[Sun Jul 22 11:09:33 2012] Detection parameters:
  Position = (227.2, 149.2) = 13 11 23.40 -56 1 19.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 645.7 +/- 37.1
  Background counts = 191.2
  Rate = 0.06 +/- 0.003

[Sun Jul 22 11:09:33 2012] Off-axis axis estimate = 11.99'
[Sun Jul 22 15:17:43 2012] Using EEF radius (= 12.43 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 15:17:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 22 15:17:43 2012] Initial guess for spatial extent in simple fitting = 12.43"
[Sun Jul 22 15:17:43 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.087
[Sun Jul 22 15:17:43 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 12.43"
[Sun Jul 22 15:31:24 2012] fullrun_mos1_xmm0550450901_pi300-10000_cl_pass0_src2.ximg exists
[Sun Jul 22 15:31:24 2012] fullrun_mos1_xmm0550450901_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Jul 22 15:31:24 2012] Fit fullrun_mos1_xmm0550450901_pi300-10000_cl_pass0_src2 appears to have run properly
[Sun Jul 22 15:31:24 2012] fullrun_mos1_xmm0550450901_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Jul 22 15:31:24 2012] fullrun_mos1_xmm0550450901_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Jul 22 15:31:24 2012] Fit fullrun_mos1_xmm0550450901_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Jul 22 15:33:37 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 13.747859 pixels away
[Sun Jul 22 15:33:37 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 15:33:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 15:33:37 2012] Assessing source extent using major
[Sun Jul 22 15:33:37 2012] Source does appear to be extended
[Sun Jul 22 15:33:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 19:36:09 2012] Using EEF radius (= 12.43 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 19:36:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 22 19:36:09 2012] Initial guess for spatial extent in simple fitting = 12.43"
[Sun Jul 22 19:36:09 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.087
[Sun Jul 22 19:36:09 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 12.43"
[Sun Jul 22 19:47:43 2012] fullrun_mos1_xmm0550450901_pi300-10000_cl_pass1_src2.ximg exists
[Sun Jul 22 19:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550450901_pi300-10000_cl_pass1_src2.csv
[Sun Jul 22 19:47:43 2012] fullrun_mos1_xmm0550450901_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Jul 22 19:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550450901_pi300-10000_cl_pass1_src2.csv
[Sun Jul 22 19:47:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550450901_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550450901_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 19:47:43 2012] fullrun_mos1_xmm0550450901_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Jul 22 19:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550450901_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jul 22 19:47:43 2012] fullrun_mos1_xmm0550450901_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Jul 22 19:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550450901_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jul 22 19:47:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550450901_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550450901_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 19:49:20 2012] Spatial fit model total counts = 1771.580000, observed total counts = 1141.000000
[Sun Jul 22 19:49:20 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 22 19:49:20 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 19:49:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 19:49:20 2012] Assessing source extent using major
[Sun Jul 22 19:49:20 2012] Source does appear to be extended
[Sun Jul 22 19:49:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 20:39:39 2012] XMMSAS src. selection expression = ellipse(19714.048615, 12927.649033, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 22 20:39:39 2012] Writing source region out to fullrun_mos1_xmm0550450901_pi300-10000_pass1_cl_src9_src.reg
[Sun Jul 22 20:39:39 2012] Extracting stamp from image fullrun_mos1_xmm0550450901_pi300-10000_cl_sm2.00.img.gz, (190, 112) - (265, 187)
[Sun Jul 22 20:39:39 2012] XMMSAS bgd. selection expression = annulus(19714.048615, 12927.649033, 1087.500000, 2175.000000, X, Y)
[Sun Jul 22 20:39:39 2012] Writing fullrun_mos1_xmm0550450901_pi300-10000_pass1_cl_src9.gif
[Sun Jul 22 20:40:05 2012] Mean detx,y = (2208.36, 12553.88) 
[Sun Jul 22 20:40:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 20:40:20 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 20:40:20 2012] Setting source spectrum file to fullrun_mos1_xmm0550450901_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun Jul 22 20:40:20 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550450901_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sun Jul 22 20:51:16 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 22 20:51:16 2012] rmf not generated due to insufficient counts
[Sun Jul 22 20:57:56 2012] Updating aperture counts using extracted products
[Sun Jul 22 20:57:56 2012] Error reading totcts from fullrun_mos1_xmm0550450901_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun Jul 22 20:57:57 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 22 20:57:57 2012] Using photon index=1.80, rate=0.0604, arf fullrun_mos1_xmm0550450901_pi300-10000_pass1_cl_src9.arf
[Sun Jul 22 20:57:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 22 20:57:57 2012] Updating source flux to 1e-12
[Sun Jul 22 20:57:58 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting