[Fri Sep  7 04:23:51 2012] Detection parameters:
  Position = (334.9, 315.2) = 2 44 46.98 62 28 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.4 +/- 14.0
  Background counts = 36.8
  Rate = 0.003 +/- 0.0008

[Fri Sep  7 04:23:52 2012] Off-axis axis estimate = 2.91'
[Fri Sep  7 04:47:39 2012] Using EEF radius (= 7.88 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 04:47:39 2012] Initial guess for spatial extent in simple fitting = 7.88"
[Fri Sep  7 04:47:39 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.935
[Fri Sep  7 04:47:39 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.88"
[Fri Sep  7 05:20:10 2012] fullrun_mos2_xmm0550450301_pi300-10000_cl_pass0_src11.ximg exists
[Fri Sep  7 05:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550450301_pi300-10000_cl_pass0_src11.csv
[Fri Sep  7 05:20:10 2012] fullrun_mos2_xmm0550450301_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Sep  7 05:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550450301_pi300-10000_cl_pass0_src11.csv
[Fri Sep  7 05:20:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550450301_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550450301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 05:20:10 2012] fullrun_mos2_xmm0550450301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Sep  7 05:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550450301_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Sep  7 05:20:10 2012] fullrun_mos2_xmm0550450301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Sep  7 05:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550450301_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Sep  7 05:20:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550450301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550450301_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 05:20:14 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 18.498526 pixels away
[Fri Sep  7 05:20:14 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 05:20:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 05:20:14 2012] Assessing source extent using major
[Fri Sep  7 05:20:14 2012] Source does appear to be extended
[Fri Sep  7 05:20:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 05:20:14 2012] Deleting source due to low Poisson probability 0.9