[Mon Jun 10 19:06:47 2013] Detection parameters:
  Position = (218.2, 343.2) = 6 34 15.21 17 51 1.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.5 +/- 13.3
  Background counts = 8.6
  Rate = 0.007 +/- 0.0009

[Mon Jun 10 19:06:47 2013] Off-axis axis estimate = 6.66'
[Mon Jun 10 19:06:56 2013] Using EEF radius (= 9.76 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:06:56 2013] Initial guess for spatial extent in simple fitting = 9.76"
[Mon Jun 10 19:06:56 2013] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.196
[Mon Jun 10 19:06:56 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 9.76"
[Mon Jun 10 19:06:56 2013] fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jun 10 19:06:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_src3.csv
[Mon Jun 10 19:06:56 2013] fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jun 10 19:06:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_src3.csv
[Mon Jun 10 19:06:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:06:57 2013] fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun 10 19:06:57 2013] fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun 10 19:06:57 2013] Fit fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Jun 10 19:07:01 2013] Spatial fit model total counts = 189.503000, observed total counts = 183.000000
[Mon Jun 10 19:07:01 2013] Offset between fit and detection position for source 5 = 0.066917 pixels
[Mon Jun 10 19:07:01 2013] 189.624400 total counts/ 118.303000 bgd. counts: snr = 6.557254
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.066917 pixels
  Position = (218.2, 343.2) = 6 34 15.21 17 51 1.0
  Extent = 4.1 (3.5-5.1)", rotation angle = 0
  Source counts = 71.3 +/- 13.8
  Background counts = 118.3
  Rate = 0.003 +/- 0.0007
[Mon Jun 10 19:07:01 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:07:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:07:01 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:07:01 2013] Source does appear to be extended
[Mon Jun 10 19:07:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:07:06 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:07:06 2013] Initial guess for spatial extent in simple fitting = 4.14"
[Mon Jun 10 19:07:06 2013] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.067
[Mon Jun 10 19:07:06 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 4.14"
[Mon Jun 10 19:07:07 2013] fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jun 10 19:07:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_src3.csv
[Mon Jun 10 19:07:07 2013] fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jun 10 19:07:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_src3.csv
[Mon Jun 10 19:07:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:07:07 2013] fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jun 10 19:07:07 2013] fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jun 10 19:07:07 2013] Fit fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Jun 10 19:07:10 2013] Spatial fit model total counts = 189.504000, observed total counts = 183.000000
[Mon Jun 10 19:07:10 2013] Offset between fit and detection position for source 5 = 0.000001 pixels
[Mon Jun 10 19:07:10 2013] 189.624700 total counts/ 118.303000 bgd. counts: snr = 6.557281
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.000001 pixels
  Position = (218.2, 343.2) = 6 34 15.21 17 51 1.0
  Extent = 4.1 (3.5-5.1)", rotation angle = 0
  Source counts = 71.3 +/- 13.8
  Background counts = 118.3
  Rate = 0.003 +/- 0.0007
[Mon Jun 10 19:07:10 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:07:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:07:10 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:07:10 2013] Source does appear to be extended
[Mon Jun 10 19:07:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:11:53 2013] XMMSAS src. selection expression = ellipse(18935.650320, 29811.475200, 248.521741, 248.521741, 0.000000, X, Y)
[Mon Jun 10 19:11:53 2013] Not overwriting source region fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src5_src.reg
[Mon Jun 10 19:11:53 2013] Extracting stamp from image fullrun_mos2_xmm0550410201_pi300-10000_cl_sm2.00.img.gz, (204, 329) - (232, 358)
[Mon Jun 10 19:11:53 2013] XMMSAS bgd. selection expression = annulus(18935.650320, 29811.475200, 414.202901, 828.405803, X, Y)
[Mon Jun 10 19:11:53 2013] Writing fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src5.gif
[Mon Jun 10 19:11:54 2013] ../../xmm0550410201/products/events/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0550410201/products/events/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Mon Jun 10 19:11:54 2013] Mean detx,y = (-5552.24, -5925.83) 
[Mon Jun 10 19:11:54 2013] ../../xmm0550410201/products/images/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src5_src.img and ../../xmm0550410201/products/images/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Mon Jun 10 19:11:54 2013] ../../xmm0550410201/products/spectra/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0550410201/products/spectra/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Mon Jun 10 19:11:54 2013] Setting source spectrum file to fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jun 10 19:11:54 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Jun 10 19:11:54 2013] ../../xmm0550410201/products/lightcurves/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0550410201/products/lightcurves/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create
[Mon Jun 10 19:11:54 2013] Not generating rmf since there are only 71 counts
[Mon Jun 10 19:11:54 2013] rmf not generated due to insufficient counts
[Mon Jun 10 19:11:54 2013] fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src5.arf exists, delete to re-create
[Mon Jun 10 19:12:09 2013] Updating aperture counts using extracted products
[Mon Jun 10 19:12:09 2013] Total counts from fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 82.00
[Mon Jun 10 19:12:09 2013] Total counts from fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src5_bgd.pi.gz = 73.00
[Mon Jun 10 19:12:09 2013] Got source and background scale factors 196800.000000, 1493540.000000
[Mon Jun 10 19:12:09 2013] User source parameters:
  Position = (218.2, 343.2) = 6 34 15.21 17 51 1.0
  Extent = 4.1 (3.5-5.1)", rotation angle = 0
  Source aperture counts = 72.4 +/- 10.1
  Background aperture counts = 9.6
  Rate = 0.003 +/- 0.0005

[Mon Jun 10 19:12:10 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 19:12:10 2013] Using photon index=1.80, rate=0.00341, arf fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src5.arf
[Mon Jun 10 19:12:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 19:12:10 2013] Updating source flux to 8.5e-14
[Mon Jun 10 19:12:12 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 19:12:14 2013] xmm0550410201/analysis//spectral/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete