[Sat Jun 16 08:04:16 2012] Detection parameters:
  Position = (311.1, 277.2) = 9 52 20.62 -62 32 36.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2633.2 +/- 61.7
  Background counts = 13.2
  Rate = 0.1 +/- 0.003

[Sat Jun 16 08:04:17 2012] Off-axis axis estimate = 1.79'
[Sat Jun 16 08:36:32 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 08:36:32 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Sat Jun 16 08:36:32 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.839
[Sat Jun 16 08:36:32 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.33"
[Sat Jun 16 08:51:47 2012] fullrun_mos1_xmm0550450701_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 16 08:51:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550450701_pi300-10000_cl_pass0_src1.csv
[Sat Jun 16 08:51:47 2012] fullrun_mos1_xmm0550450701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 16 08:51:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550450701_pi300-10000_cl_pass0_src1.csv
[Sat Jun 16 08:51:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550450701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550450701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 08:51:47 2012] fullrun_mos1_xmm0550450701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 16 08:51:47 2012] fullrun_mos1_xmm0550450701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 16 08:51:47 2012] Fit fullrun_mos1_xmm0550450701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun 16 09:10:19 2012] Spatial fit model total counts = 2430.990000, observed total counts = 2431.000000
[Sat Jun 16 09:10:19 2012] Offset between fit and detection position for source 3 = 0.129723 pixels
[Sat Jun 16 09:10:19 2012] 2427.524000 total counts/ 660.324000 bgd. counts: snr = 68.771289
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.129723 pixels
  Position = (311.2, 277.3) = 9 52 20.61 -62 32 36.9
  Extent = 5.4 (5.1-5.6)", rotation angle = 0
  Source counts = 1767.2 +/- 49.3
  Background counts = 660.3
  Rate = 0.09 +/- 0.002
[Sat Jun 16 09:10:19 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 09:10:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 09:10:19 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 09:10:19 2012] Source does appear to be extended
[Sat Jun 16 09:10:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 09:38:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 16 09:38:33 2012] Initial guess for spatial extent in simple fitting = 5.35"
[Sat Jun 16 09:38:33 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.002
[Sat Jun 16 09:38:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.35"
[Sat Jun 16 09:54:06 2012] fullrun_mos1_xmm0550450701_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 16 09:54:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550450701_pi300-10000_cl_pass1_src1.csv
[Sat Jun 16 09:54:06 2012] fullrun_mos1_xmm0550450701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 16 09:54:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550450701_pi300-10000_cl_pass1_src1.csv
[Sat Jun 16 09:54:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550450701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550450701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 09:54:06 2012] fullrun_mos1_xmm0550450701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 16 09:54:06 2012] fullrun_mos1_xmm0550450701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 16 09:54:06 2012] Fit fullrun_mos1_xmm0550450701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun 16 10:09:40 2012] Spatial fit model total counts = 2431.000000, observed total counts = 2431.000000
[Sat Jun 16 10:09:40 2012] Offset between fit and detection position for source 3 = 0.000002 pixels
[Sat Jun 16 10:09:40 2012] 2427.537000 total counts/ 660.307000 bgd. counts: snr = 68.773341
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000002 pixels
  Position = (311.2, 277.3) = 9 52 20.61 -62 32 36.9
  Extent = 5.4 (5.1-5.6)", rotation angle = 0
  Source counts = 1767.2 +/- 49.3
  Background counts = 660.3
  Rate = 0.09 +/- 0.002
[Sat Jun 16 10:09:40 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 10:09:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 10:09:40 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 10:09:40 2012] Source does appear to be extended
[Sat Jun 16 10:09:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 10:47:25 2012] Counts = 1767.230000, rescaling region sizes by 2.000000
[Sat Jun 16 10:47:25 2012] XMMSAS src. selection expression = ellipse(27024.073120, 24078.473600, 642.190818, 642.190818, 0.000000, X, Y)
[Sat Jun 16 10:47:25 2012] Writing source region out to fullrun_mos1_xmm0550450701_pi300-10000_pass1_cl_src3_src.reg
[Sat Jun 16 10:47:25 2012] Extracting stamp from image fullrun_mos1_xmm0550450701_pi300-10000_cl_sm2.00.img.gz, (274, 240) - (348, 314)
[Sat Jun 16 10:47:25 2012] XMMSAS bgd. selection expression = annulus(27024.073120, 24078.473600, 2140.636062, 4281.272123, X, Y) && !ellipse(26938.492188, 20708.653122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27095.900440, 25972.697000, 576.824017, 576.824017, 0.000000, X, Y) && !ellipse(25739.971600, 19926.464200, 263.701608, 263.701608, 0.000000, X, Y)
[Sat Jun 16 10:47:25 2012] Writing fullrun_mos1_xmm0550450701_pi300-10000_pass1_cl_src3.gif
[Sat Jun 16 10:47:27 2012] Mean detx,y = (328.42, -108.09) 
[Sat Jun 16 10:47:28 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 10:47:43 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 10:47:43 2012] Setting source spectrum file to fullrun_mos1_xmm0550450701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 16 10:47:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550450701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jun 16 11:12:39 2012] Updating aperture counts using extracted products
[Sat Jun 16 11:12:39 2012] Error reading totcts from fullrun_mos1_xmm0550450701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 16 11:12:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 11:12:40 2012] Using photon index=1.80, rate=0.0854, arf fullrun_mos1_xmm0550450701_pi300-10000_pass1_cl_src3.arf
[Sat Jun 16 11:12:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 11:12:40 2012] Updating source flux to 8.2e-13
[Sat Jun 16 11:13:05 2012] Reading fit data from xmm0550450701/analysis//spectral/fullrun_mos1_xmm0550450701_pi300-10000_pass1_cl_src3_pl.csv
[Sat Jun 16 11:13:05 2012] Spectral fit parameter nH value = 5.69453e+22
[Sat Jun 16 11:13:05 2012] Spectral fit parameter PhoIndex value = 1.51622
[Sat Jun 16 11:13:05 2012] Failed to get F(0.3-8.0) from xmm0550450701/analysis//spectral/fullrun_mos1_xmm0550450701_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Jun 16 11:13:05 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 11:13:05 2012] Using Nh = 5.7e+22, photon index=1.52, rate=0.0854, arf fullrun_mos1_xmm0550450701_pi300-10000_pass1_cl_src3.arf
[Sat Jun 16 11:13:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 11:13:05 2012] Updating source flux to 2.4e-12