[Fri Nov 25 21:53:10 2011] Detection parameters:
  Position = (277.6, 337.8) = 15 23 12.88 8 37 39.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 245.8 +/- 34.2
  Background counts = 447.3
  Rate = 0.01 +/- 0.002

[Fri Nov 25 21:53:10 2011] Off-axis axis estimate = 3.23'
[Fri Nov 25 21:56:42 2011] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 21:56:42 2011] Initial guess for spatial extent in simple fitting = 8.04"
[Fri Nov 25 21:56:42 2011] source mask rpix=1.8, npix_max = 22, mask sum = 25, frac = 1.133
[Fri Nov 25 21:56:42 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 8.04"
[Sat Nov 26 01:15:49 2011] fullrun_pn_xmm0550360101_pi300-10000_cl_pass0_src22.ximg exists
[Sat Nov 26 01:15:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550360101_pi300-10000_cl_pass0_src22.csv
[Sat Nov 26 01:15:49 2011] fullrun_pn_xmm0550360101_pi300-10000_cl_pass0_src22_1.ximg exists
[Sat Nov 26 01:15:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550360101_pi300-10000_cl_pass0_src22.csv
[Sat Nov 26 01:15:49 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550360101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550360101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 01:15:50 2011] fullrun_pn_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sat Nov 26 01:15:50 2011] fullrun_pn_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sat Nov 26 01:15:50 2011] Fit fullrun_pn_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Sat Nov 26 04:59:11 2011] Spatial fit model total counts = 5374.370000, observed total counts = 5373.000000
[Sat Nov 26 04:59:11 2011] Offset between fit and detection position for source 28 = 6.906178 pixels
[Sat Nov 26 04:59:11 2011] 5446.568000 total counts/ 4803.920000 bgd. counts: snr = 9.272040
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 6.906178 pixels
  Position = (282.2, 332.7) = 15 23 11.53 8 37 18.2
  Extent = 16.1 (16.1-32.2)", rotation angle = 0
  Source counts = 642.6 +/- 73.8
  Background counts = 4803.9
  Rate = 0.03 +/- 0.003
[Sat Nov 26 04:59:11 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 04:59:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 04:59:11 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 04:59:11 2011] Source does appear to be extended
[Sat Nov 26 04:59:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 04:59:11 2011] Source is confused with source 4
[Sat Nov 26 04:59:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Nov 26 04:59:46 2011] Initial guess for spatial extent in simple fitting = 16.08"
[Sat Nov 26 04:59:46 2011] source mask rpix=3.7, npix_max = 70, mask sum = 72, frac = 1.022
[Sat Nov 26 04:59:46 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 16.08"
[Sat Nov 26 08:04:17 2011] fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_src19.ximg exists
[Sat Nov 26 08:04:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_src19.csv
[Sat Nov 26 08:04:17 2011] fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat Nov 26 08:04:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_src19.csv
[Sat Nov 26 08:04:18 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 08:04:18 2011] fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat Nov 26 08:04:18 2011] fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Nov 26 08:04:18 2011] Fit fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sat Nov 26 10:54:02 2011] Warning, spatial fit 19 centroid is now closest to src. 21
[Sat Nov 26 10:54:02 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 10:54:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 10:54:02 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 10:54:02 2011] Source does appear to be extended
[Sat Nov 26 10:54:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 10:54:36 2011] XMMSAS src. selection expression = ellipse(24506.548000, 28892.190000, 965.088028, 965.088028, 0.000000, X, Y)
[Sat Nov 26 10:54:36 2011] Writing source region out to fullrun_pn_xmm0550360101_pi300-10000_pass1_cl_src28_src.reg
[Sat Nov 26 10:54:36 2011] Extracting stamp from image fullrun_pn_xmm0550360101_pi300-10000_cl_sm2.00.img.gz, (227, 277) - (338, 388)
[Sat Nov 26 10:54:36 2011] XMMSAS bgd. selection expression = annulus(24506.548000, 28892.190000, 1608.480046, 3216.960093, X, Y) && !ellipse(26223.672800, 28032.355600, 1161.928033, 1161.928033, 0.000000, X, Y) && !ellipse(26733.512000, 29608.497760, 1104.480032, 1104.480032, 0.000000, X, Y) && !ellipse(25491.150000, 29254.061200, 1294.088037, 1294.088037, 0.000000, X, Y) && !ellipse(27717.362000, 26456.000000, 1009.296029, 1009.296029, 0.000000, X, Y) && !ellipse(25141.759521, 24951.651459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26988.775787, 31066.513153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26118.764000, 30925.602400, 1346.272039, 927.680027, 62.349300, X, Y) && !ellipse(23892.331940, 30476.103668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25122.886000, 30711.286000, 1005.552029, 1005.552029, 0.000000, X, Y) && !ellipse(25375.710497, 30366.049198, 1311.416038, 775.833573, 58.406711, X, Y) && !ellipse(26514.127600, 30289.188000, 1346.272039, 1346.272039, 0.000000, X, Y) && !ellipse(28125.010000, 30474.910000, 614.756018, 614.756018, 0.000000, X, Y) && !ellipse(23561.262600, 27156.745400, 931.280027, 931.280027, 0.000000, X, Y) && !ellipse(28444.502000, 25631.484000, 2018.208058, 2018.208058, 0.000000, X, Y) && !ellipse(24964.002655, 25733.955841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27854.033905, 25353.062683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28720.836000, 24999.322000, 2493.088072, 2493.088072, 0.000000, X, Y) && !ellipse(27324.955597, 25099.448975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26715.252014, 24935.904480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24135.643800, 24624.858000, 1168.520034, 1168.520034, 0.000000, X, Y)
[Sat Nov 26 10:54:36 2011] Writing fullrun_pn_xmm0550360101_pi300-10000_pass1_cl_src28.gif
[Sat Nov 26 12:10:01 2011] Mean detx,y = (-1100.68, -1839.01) 
[Sat Nov 26 12:10:06 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Nov 26 12:11:10 2011] Binned source spectrum to 10 counts/bin
[Sat Nov 26 12:11:11 2011] Setting source spectrum file to fullrun_pn_xmm0550360101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Nov 26 12:11:11 2011] Setting bgd. spectrum file to fullrun_pn_xmm0550360101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sun Nov 27 04:35:03 2011] Updating aperture counts using extracted products
[Sun Nov 27 04:35:03 2011] Error reading totcts from fullrun_pn_xmm0550360101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sun Nov 27 04:35:06 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 04:35:06 2011] Using photon index=1.80, rate=0.0292, arf fullrun_pn_xmm0550360101_pi300-10000_pass1_cl_src28.arf
[Sun Nov 27 04:35:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 04:35:06 2011] Updating source flux to 8.2e-14
[Sun Nov 27 04:44:34 2011] Flag c found in src. 28 procflags, skipping spectral fitting