[Fri Nov 25 21:53:10 2011] Detection parameters:
  Position = (302.5, 346.1) = 15 23 5.57 8 38 9.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 372.0 +/- 33.7
  Background counts = 415.2
  Rate = 0.03 +/- 0.002

[Fri Nov 25 21:53:10 2011] Off-axis axis estimate = 3.47'
[Fri Nov 25 21:56:42 2011] Using EEF radius (= 8.16 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 21:56:42 2011] Initial guess for spatial extent in simple fitting = 8.16"
[Fri Nov 25 21:56:42 2011] source mask rpix=1.9, npix_max = 22, mask sum = 10, frac = 0.443
[Fri Nov 25 21:56:42 2011] Skipping simple spatial due to low active detector fraction
[Sat Nov 26 04:59:11 2011] Spatial fit model total counts = 4557.810000, observed total counts = 4540.000000
[Sat Nov 26 04:59:11 2011] Offset between fit and detection position for source 25 = 3.816898 pixels
[Sat Nov 26 04:59:11 2011] Warning, changing simple spatial fit ID from -1 to 15
[Sat Nov 26 04:59:11 2011] 4565.588000 total counts/ 3742.980000 bgd. counts: snr = 13.445723
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 3.816898 pixels
  Position = (305.3, 348.7) = 15 23 4.76 8 38 28.1
  Extent = 16.8 (15.3-33.7)", rotation angle = 0
  Source counts = 822.6 +/- 67.6
  Background counts = 3743.0
  Rate = 0.04 +/- 0.003
[Sat Nov 26 04:59:11 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 04:59:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 04:59:11 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 04:59:11 2011] Source does appear to be extended
[Sat Nov 26 04:59:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 04:59:11 2011] Source is confused with source 3
[Sat Nov 26 04:59:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Nov 26 04:59:46 2011] Initial guess for spatial extent in simple fitting = 16.83"
[Sat Nov 26 04:59:46 2011] source mask rpix=3.9, npix_max = 76, mask sum = 75, frac = 0.982
[Sat Nov 26 04:59:46 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 16.83"
[Sat Nov 26 08:04:17 2011] fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_src17.ximg exists
[Sat Nov 26 08:04:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_src17.csv
[Sat Nov 26 08:04:17 2011] fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat Nov 26 08:04:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_src17.csv
[Sat Nov 26 08:04:17 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 08:04:18 2011] fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat Nov 26 08:04:18 2011] fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat Nov 26 08:04:18 2011] Fit fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sat Nov 26 10:54:02 2011] Warning, spatial fit 17 centroid is now closest to src. 21
[Sat Nov 26 10:54:02 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 10:54:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 10:54:02 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 10:54:02 2011] Source does appear to be extended
[Sat Nov 26 10:54:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 10:54:35 2011] XMMSAS src. selection expression = ellipse(26514.127600, 30289.188000, 1009.704029, 1009.704029, 0.000000, X, Y)
[Sat Nov 26 10:54:35 2011] Writing source region out to fullrun_pn_xmm0550360101_pi300-10000_pass1_cl_src25_src.reg
[Sat Nov 26 10:54:35 2011] Extracting stamp from image fullrun_pn_xmm0550360101_pi300-10000_cl_sm2.00.img.gz, (247, 291) - (363, 407)
[Sat Nov 26 10:54:35 2011] XMMSAS bgd. selection expression = annulus(26514.127600, 30289.188000, 1682.840048, 3365.680097, X, Y) && !ellipse(26223.672800, 28032.355600, 1161.928033, 1161.928033, 0.000000, X, Y) && !ellipse(26733.512000, 29608.497760, 1104.480032, 1104.480032, 0.000000, X, Y) && !ellipse(25491.150000, 29254.061200, 1294.088037, 1294.088037, 0.000000, X, Y) && !ellipse(27717.362000, 26456.000000, 1009.296029, 1009.296029, 0.000000, X, Y) && !ellipse(26988.775787, 31066.513153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28725.561341, 30986.287768, 999.456029, 374.978812, 77.789697, X, Y) && !ellipse(26118.764000, 30925.602400, 1346.272039, 927.680027, 62.349300, X, Y) && !ellipse(23892.331940, 30476.103668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25122.886000, 30711.286000, 1005.552029, 1005.552029, 0.000000, X, Y) && !ellipse(25375.710497, 30366.049198, 1311.416038, 775.833573, 58.406711, X, Y) && !ellipse(28125.010000, 30474.910000, 614.756018, 614.756018, 0.000000, X, Y) && !ellipse(24506.548000, 28892.190000, 1286.784037, 1286.784037, 0.000000, X, Y) && !ellipse(30125.368988, 29210.310486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29294.279000, 27630.440000, 1057.472030, 1057.472030, 0.000000, X, Y) && !ellipse(23561.262600, 27156.745400, 931.280027, 931.280027, 0.000000, X, Y) && !ellipse(29010.567322, 26485.966339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28444.502000, 25631.484000, 2018.208058, 2018.208058, 0.000000, X, Y) && !ellipse(28720.836000, 24999.322000, 2493.088072, 2493.088072, 0.000000, X, Y)
[Sat Nov 26 10:54:35 2011] Writing fullrun_pn_xmm0550360101_pi300-10000_pass1_cl_src25.gif
[Sat Nov 26 12:07:29 2011] Mean detx,y = (1234.43, -2222.36) 
[Sat Nov 26 12:07:33 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Nov 26 12:08:46 2011] Binned source spectrum to 10 counts/bin
[Sat Nov 26 12:08:46 2011] Setting source spectrum file to fullrun_pn_xmm0550360101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Nov 26 12:08:46 2011] Setting bgd. spectrum file to fullrun_pn_xmm0550360101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sun Nov 27 04:35:03 2011] Updating aperture counts using extracted products
[Sun Nov 27 04:35:03 2011] Error reading totcts from fullrun_pn_xmm0550360101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Nov 27 04:35:06 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 04:35:06 2011] Using photon index=1.80, rate=0.0374, arf fullrun_pn_xmm0550360101_pi300-10000_pass1_cl_src25.arf
[Sun Nov 27 04:35:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 04:35:06 2011] Updating source flux to 9.9e-14
[Sun Nov 27 04:44:34 2011] Flag c found in src. 25 procflags, skipping spectral fitting