[Sun Jun 23 00:19:07 2013] Detection parameters:
  Position = (316.2, 314.0) = 0 4 1.95 70 19 18.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3286.9 +/- 68.4
  Background counts = 12.2
  Rate = 0.2 +/- 0.003

[Sun Jun 23 00:19:08 2013] Off-axis axis estimate = 1.71'
[Sun Jun 23 00:57:50 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 00:57:50 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Sun Jun 23 00:57:50 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Sun Jun 23 00:57:50 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sun Jun 23 01:32:50 2013] fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun 23 01:32:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_src1.csv
[Sun Jun 23 01:32:50 2013] fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun 23 01:32:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_src1.csv
[Sun Jun 23 01:32:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 01:32:50 2013] fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun 23 01:32:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun 23 01:32:50 2013] fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun 23 01:32:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun 23 01:32:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550450101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 01:33:02 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.108343 pixels away
[Sun Jun 23 01:33:02 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 01:33:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 01:33:02 2013] Assessing source extent using major
[Sun Jun 23 01:33:02 2013] Source does appear to be extended
[Sun Jun 23 01:33:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 02:19:38 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 02:19:38 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Sun Jun 23 02:19:38 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Sun Jun 23 02:19:38 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.28"
[Sun Jun 23 02:55:23 2013] fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun 23 02:55:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_src1.csv
[Sun Jun 23 02:55:23 2013] fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun 23 02:55:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_src1.csv
[Sun Jun 23 02:55:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 02:55:23 2013] fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun 23 02:55:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun 23 02:55:23 2013] fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun 23 02:55:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun 23 02:55:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550450101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 02:55:36 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.108343 pixels away
[Sun Jun 23 02:55:36 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 02:55:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 02:55:36 2013] Assessing source extent using major
[Sun Jun 23 02:55:36 2013] Source does appear to be extended
[Sun Jun 23 02:55:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 03:42:31 2013] Counts = 3286.943848, rescaling region sizes by 2.000000
[Sun Jun 23 03:42:31 2013] XMMSAS src. selection expression = ellipse(27460.715210, 27265.663483, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun 23 03:42:31 2013] Writing source region out to fullrun_mos2_xmm0550450101_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 23 03:42:31 2013] Extracting stamp from image fullrun_mos2_xmm0550450101_pi300-10000_cl_sm2.00.img.gz, (241, 239) - (391, 389)
[Sun Jun 23 03:42:31 2013] XMMSAS bgd. selection expression = annulus(27460.715210, 27265.663483, 4350.000000, 8700.000000, X, Y) && !ellipse(20155.358920, 31492.573400, 462.767939, 462.767939, 0.000000, X, Y) && !ellipse(27677.724030, 35819.910339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24412.026180, 28499.446200, 340.863210, 340.863210, 0.000000, X, Y) && !ellipse(25268.162811, 24572.797363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19250.933182, 18560.573792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17938.183151, 17964.669724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22215.549515, 21293.429962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31662.997345, 33786.704834, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(35549.280548, 20992.673553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30010.007965, 34845.111023, 1740.000000, 1740.000000, 0.000000, X, Y)
[Sun Jun 23 03:42:31 2013] Writing fullrun_mos2_xmm0550450101_pi300-10000_pass1_cl_src1.gif
[Sun Jun 23 03:42:37 2013] Mean detx,y = (128.83, 99.19) 
[Sun Jun 23 03:42:40 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 03:46:50 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 03:46:51 2013] Setting source spectrum file to fullrun_mos2_xmm0550450101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 23 03:46:51 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550450101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 23 03:55:37 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 03:55:37 2013] rmf not generated due to insufficient counts
[Sun Jun 23 04:08:01 2013] Updating aperture counts using extracted products
[Sun Jun 23 04:08:01 2013] Total counts from fullrun_mos2_xmm0550450101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 3407.00
[Sun Jun 23 04:08:01 2013] Total counts from fullrun_mos2_xmm0550450101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 8582.00
[Sun Jun 23 04:08:01 2013] Got source and background scale factors 4999272.000000, 150085220.000000
[Sun Jun 23 04:08:01 2013] User source parameters:
  Position = (316.2, 314.0) = 0 4 1.95 70 19 18.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 3121.1 +/- 59.4
  Background aperture counts = 285.9
  Rate = 0.1 +/- 0.003

[Sun Jun 23 04:08:01 2013] Updating counts from extracted products
[Sun Jun 23 04:08:01 2013] Set source signif. to 3121.14/16.91 = 184.60
[Sun Jun 23 04:08:07 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 04:08:07 2013] Using photon index=1.80, rate=0.139, arf fullrun_mos2_xmm0550450101_pi300-10000_pass1_cl_src1.arf
[Sun Jun 23 04:08:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 04:08:07 2013] Updating source flux to 1.7e-12
[Sun Jun 23 04:08:13 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 04:08:15 2013] xmm0550450101/analysis//spectral/fullrun_mos2_xmm0550450101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete