[Sun Jun 23 00:19:07 2013] Detection parameters:
  Position = (400.6, 477.1) = 0 2 48.37 70 31 7.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.5 +/- 12.6
  Background counts = 14.4
  Rate = 0.004 +/- 0.0006

[Sun Jun 23 00:19:08 2013] Off-axis axis estimate = 14.92'
[Sun Jun 23 00:57:50 2013] Using EEF radius (= 13.89 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 00:57:50 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 23 00:57:50 2013] Initial guess for spatial extent in simple fitting = 13.89"
[Sun Jun 23 00:57:50 2013] source mask rpix=3.2, npix_max = 54, mask sum = 52, frac = 0.953
[Sun Jun 23 00:57:50 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 13.89"
[Sun Jun 23 01:32:50 2013] fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_src8.ximg exists
[Sun Jun 23 01:32:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_src8.csv
[Sun Jun 23 01:32:50 2013] fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Jun 23 01:32:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_src8.csv
[Sun Jun 23 01:32:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 01:32:50 2013] fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Jun 23 01:32:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Jun 23 01:32:50 2013] fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Jun 23 01:32:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Jun 23 01:32:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 01:33:02 2013] Warning, spatial fit 8 centroid is now closest to src. 11
[Sun Jun 23 01:33:02 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 01:33:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 01:33:02 2013] Assessing source extent using major
[Sun Jun 23 01:33:02 2013] Source does appear to be extended
[Sun Jun 23 01:33:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 02:19:38 2013] Using EEF radius (= 13.89 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 02:19:38 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 23 02:19:38 2013] Initial guess for spatial extent in simple fitting = 13.89"
[Sun Jun 23 02:19:38 2013] source mask rpix=3.2, npix_max = 54, mask sum = 52, frac = 0.953
[Sun Jun 23 02:19:38 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 13.89"
[Sun Jun 23 02:55:23 2013] fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_src8.ximg exists
[Sun Jun 23 02:55:23 2013] fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun Jun 23 02:55:23 2013] Fit fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_src8 appears to have run properly
[Sun Jun 23 02:55:23 2013] fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun Jun 23 02:55:23 2013] fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Jun 23 02:55:23 2013] Fit fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Sun Jun 23 02:55:36 2013] Spatial fit model total counts = 318.575000, observed total counts = 296.000000
[Sun Jun 23 02:55:36 2013] Offset between fit and detection position for source 12 = 1.289367 pixels
[Sun Jun 23 02:55:36 2013] 320.893100 total counts/ 247.324000 bgd. counts: snr = 4.678023
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 1.289367 pixels
  Position = (399.4, 477.5) = 0 2 49.43 70 31 8.9
  Extent = 14.9 (10.2-22.9)", rotation angle = 24 (16-30) degrees
  Source counts = 73.6 +/- 17.9
  Background counts = 247.3
  Rate = 0.003 +/- 0.0008
[Sun Jun 23 02:55:36 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 02:55:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 02:55:36 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 02:55:36 2013] Source does appear to be extended
[Sun Jun 23 02:55:36 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.46
[Sun Jun 23 02:55:36 2013] Source is asymmetric
[Sun Jun 23 02:55:36 2013] Source is confused with source 11
[Sun Jun 23 03:42:31 2013] XMMSAS src. selection expression = ellipse(34701.996200, 41492.192098, 894.600026, 208.327206, 23.528700, X, Y)
[Sun Jun 23 03:42:31 2013] Writing source region out to fullrun_mos2_xmm0550450101_pi300-10000_pass1_cl_src12_src.reg
[Sun Jun 23 03:42:31 2013] Extracting stamp from image fullrun_mos2_xmm0550450101_pi300-10000_cl_sm2.00.img.gz, (348, 426) - (451, 529)
[Sun Jun 23 03:42:31 2013] XMMSAS bgd. selection expression = annulus(34701.996200, 41492.192098, 1491.000043, 2982.000086, X, Y) && !ellipse(33766.935486, 42380.283295, 1740.000000, 1740.000000, 0.000000, X, Y)
[Sun Jun 23 03:42:31 2013] Writing fullrun_mos2_xmm0550450101_pi300-10000_pass1_cl_src12.gif
[Sun Jun 23 03:49:06 2013] Mean detx,y = (-2790.59, 15778.77) 
[Sun Jun 23 03:49:08 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 03:49:33 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 03:49:33 2013] Setting source spectrum file to fullrun_mos2_xmm0550450101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Jun 23 03:49:33 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550450101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sun Jun 23 04:04:42 2013] Not generating rmf since there are only 73 counts
[Sun Jun 23 04:04:42 2013] rmf not generated due to insufficient counts
[Sun Jun 23 04:08:03 2013] Updating aperture counts using extracted products
[Sun Jun 23 04:08:03 2013] Total counts from fullrun_mos2_xmm0550450101_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 100.00
[Sun Jun 23 04:08:04 2013] Total counts from fullrun_mos2_xmm0550450101_pi300-10000_pass1_cl_src12_bgd.pi.gz = 974.00
[Sun Jun 23 04:08:04 2013] Got source and background scale factors 506708.000000, 9117445.000000
[Sun Jun 23 04:08:04 2013] User source parameters:
  Position = (399.4, 477.5) = 0 2 49.43 70 31 8.9
  Extent = 14.9 (10.2-22.9)", rotation angle = 24 (16-30) degrees
  Source aperture counts = 45.9 +/- 11.0
  Background aperture counts = 54.1
  Rate = 0.002 +/- 0.0005

[Sun Jun 23 04:08:07 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 04:08:07 2013] Using photon index=1.80, rate=0.00327, arf fullrun_mos2_xmm0550450101_pi300-10000_pass1_cl_src12.arf
[Sun Jun 23 04:08:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 04:08:07 2013] Updating source flux to 1.6e-13
[Sun Jun 23 04:08:13 2013] Flag c found in src. 12 procflags, skipping spectral fitting
[Sun Jun 23 04:08:13 2013] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 23 04:08:15 2013] xmm0550450101/analysis//spectral/fullrun_mos2_xmm0550450101_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete