[Thu Jun 21 13:00:59 2012] Detection parameters:
  Position = (271.0, 505.1) = 6 34 6.57 17 59 49.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.1 +/- 12.3
  Background counts = 29.8
  Rate = 0.004 +/- 0.0006

[Thu Jun 21 13:00:59 2012] Off-axis axis estimate = 15.12'
[Thu Jun 21 13:11:50 2012] Using EEF radius (= 13.99 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 13:11:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 21 13:11:50 2012] Initial guess for spatial extent in simple fitting = 13.99"
[Thu Jun 21 13:11:50 2012] source mask rpix=3.2, npix_max = 55, mask sum = 48, frac = 0.869
[Thu Jun 21 13:11:50 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 13.99"
[Thu Jun 21 13:25:15 2012] fullrun_mos2_xmm0550410301_pi300-10000_cl_pass0_src6.ximg exists
[Thu Jun 21 13:25:15 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550410301_pi300-10000_cl_pass0_src6.csv
[Thu Jun 21 13:25:15 2012] fullrun_mos2_xmm0550410301_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Jun 21 13:25:15 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550410301_pi300-10000_cl_pass0_src6.csv
[Thu Jun 21 13:25:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550410301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550410301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 13:25:15 2012] fullrun_mos2_xmm0550410301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Jun 21 13:25:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550410301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jun 21 13:25:15 2012] fullrun_mos2_xmm0550410301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Jun 21 13:25:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550410301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jun 21 13:25:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550410301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550410301_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 13:25:20 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 18.316082 pixels away
[Thu Jun 21 13:25:20 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 13:25:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 13:25:20 2012] Assessing source extent using major
[Thu Jun 21 13:25:20 2012] Source does appear to be extended
[Thu Jun 21 13:25:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 13:31:11 2012] Using EEF radius (= 13.99 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 13:31:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 21 13:31:11 2012] Initial guess for spatial extent in simple fitting = 13.99"
[Thu Jun 21 13:31:11 2012] source mask rpix=3.2, npix_max = 55, mask sum = 48, frac = 0.869
[Thu Jun 21 13:31:11 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 13.99"
[Thu Jun 21 13:41:26 2012] fullrun_mos2_xmm0550410301_pi300-10000_cl_pass1_src6.ximg exists
[Thu Jun 21 13:41:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550410301_pi300-10000_cl_pass1_src6.csv
[Thu Jun 21 13:41:26 2012] fullrun_mos2_xmm0550410301_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Jun 21 13:41:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550410301_pi300-10000_cl_pass1_src6.csv
[Thu Jun 21 13:41:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550410301_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550410301_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 13:41:26 2012] fullrun_mos2_xmm0550410301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Jun 21 13:41:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550410301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Jun 21 13:41:26 2012] fullrun_mos2_xmm0550410301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Jun 21 13:41:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550410301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Jun 21 13:41:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550410301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550410301_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 13:41:32 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 17.384825 pixels away
[Thu Jun 21 13:41:32 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 13:41:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 13:41:32 2012] Assessing source extent using major
[Thu Jun 21 13:41:32 2012] Source does appear to be extended
[Thu Jun 21 13:41:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 13:53:33 2012] XMMSAS src. selection expression = ellipse(23530.313385, 43898.973328, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 21 13:53:33 2012] Writing source region out to fullrun_mos2_xmm0550410301_pi300-10000_pass1_cl_src6_src.reg
[Thu Jun 21 13:53:33 2012] Extracting stamp from image fullrun_mos2_xmm0550410301_pi300-10000_cl_sm2.00.img.gz, (234, 468) - (309, 543)
[Thu Jun 21 13:53:33 2012] XMMSAS bgd. selection expression = annulus(23530.313385, 43898.973328, 1087.500000, 2175.000000, X, Y)
[Thu Jun 21 13:53:33 2012] Writing fullrun_mos2_xmm0550410301_pi300-10000_pass1_cl_src6.gif
[Thu Jun 21 13:58:42 2012] Mean detx,y = (3147.90, 16330.28) 
[Thu Jun 21 13:58:45 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 13:59:13 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 13:59:14 2012] Setting source spectrum file to fullrun_mos2_xmm0550410301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Jun 21 13:59:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550410301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Jun 21 14:00:21 2012] Not generating rmf since there are only 87 counts
[Thu Jun 21 14:00:21 2012] rmf not generated due to insufficient counts
[Thu Jun 21 14:00:51 2012] Updating aperture counts using extracted products
[Thu Jun 21 14:00:51 2012] Error reading totcts from fullrun_mos2_xmm0550410301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Jun 21 14:00:52 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 14:00:52 2012] Using photon index=1.80, rate=0.00423, arf fullrun_mos2_xmm0550410301_pi300-10000_pass1_cl_src6.arf
[Thu Jun 21 14:00:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 14:00:52 2012] Updating source flux to 2.2e-13
[Thu Jun 21 14:01:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 21 14:01:08 2012] xmm0550410301/analysis//spectral/fullrun_mos2_xmm0550410301_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete