[Sun Jul 22 11:08:54 2012] Detection parameters:
  Position = (277.6, 360.7) = 13 10 57.16 -55 46 13.3
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 483.5 +/- 54.4
  Background counts = 2834.3
  Rate = 0.03 +/- 0.003

[Sun Jul 22 11:08:57 2012] Off-axis axis estimate = 4.76'
[Sun Jul 22 11:16:48 2012] Using EEF radius (= 8.81 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 11:16:48 2012] Initial guess for spatial extent in simple fitting = 8.81"
[Sun Jul 22 11:16:48 2012] source mask rpix=2.0, npix_max = 25, mask sum = 13, frac = 0.510
[Sun Jul 22 11:16:48 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 8.81"
[Sun Jul 22 15:17:41 2012] fullrun_pn_xmm0550450901_pi300-10000_cl_pass0_src8.ximg exists
[Sun Jul 22 15:17:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550450901_pi300-10000_cl_pass0_src8.csv
[Sun Jul 22 15:17:41 2012] fullrun_pn_xmm0550450901_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Jul 22 15:17:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550450901_pi300-10000_cl_pass0_src8.csv
[Sun Jul 22 15:17:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550450901_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550450901_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 15:17:42 2012] fullrun_pn_xmm0550450901_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Jul 22 15:17:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550450901_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Jul 22 15:17:42 2012] fullrun_pn_xmm0550450901_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Jul 22 15:17:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550450901_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Jul 22 15:17:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550450901_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550450901_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 15:33:33 2012] Source 14 is offset by 2.442376 and -8.425993 pixels which is larger than
2 X fitted extent = 1.012395 x 1.012395, not incorporating fit results
[Sun Jul 22 15:33:34 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 15:33:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 15:33:34 2012] Assessing source extent using major
[Sun Jul 22 15:33:34 2012] Source does appear to be extended
[Sun Jul 22 15:33:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 15:33:53 2012] Using EEF radius (= 8.81 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 15:33:53 2012] Initial guess for spatial extent in simple fitting = 8.81"
[Sun Jul 22 15:33:53 2012] source mask rpix=2.0, npix_max = 25, mask sum = 13, frac = 0.510
[Sun Jul 22 15:33:53 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 8.81"
[Sun Jul 22 19:36:07 2012] fullrun_pn_xmm0550450901_pi300-10000_cl_pass1_src8.ximg exists
[Sun Jul 22 19:36:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550450901_pi300-10000_cl_pass1_src8.csv
[Sun Jul 22 19:36:07 2012] fullrun_pn_xmm0550450901_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun Jul 22 19:36:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550450901_pi300-10000_cl_pass1_src8.csv
[Sun Jul 22 19:36:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550450901_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550450901_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 19:36:08 2012] fullrun_pn_xmm0550450901_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun Jul 22 19:36:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550450901_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun Jul 22 19:36:08 2012] fullrun_pn_xmm0550450901_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Jul 22 19:36:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550450901_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun Jul 22 19:36:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550450901_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550450901_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 19:49:18 2012] Source 14 is offset by -0.421968 and -8.256315 pixels which is larger than
2 X fitted extent = 8.099173 x 8.099173, not incorporating fit results
[Sun Jul 22 19:49:19 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 19:49:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 19:49:19 2012] Assessing source extent using major
[Sun Jul 22 19:49:19 2012] Source does appear to be extended
[Sun Jul 22 19:49:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 19:49:31 2012] XMMSAS src. selection expression = ellipse(24101.864197, 31330.064636, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jul 22 19:49:31 2012] Writing source region out to fullrun_pn_xmm0550450901_pi300-10000_pass1_cl_src14_src.reg
[Sun Jul 22 19:49:31 2012] Extracting stamp from image fullrun_pn_xmm0550450901_pi300-10000_cl_sm2.00.img.gz, (203, 286) - (353, 436)
[Sun Jul 22 19:49:31 2012] XMMSAS bgd. selection expression = annulus(24101.864197, 31330.064636, 2175.000000, 4350.000000, X, Y) && !ellipse(20675.562164, 33663.792908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22885.773163, 30201.379822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18722.073914, 35569.480011, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(18960.937607, 34996.137054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21696.525803, 33745.097870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19716.497879, 33362.003693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21807.881714, 31631.075928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22770.985800, 30873.358000, 1219.488035, 1219.488035, 0.000000, X, Y) && !ellipse(24938.498444, 28901.923523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29195.075928, 27883.645447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27660.296417, 26833.183105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28505.620575, 26305.604889, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 22 19:49:31 2012] Writing fullrun_pn_xmm0550450901_pi300-10000_pass1_cl_src14.gif
[Sun Jul 22 20:01:49 2012] Mean detx,y = (-4094.35, 6296.47) 
[Sun Jul 22 20:01:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 20:02:40 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 20:02:41 2012] Setting source spectrum file to fullrun_pn_xmm0550450901_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sun Jul 22 20:02:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550450901_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sun Jul 22 20:31:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 22 20:31:15 2012] rmf not generated due to insufficient counts
[Sun Jul 22 20:57:53 2012] Updating aperture counts using extracted products
[Sun Jul 22 20:57:53 2012] Error reading totcts from fullrun_pn_xmm0550450901_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sun Jul 22 20:57:55 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 22 20:57:55 2012] Using photon index=1.80, rate=0.0283, arf fullrun_pn_xmm0550450901_pi300-10000_pass1_cl_src14.arf
[Sun Jul 22 20:57:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 22 20:57:55 2012] Updating source flux to 1.1e-13
[Sun Jul 22 20:58:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting