[Sun Jun 23 00:19:07 2013] Detection parameters:
  Position = (388.7, 487.7) = 0 2 58.73 70 31 49.4
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 27.7 +/- 8.0
  Background counts = 42.7
  Rate = 0.001 +/- 0.0004

[Sun Jun 23 00:19:08 2013] Off-axis axis estimate = 15.20'
[Sun Jun 23 00:57:50 2013] Using EEF radius (= 14.03 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 00:57:50 2013] Initial guess for spatial extent in simple fitting = 14.03"
[Sun Jun 23 00:57:50 2013] source mask rpix=3.2, npix_max = 55, mask sum = 43, frac = 0.775
[Sun Jun 23 00:57:50 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 14.03"
[Sun Jun 23 01:32:50 2013] fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_src18.ximg exists
[Sun Jun 23 01:32:50 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_src18.csv
[Sun Jun 23 01:32:50 2013] fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_src18_1.ximg exists
[Sun Jun 23 01:32:50 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_src18.csv
[Sun Jun 23 01:32:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 01:32:50 2013] fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sun Jun 23 01:32:50 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Jun 23 01:32:50 2013] fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Jun 23 01:32:50 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Jun 23 01:32:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 01:33:02 2013] Source 11 is offset by 0.954178 and -2.583847 pixels which is larger than
2 X fitted extent = 1.596377 x 1.596377, not incorporating fit results
[Sun Jun 23 01:33:02 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 18.953190 pixels away
[Sun Jun 23 01:33:02 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 01:33:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 01:33:02 2013] Assessing source extent using major
[Sun Jun 23 01:33:02 2013] Source does appear to be extended
[Sun Jun 23 01:33:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 02:19:38 2013] Using EEF radius (= 14.03 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 02:19:38 2013] Initial guess for spatial extent in simple fitting = 14.03"
[Sun Jun 23 02:19:38 2013] source mask rpix=3.2, npix_max = 55, mask sum = 43, frac = 0.775
[Sun Jun 23 02:19:38 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 14.03"
[Sun Jun 23 02:55:23 2013] fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_src17.ximg exists
[Sun Jun 23 02:55:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_src17.csv
[Sun Jun 23 02:55:23 2013] fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_src17_1.ximg exists
[Sun Jun 23 02:55:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_src17.csv
[Sun Jun 23 02:55:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 02:55:23 2013] fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sun Jun 23 02:55:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sun Jun 23 02:55:23 2013] fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sun Jun 23 02:55:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sun Jun 23 02:55:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 02:55:36 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 11.965859 pixels away
[Sun Jun 23 02:55:36 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 02:55:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 02:55:36 2013] Assessing source extent using major
[Sun Jun 23 02:55:36 2013] Source does appear to be extended
[Sun Jun 23 02:55:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 02:55:36 2013] Source is confused with source 12
[Sun Jun 23 03:42:31 2013] XMMSAS src. selection expression = ellipse(33766.935486, 42380.283295, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun 23 03:42:31 2013] Writing source region out to fullrun_mos2_xmm0550450101_pi300-10000_pass1_cl_src11_src.reg
[Sun Jun 23 03:42:31 2013] Extracting stamp from image fullrun_mos2_xmm0550450101_pi300-10000_cl_sm2.00.img.gz, (314, 413) - (464, 563)
[Sun Jun 23 03:42:31 2013] XMMSAS bgd. selection expression = annulus(33766.935486, 42380.283295, 2175.000000, 4350.000000, X, Y) && !ellipse(34701.996200, 41492.192098, 1192.800034, 277.769608, 23.528700, X, Y)
[Sun Jun 23 03:42:31 2013] Writing fullrun_mos2_xmm0550450101_pi300-10000_pass1_cl_src11.gif
[Sun Jun 23 03:53:36 2013] Mean detx,y = (-1600.87, 16008.47) 
[Sun Jun 23 03:53:38 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 03:54:35 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 03:54:35 2013] Setting source spectrum file to fullrun_mos2_xmm0550450101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Jun 23 03:54:35 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550450101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Jun 23 04:06:23 2013] Not generating rmf since there are only 27 counts
[Sun Jun 23 04:06:23 2013] rmf not generated due to insufficient counts
[Sun Jun 23 04:08:06 2013] Updating aperture counts using extracted products
[Sun Jun 23 04:08:06 2013] Total counts from fullrun_mos2_xmm0550450101_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 368.00
[Sun Jun 23 04:08:06 2013] Total counts from fullrun_mos2_xmm0550450101_pi300-10000_pass1_cl_src11_bgd.pi.gz = 1803.00
[Sun Jun 23 04:08:06 2013] Got source and background scale factors 3068004.000000, 20850644.000000
[Sun Jun 23 04:08:06 2013] User source parameters:
  Position = (388.7, 487.7) = 0 2 58.73 70 31 49.4
  Extent = 21.7" x 21.7", rotation angle = 0
  Source aperture counts = 102.7 +/- 20.2
  Background aperture counts = 265.3
  Rate = 0.005 +/- 0.0009

[Sun Jun 23 04:08:06 2013] Updating counts from extracted products
[Sun Jun 23 04:08:06 2013] Set source signif. to 102.70/16.29 = 6.31
[Sun Jun 23 04:08:07 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 04:08:07 2013] Using photon index=1.80, rate=0.00457, arf fullrun_mos2_xmm0550450101_pi300-10000_pass1_cl_src11.arf
[Sun Jun 23 04:08:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 04:08:07 2013] Updating source flux to 2.3e-13
[Sun Jun 23 04:08:13 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 04:08:15 2013] xmm0550450101/analysis//spectral/fullrun_mos2_xmm0550450101_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete