[Thu Jun 21 13:00:59 2012] Detection parameters:
  Position = (416.3, 222.0) = 6 33 22.35 17 39 12.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.5 +/- 12.3
  Background counts = 38.4
  Rate = 0.005 +/- 0.001

[Thu Jun 21 13:00:59 2012] Off-axis axis estimate = 10.18'
[Thu Jun 21 13:11:50 2012] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 13:11:50 2012] Initial guess for spatial extent in simple fitting = 11.52"
[Thu Jun 21 13:11:50 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.908
[Thu Jun 21 13:11:50 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.52"
[Thu Jun 21 13:25:15 2012] fullrun_mos2_xmm0550410301_pi300-10000_cl_pass0_src5.ximg exists
[Thu Jun 21 13:25:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550410301_pi300-10000_cl_pass0_src5.csv
[Thu Jun 21 13:25:15 2012] fullrun_mos2_xmm0550410301_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Jun 21 13:25:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550410301_pi300-10000_cl_pass0_src5.csv
[Thu Jun 21 13:25:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550410301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550410301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 13:25:15 2012] fullrun_mos2_xmm0550410301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Jun 21 13:25:15 2012] fullrun_mos2_xmm0550410301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jun 21 13:25:15 2012] Fit fullrun_mos2_xmm0550410301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Jun 21 13:25:20 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 11.088886 pixels away
[Thu Jun 21 13:25:20 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 13:25:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 13:25:20 2012] Assessing source extent using major
[Thu Jun 21 13:25:20 2012] Source does appear to be extended
[Thu Jun 21 13:25:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 13:31:11 2012] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 13:31:11 2012] Initial guess for spatial extent in simple fitting = 11.52"
[Thu Jun 21 13:31:11 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.908
[Thu Jun 21 13:31:11 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.52"
[Thu Jun 21 13:41:26 2012] fullrun_mos2_xmm0550410301_pi300-10000_cl_pass1_src5.ximg exists
[Thu Jun 21 13:41:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550410301_pi300-10000_cl_pass1_src5.csv
[Thu Jun 21 13:41:26 2012] fullrun_mos2_xmm0550410301_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Jun 21 13:41:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550410301_pi300-10000_cl_pass1_src5.csv
[Thu Jun 21 13:41:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550410301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550410301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 13:41:26 2012] fullrun_mos2_xmm0550410301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Jun 21 13:41:26 2012] fullrun_mos2_xmm0550410301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jun 21 13:41:26 2012] Fit fullrun_mos2_xmm0550410301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Jun 21 13:41:32 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.074233 pixels away
[Thu Jun 21 13:41:32 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 13:41:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 13:41:32 2012] Assessing source extent using major
[Thu Jun 21 13:41:32 2012] Source does appear to be extended
[Thu Jun 21 13:41:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 13:53:33 2012] XMMSAS src. selection expression = ellipse(36167.660767, 19265.103073, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 21 13:53:33 2012] Writing source region out to fullrun_mos2_xmm0550410301_pi300-10000_pass1_cl_src5_src.reg
[Thu Jun 21 13:53:33 2012] Extracting stamp from image fullrun_mos2_xmm0550410301_pi300-10000_cl_sm2.00.img.gz, (379, 184) - (454, 259)
[Thu Jun 21 13:53:33 2012] XMMSAS bgd. selection expression = annulus(36167.660767, 19265.103073, 1087.500000, 2175.000000, X, Y)
[Thu Jun 21 13:53:33 2012] Writing fullrun_mos2_xmm0550410301_pi300-10000_pass1_cl_src5.gif
[Thu Jun 21 13:58:13 2012] Mean detx,y = (-8860.83, -8513.99) 
[Thu Jun 21 13:58:15 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 13:58:37 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 13:58:37 2012] Setting source spectrum file to fullrun_mos2_xmm0550410301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jun 21 13:58:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550410301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Jun 21 14:00:16 2012] Not generating rmf since there are only 51 counts
[Thu Jun 21 14:00:16 2012] rmf not generated due to insufficient counts
[Thu Jun 21 14:00:51 2012] Updating aperture counts using extracted products
[Thu Jun 21 14:00:51 2012] Error reading totcts from fullrun_mos2_xmm0550410301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jun 21 14:00:52 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 14:00:52 2012] Using photon index=1.80, rate=0.00455, arf fullrun_mos2_xmm0550410301_pi300-10000_pass1_cl_src5.arf
[Thu Jun 21 14:00:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 14:00:52 2012] Updating source flux to 8.6e-14
[Thu Jun 21 14:01:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 21 14:01:08 2012] xmm0550410301/analysis//spectral/fullrun_mos2_xmm0550410301_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete