[Mon Jun 10 19:06:46 2013] Detection parameters:
  Position = (287.1, 277.7) = 6 33 54.23 17 46 15.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1694.7 +/- 49.0
  Background counts = 10.3
  Rate = 0.08 +/- 0.002

[Mon Jun 10 19:06:47 2013] Off-axis axis estimate = 1.71'
[Mon Jun 10 19:06:56 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:06:56 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Mon Jun 10 19:06:56 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Mon Jun 10 19:06:56 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Mon Jun 10 19:06:56 2013] fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 10 19:06:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_src1.csv
[Mon Jun 10 19:06:56 2013] fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 10 19:06:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_src1.csv
[Mon Jun 10 19:06:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:06:57 2013] fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 10 19:06:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 10 19:06:57 2013] fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 10 19:06:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 10 19:06:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550410201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:07:01 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.456618 pixels away
[Mon Jun 10 19:07:01 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:07:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:07:01 2013] Assessing source extent using major
[Mon Jun 10 19:07:01 2013] Source does appear to be extended
[Mon Jun 10 19:07:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:07:06 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:07:06 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Mon Jun 10 19:07:06 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Mon Jun 10 19:07:06 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.28"
[Mon Jun 10 19:07:06 2013] fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 10 19:07:06 2013] fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 10 19:07:07 2013] Fit fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_src1 appears to have run properly
[Mon Jun 10 19:07:07 2013] fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 10 19:07:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun 10 19:07:07 2013] fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 10 19:07:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun 10 19:07:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550410201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:07:10 2013] Spatial fit model total counts = 1670.400000, observed total counts = 1579.000000
[Mon Jun 10 19:07:10 2013] Offset between fit and detection position for source 1 = 0.156824 pixels
[Mon Jun 10 19:07:10 2013] 1653.846000 total counts/ 531.546000 bgd. counts: snr = 48.678651
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.156824 pixels
  Position = (287.2, 277.6) = 6 33 54.21 17 46 15.7
  Extent = 5.1 (4.8-5.5)" x 4.7 (4.4-5.0)", rotation angle = 17
  Source counts = 1122.3 +/- 40.7
  Background counts = 531.5
  Rate = 0.05 +/- 0.002
[Mon Jun 10 19:07:10 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:07:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:07:10 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:07:10 2013] Source does appear to be extended
[Mon Jun 10 19:07:10 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.95
[Mon Jun 10 19:11:53 2013] Counts = 1122.300000, rescaling region sizes by 2.000000
[Mon Jun 10 19:11:53 2013] XMMSAS src. selection expression = ellipse(24933.980720, 24102.688200, 616.039218, 565.192816, 17.223044, X, Y)
[Mon Jun 10 19:11:53 2013] Not overwriting source region fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun 10 19:11:53 2013] Extracting stamp from image fullrun_mos2_xmm0550410201_pi300-10000_cl_sm2.00.img.gz, (252, 242) - (323, 313)
[Mon Jun 10 19:11:53 2013] XMMSAS bgd. selection expression = annulus(24933.980720, 24102.688200, 2053.464059, 4106.928118, X, Y)
[Mon Jun 10 19:11:53 2013] Writing fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src1.gif
[Mon Jun 10 19:11:53 2013] ../../xmm0550410201/products/events/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0550410201/products/events/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Jun 10 19:11:53 2013] Mean detx,y = (103.89, 130.44) 
[Mon Jun 10 19:11:53 2013] ../../xmm0550410201/products/images/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src1_src.img and ../../xmm0550410201/products/images/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Jun 10 19:11:53 2013] ../../xmm0550410201/products/spectra/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0550410201/products/spectra/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Jun 10 19:11:53 2013] Setting source spectrum file to fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 10 19:11:53 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun 10 19:11:53 2013] ../../xmm0550410201/products/lightcurves/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0550410201/products/lightcurves/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Jun 10 19:11:54 2013] fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Mon Jun 10 19:11:54 2013] fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Mon Jun 10 19:12:09 2013] Updating aperture counts using extracted products
[Mon Jun 10 19:12:09 2013] Total counts from fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1479.00
[Mon Jun 10 19:12:09 2013] Total counts from fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1946.00
[Mon Jun 10 19:12:09 2013] Got source and background scale factors 1084908.000000, 38817708.000000
[Mon Jun 10 19:12:09 2013] User source parameters:
  Position = (287.2, 277.6) = 6 33 54.21 17 46 15.7
  Extent = 5.1 (4.8-5.5)" x 4.7 (4.4-5.0)", rotation angle = 17
  Source aperture counts = 1424.6 +/- 39.5
  Background aperture counts = 54.4
  Rate = 0.07 +/- 0.002

[Mon Jun 10 19:12:10 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 19:12:10 2013] Using photon index=1.80, rate=0.0537, arf fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src1.arf
[Mon Jun 10 19:12:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 19:12:10 2013] Updating source flux to 7.6e-13
[Mon Jun 10 19:12:14 2013] xmm0550410201/analysis//spectral/fullrun_mos2_xmm0550410201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete