 38 30.85 -20 55 24.6
  Extent = 5.9" x 5.6", rotation angle = -0
  Source counts = 9206.0 +/- 108.1
  Background counts = 2490.3
  Rate = 0.8 +/- 0.009
[Fri Jun 15 11:47:26 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 11:47:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 11:47:26 2012] Assessing source extent using major
[Fri Jun 15 11:47:26 2012] Source does appear to be extended
[Fri Jun 15 11:47:26 2012] Computing asymmetry using major and minor axis, asym = 1.05
[Fri Jun 15 12:58:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 12:58:58 2012] Initial guess for spatial extent in simple fitting = 5.73"
[Fri Jun 15 12:58:58 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.211
[Fri Jun 15 12:58:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.73"
[Fri Jun 15 13:03:47 2012] fullrun_mos1_xmm0550451301_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 15 13:03:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550451301_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 13:03:47 2012] fullrun_mos1_xmm0550451301_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 15 13:03:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550451301_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 13:03:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550451301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550451301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 13:03:47 2012] fullrun_mos1_xmm0550451301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 15 13:03:47 2012] fullrun_mos1_xmm0550451301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 15 13:03:47 2012] Fit fullrun_mos1_xmm0550451301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 15 13:09:01 2012] Spatial fit model total counts = 11682.000000, observed total counts = 11682.000000
[Fri Jun 15 13:09:01 2012] Offset between fit and detection position for source 1 = 0.001559 pixels
[Fri Jun 15 13:09:01 2012] 11695.960000 total counts/ 2488.040000 bgd. counts: snr = 184.600494
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001559 pixels
  Position = (289.1, 277.0) = 16 38 30.85 -20 55 24.6
  Extent = 5.7 (5.6-5.8)", rotation angle = 0
  Source counts = 9207.9 +/- 108.1
  Background counts = 2488.0
  Rate = 0.8 +/- 0.009
[Fri Jun 15 13:09:01 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 13:09:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 13:09:01 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 13:09:01 2012] Source does appear to be extended
[Fri Jun 15 13:09:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 14:19:54 2012] Counts = 9207.920000, rescaling region sizes by 2.000000
[Fri Jun 15 14:19:54 2012] XMMSAS src. selection expression = ellipse(25101.748000, 24054.418400, 688.508420, 688.508420, 0.000000, X, Y)
[Fri Jun 15 14:19:54 2012] Writing source region out to fullrun_mos1_xmm0550451301_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 15 14:19:54 2012] Extracting stamp from image fullrun_mos1_xmm0550451301_pi300-10000_cl_sm2.00.img.gz, (250, 237) - (329, 317)
[Fri Jun 15 14:19:54 2012] XMMSAS bgd. selection expression = annulus(25101.748000, 24054.418400, 2295.028066, 4590.056132, X, Y) && !ellipse(22442.003600, 25879.314800, 292.142408, 292.142408, 0.000000, X, Y) && !ellipse(25868.935000, 27109.757000, 571.498416, 373.589611, 101.555622, X, Y)
[Fri Jun 15 14:19:54 2012] Writing fullrun_mos1_xmm0550451301_pi300-10000_pass1_cl_src1.gif
[Fri Jun 15 14:19:56 2012] Mean detx,y = (328.89, -313.35) 
[Fri Jun 15 14:19:57 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 14:20:09 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 14:20:10 2012] Setting source spectrum file to fullrun_mos1_xmm0550451301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 14:20:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550451301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 15 14:30:48 2012] Updating aperture counts using extracted products
[Fri Jun 15 14:30:48 2012] Error reading totcts from fullrun_mos1_xmm0550451301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 14:30:48 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 14:30:48 2012] Using photon index=1.80, rate=0.755, arf fullrun_mos1_xmm0550451301_pi300-10000_pass1_cl_src1.arf
[Fri Jun 15 14:30:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 14:30:48 2012] Updating source flux to 7.4e-12
[Fri Jun 15 14:31:03 2012] Reading fit data from xmm0550451301/analysis//spectral/fullrun_mos1_xmm0550451301_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun 15 14:31:03 2012] Spectral fit parameter nH value = 1.48558e+21
[Fri Jun 15 14:31:03 2012] Spectral fit parameter PhoIndex value = 1.98899
[Fri Jun 15 14:31:03 2012] Failed to get F(0.3-8.0) from xmm0550451301/analysis//spectral/fullrun_mos1_xmm0550451301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun 15 14:31:03 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 14:31:03 2012] Using Nh = 1.5e+21, photon index=1.99, rate=0.755, arf fullrun_mos1_xmm0550451301_pi300-10000_pass1_cl_src1.arf
[Fri Jun 15 14:31:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 14:31:03 2012] Updating source flux to 7.7e-12