[Mon Jun 10 19:06:46 2013] Detection parameters:
  Position = (338.4, 461.4) = 6 33 38.59 17 59 35.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.0 +/- 9.2
  Background counts = 7.3
  Rate = 0.002 +/- 0.0004

[Mon Jun 10 19:06:47 2013] Off-axis axis estimate = 12.16'
[Mon Jun 10 19:06:56 2013] Using EEF radius (= 12.51 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:06:56 2013] Initial guess for spatial extent in simple fitting = 12.51"
[Mon Jun 10 19:06:56 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.075
[Mon Jun 10 19:06:56 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 12.51"
[Mon Jun 10 19:06:57 2013] fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_src8.ximg exists
[Mon Jun 10 19:06:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_src8.csv
[Mon Jun 10 19:06:57 2013] fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_src8_1.ximg exists
[Mon Jun 10 19:06:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_src8.csv
[Mon Jun 10 19:06:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:06:57 2013] fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Mon Jun 10 19:06:57 2013] fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Mon Jun 10 19:06:57 2013] Fit fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Mon Jun 10 19:07:01 2013] Spatial fit model total counts = 133.176000, observed total counts = 129.000000
[Mon Jun 10 19:07:01 2013] Offset between fit and detection position for source 4 = 0.284306 pixels
[Mon Jun 10 19:07:01 2013] 135.615800 total counts/ 104.209000 bgd. counts: snr = 3.076600
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.284306 pixels
  Position = (338.1, 461.3) = 6 33 38.68 17 59 34.8
  Extent = 6.8 (4.6-9.3)", rotation angle = 0
  Source counts = 31.4 +/- 11.6
  Background counts = 104.2
  Rate = 0.002 +/- 0.0006
[Mon Jun 10 19:07:01 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:07:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:07:01 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:07:01 2013] Source does appear to be extended
[Mon Jun 10 19:07:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:07:06 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:07:06 2013] Initial guess for spatial extent in simple fitting = 6.78"
[Mon Jun 10 19:07:06 2013] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.943
[Mon Jun 10 19:07:06 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 6.78"
[Mon Jun 10 19:07:07 2013] fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_src8.ximg exists
[Mon Jun 10 19:07:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_src8.csv
[Mon Jun 10 19:07:07 2013] fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_src8_1.ximg exists
[Mon Jun 10 19:07:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_src8.csv
[Mon Jun 10 19:07:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:07:07 2013] fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Mon Jun 10 19:07:07 2013] fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Mon Jun 10 19:07:07 2013] Fit fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Mon Jun 10 19:07:10 2013] Spatial fit model total counts = 111.970000, observed total counts = 110.000000
[Mon Jun 10 19:07:10 2013] Offset between fit and detection position for source 4 = 0.080686 pixels
[Mon Jun 10 19:07:10 2013] 112.730500 total counts/ 80.362500 bgd. counts: snr = 3.610681
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.080686 pixels
  Position = (338.2, 461.3) = 6 33 38.65 17 59 34.7
  Extent = 6.7 (4.7-9.4)", rotation angle = 0
  Source counts = 32.4 +/- 10.6
  Background counts = 80.4
  Rate = 0.002 +/- 0.0005
[Mon Jun 10 19:07:10 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:07:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:07:10 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:07:10 2013] Source does appear to be extended
[Mon Jun 10 19:07:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:11:53 2013] XMMSAS src. selection expression = ellipse(29372.830000, 40084.626200, 403.112412, 403.112412, 0.000000, X, Y)
[Mon Jun 10 19:11:53 2013] Not overwriting source region fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src4_src.reg
[Mon Jun 10 19:11:53 2013] Extracting stamp from image fullrun_mos2_xmm0550410201_pi300-10000_cl_sm2.00.img.gz, (315, 438) - (361, 484)
[Mon Jun 10 19:11:53 2013] XMMSAS bgd. selection expression = annulus(29372.830000, 40084.626200, 671.854019, 1343.708039, X, Y)
[Mon Jun 10 19:11:53 2013] Writing fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src4.gif
[Mon Jun 10 19:11:54 2013] ../../xmm0550410201/products/events/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src4_src.evt and ../../xmm0550410201/products/events/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src4_bgd.evt exist, delete to re-create
[Mon Jun 10 19:11:54 2013] Mean detx,y = (5467.53, -15576.98) 
[Mon Jun 10 19:11:54 2013] ../../xmm0550410201/products/images/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src4_src.img and ../../xmm0550410201/products/images/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src4_bgd.img exist, delete to re-create
[Mon Jun 10 19:11:54 2013] ../../xmm0550410201/products/spectra/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src4_src_b10.pi.gz and ../../xmm0550410201/products/spectra/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src4_bgd.pi exist, delete to re-create
[Mon Jun 10 19:11:54 2013] Setting source spectrum file to fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Jun 10 19:11:54 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Jun 10 19:11:54 2013] ../../xmm0550410201/products/lightcurves/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src4_src.lc and ../../xmm0550410201/products/lightcurves/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src4_bgd.lc exist, delete to re-create
[Mon Jun 10 19:11:54 2013] Not generating rmf since there are only 32 counts
[Mon Jun 10 19:11:54 2013] rmf not generated due to insufficient counts
[Mon Jun 10 19:11:54 2013] fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src4.arf exists, delete to re-create
[Mon Jun 10 19:12:10 2013] Updating aperture counts using extracted products
[Mon Jun 10 19:12:10 2013] Total counts from fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 53.00
[Mon Jun 10 19:12:10 2013] Total counts from fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src4_bgd.pi.gz = 129.00
[Mon Jun 10 19:12:10 2013] Got source and background scale factors 513600.000000, 3355581.000000
[Mon Jun 10 19:12:10 2013] User source parameters:
  Position = (338.2, 461.3) = 6 33 38.65 17 59 34.7
  Extent = 6.7 (4.7-9.4)", rotation angle = 0
  Source aperture counts = 33.3 +/- 8.3
  Background aperture counts = 19.7
  Rate = 0.002 +/- 0.0004

[Mon Jun 10 19:12:10 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 19:12:10 2013] Using photon index=1.80, rate=0.00155, arf fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src4.arf
[Mon Jun 10 19:12:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 19:12:10 2013] Updating source flux to 6.4e-14
[Mon Jun 10 19:12:12 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 19:12:14 2013] xmm0550410201/analysis//spectral/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete