[Sun Jul 22 11:09:33 2012] Detection parameters:
  Position = (328.5, 166.0) = 13 10 30.81 -56 0 6.5
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 147.8 +/- 18.0
  Background counts = 628.3
  Rate = 0.007 +/- 0.0009

[Sun Jul 22 11:09:33 2012] Off-axis axis estimate = 9.84'
[Sun Jul 22 15:17:43 2012] Using EEF radius (= 11.35 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 15:17:43 2012] Initial guess for spatial extent in simple fitting = 11.35"
[Sun Jul 22 15:17:43 2012] source mask rpix=2.6, npix_max = 38, mask sum = 28, frac = 0.724
[Sun Jul 22 15:17:43 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 11.35"
[Sun Jul 22 15:31:24 2012] fullrun_mos1_xmm0550450901_pi300-10000_cl_pass0_src8.ximg exists
[Sun Jul 22 15:31:24 2012] fullrun_mos1_xmm0550450901_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Jul 22 15:31:24 2012] Fit fullrun_mos1_xmm0550450901_pi300-10000_cl_pass0_src8 appears to have run properly
[Sun Jul 22 15:31:24 2012] fullrun_mos1_xmm0550450901_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Jul 22 15:31:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550450901_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Jul 22 15:31:24 2012] fullrun_mos1_xmm0550450901_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Jul 22 15:31:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550450901_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Jul 22 15:31:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550450901_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550450901_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 15:33:37 2012] Source 8 is offset by -7.273574 and 1.000786 pixels which is larger than
2 X fitted extent = 1.022101 x 1.022101, not incorporating fit results
[Sun Jul 22 15:33:37 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 15:33:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 15:33:37 2012] Assessing source extent using major
[Sun Jul 22 15:33:37 2012] Source does appear to be extended
[Sun Jul 22 15:33:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 19:36:09 2012] Using EEF radius (= 11.35 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 19:36:09 2012] Initial guess for spatial extent in simple fitting = 11.35"
[Sun Jul 22 19:36:09 2012] source mask rpix=2.6, npix_max = 38, mask sum = 28, frac = 0.724
[Sun Jul 22 19:36:09 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 11.35"
[Sun Jul 22 19:47:43 2012] fullrun_mos1_xmm0550450901_pi300-10000_cl_pass1_src8.ximg exists
[Sun Jul 22 19:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550450901_pi300-10000_cl_pass1_src8.csv
[Sun Jul 22 19:47:43 2012] fullrun_mos1_xmm0550450901_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun Jul 22 19:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550450901_pi300-10000_cl_pass1_src8.csv
[Sun Jul 22 19:47:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550450901_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550450901_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 19:47:43 2012] fullrun_mos1_xmm0550450901_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun Jul 22 19:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550450901_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun Jul 22 19:47:43 2012] fullrun_mos1_xmm0550450901_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Jul 22 19:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550450901_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun Jul 22 19:47:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550450901_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550450901_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 19:49:20 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 13.278119 pixels away
[Sun Jul 22 19:49:20 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 19:49:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 19:49:20 2012] Assessing source extent using major
[Sun Jul 22 19:49:20 2012] Source does appear to be extended
[Sun Jul 22 19:49:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 20:39:39 2012] XMMSAS src. selection expression = ellipse(28532.051392, 14397.082962, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jul 22 20:39:39 2012] Writing source region out to fullrun_mos1_xmm0550450901_pi300-10000_pass1_cl_src8_src.reg
[Sun Jul 22 20:39:39 2012] Extracting stamp from image fullrun_mos1_xmm0550450901_pi300-10000_cl_sm2.00.img.gz, (254, 91) - (404, 241)
[Sun Jul 22 20:39:39 2012] XMMSAS bgd. selection expression = annulus(28532.051392, 14397.082962, 2175.000000, 4350.000000, X, Y) && !ellipse(30229.122223, 20182.905548, 1740.000000, 1740.000000, 0.000000, X, Y)
[Sun Jul 22 20:39:39 2012] Writing fullrun_mos1_xmm0550450901_pi300-10000_pass1_cl_src8.gif
[Sun Jul 22 20:43:26 2012] Mean detx,y = (7988.30, 5652.44) 
[Sun Jul 22 20:43:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 20:44:11 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 20:44:11 2012] Setting source spectrum file to fullrun_mos1_xmm0550450901_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Jul 22 20:44:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550450901_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sun Jul 22 20:56:02 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 22 20:56:02 2012] rmf not generated due to insufficient counts
[Sun Jul 22 20:57:56 2012] Updating aperture counts using extracted products
[Sun Jul 22 20:57:56 2012] Error reading totcts from fullrun_mos1_xmm0550450901_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Jul 22 20:57:57 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 22 20:57:57 2012] Using photon index=1.80, rate=0.00726, arf fullrun_mos1_xmm0550450901_pi300-10000_pass1_cl_src8.arf
[Sun Jul 22 20:57:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 22 20:57:57 2012] Updating source flux to 1.1e-13
[Sun Jul 22 20:57:58 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting