[Sat Jun 16 08:04:37 2012] Detection parameters:
  Position = (310.4, 238.8) = 9 52 21.10 -62 35 24.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.6 +/- 10.7
  Background counts = 11.1
  Rate = 0.003 +/- 0.0006

[Sat Jun 16 08:04:37 2012] Off-axis axis estimate = 4.41'
[Sat Jun 16 08:51:48 2012] Using EEF radius (= 8.63 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 08:51:48 2012] Initial guess for spatial extent in simple fitting = 8.63"
[Sat Jun 16 08:51:48 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.012
[Sat Jun 16 08:51:48 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 8.63"
[Sat Jun 16 09:10:10 2012] fullrun_mos2_xmm0550450701_pi300-10000_cl_pass0_src7.ximg exists
[Sat Jun 16 09:10:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550450701_pi300-10000_cl_pass0_src7.csv
[Sat Jun 16 09:10:10 2012] fullrun_mos2_xmm0550450701_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat Jun 16 09:10:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550450701_pi300-10000_cl_pass0_src7.csv
[Sat Jun 16 09:10:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550450701_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550450701_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 09:10:11 2012] fullrun_mos2_xmm0550450701_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat Jun 16 09:10:11 2012] fullrun_mos2_xmm0550450701_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Jun 16 09:10:11 2012] Fit fullrun_mos2_xmm0550450701_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sat Jun 16 09:10:22 2012] Spatial fit model total counts = 174.847000, observed total counts = 172.000000
[Sat Jun 16 09:10:22 2012] Offset between fit and detection position for source 13 = 0.082749 pixels
[Sat Jun 16 09:10:22 2012] 174.953900 total counts/ 137.613000 bgd. counts: snr = 3.183135
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.082749 pixels
  Position = (310.4, 238.7) = 9 52 21.07 -62 35 24.8
  Extent = 4.0 (3.1-6.1)", rotation angle = 0
  Source counts = 37.3 +/- 13.2
  Background counts = 137.6
  Rate = 0.002 +/- 0.0006
[Sat Jun 16 09:10:22 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 09:10:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 09:10:22 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 09:10:22 2012] Source does appear to be extended
[Sat Jun 16 09:10:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 09:54:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 16 09:54:06 2012] Initial guess for spatial extent in simple fitting = 4.00"
[Sat Jun 16 09:54:06 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.116
[Sat Jun 16 09:54:06 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 4.00"
[Sat Jun 16 10:09:25 2012] fullrun_mos2_xmm0550450701_pi300-10000_cl_pass1_src7.ximg exists
[Sat Jun 16 10:09:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550450701_pi300-10000_cl_pass1_src7.csv
[Sat Jun 16 10:09:25 2012] fullrun_mos2_xmm0550450701_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat Jun 16 10:09:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550450701_pi300-10000_cl_pass1_src7.csv
[Sat Jun 16 10:09:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550450701_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550450701_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 10:09:25 2012] fullrun_mos2_xmm0550450701_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat Jun 16 10:09:25 2012] fullrun_mos2_xmm0550450701_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Jun 16 10:09:25 2012] Fit fullrun_mos2_xmm0550450701_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sat Jun 16 10:09:42 2012] Spatial fit model total counts = 174.735000, observed total counts = 172.000000
[Sat Jun 16 10:09:42 2012] Offset between fit and detection position for source 13 = 0.004296 pixels
[Sat Jun 16 10:09:42 2012] 176.885400 total counts/ 139.535000 bgd. counts: snr = 3.161940
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.004296 pixels
  Position = (310.4, 238.7) = 9 52 21.06 -62 35 24.8
  Extent = 4.0 (3.0-6.1)", rotation angle = 0
  Source counts = 37.4 +/- 13.3
  Background counts = 139.5
  Rate = 0.002 +/- 0.0006
[Sat Jun 16 10:09:42 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 10:09:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 10:09:42 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 10:09:42 2012] Source does appear to be extended
[Sat Jun 16 10:09:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 11:01:52 2012] XMMSAS src. selection expression = ellipse(26959.040200, 20721.907400, 242.103007, 242.103007, 0.000000, X, Y)
[Sat Jun 16 11:01:52 2012] Writing source region out to fullrun_mos2_xmm0550450701_pi300-10000_pass1_cl_src13_src.reg
[Sat Jun 16 11:01:52 2012] Extracting stamp from image fullrun_mos2_xmm0550450701_pi300-10000_cl_sm2.00.img.gz, (297, 225) - (324, 253)
[Sat Jun 16 11:01:52 2012] XMMSAS bgd. selection expression = annulus(26959.040200, 20721.907400, 403.505012, 807.010023, X, Y)
[Sat Jun 16 11:01:52 2012] Writing fullrun_mos2_xmm0550450701_pi300-10000_pass1_cl_src13.gif
[Sat Jun 16 11:05:41 2012] Mean detx,y = (-3158.65, 1383.45) 
[Sat Jun 16 11:05:42 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 11:05:48 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 11:05:48 2012] Setting source spectrum file to fullrun_mos2_xmm0550450701_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Jun 16 11:05:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550450701_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat Jun 16 11:11:39 2012] Not generating rmf since there are only 37 counts
[Sat Jun 16 11:11:39 2012] rmf not generated due to insufficient counts
[Sat Jun 16 11:12:41 2012] Updating aperture counts using extracted products
[Sat Jun 16 11:12:41 2012] Error reading totcts from fullrun_mos2_xmm0550450701_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Jun 16 11:12:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 11:12:41 2012] Using photon index=1.80, rate=0.0018, arf fullrun_mos2_xmm0550450701_pi300-10000_pass1_cl_src13.arf
[Sat Jun 16 11:12:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 11:12:41 2012] Updating source flux to 2.8e-14
[Sat Jun 16 11:13:05 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting