[Fri Nov 25 21:53:10 2011] Detection parameters:
  Position = (275.2, 350.9) = 15 23 13.60 8 38 40.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 169.2 +/- 30.7
  Background counts = 391.4
  Rate = 0.01 +/- 0.002

[Fri Nov 25 21:53:10 2011] Off-axis axis estimate = 4.16'
[Fri Nov 25 21:56:42 2011] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 21:56:42 2011] Initial guess for spatial extent in simple fitting = 8.51"
[Fri Nov 25 21:56:42 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.036
[Fri Nov 25 21:56:42 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 8.51"
[Sat Nov 26 01:15:49 2011] fullrun_pn_xmm0550360101_pi300-10000_cl_pass0_src16.ximg exists
[Sat Nov 26 01:15:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550360101_pi300-10000_cl_pass0_src16.csv
[Sat Nov 26 01:15:49 2011] fullrun_pn_xmm0550360101_pi300-10000_cl_pass0_src16_1.ximg exists
[Sat Nov 26 01:15:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550360101_pi300-10000_cl_pass0_src16.csv
[Sat Nov 26 01:15:49 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550360101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550360101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 01:15:50 2011] fullrun_pn_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sat Nov 26 01:15:50 2011] fullrun_pn_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sat Nov 26 01:15:50 2011] Fit fullrun_pn_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Sat Nov 26 04:59:11 2011] Source 21 is offset by 7.682873 and 1.978840 pixels which is larger than
2 X fitted extent = 1.178184 x 1.178184, not incorporating fit results
[Sat Nov 26 04:59:11 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 04:59:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 04:59:11 2011] Assessing source extent using major
[Sat Nov 26 04:59:11 2011] Source does appear to be extended
[Sat Nov 26 04:59:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 04:59:46 2011] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 04:59:46 2011] Initial guess for spatial extent in simple fitting = 8.51"
[Sat Nov 26 04:59:46 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.036
[Sat Nov 26 04:59:46 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 8.51"
[Sat Nov 26 08:04:17 2011] fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_src13.ximg exists
[Sat Nov 26 08:04:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_src13.csv
[Sat Nov 26 08:04:17 2011] fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_src13_1.ximg exists
[Sat Nov 26 08:04:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_src13.csv
[Sat Nov 26 08:04:17 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 08:04:18 2011] fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sat Nov 26 08:04:18 2011] fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Nov 26 08:04:18 2011] Fit fullrun_pn_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Nov 26 10:54:02 2011] Source 21 is offset by 0.690054 and 2.317927 pixels which is larger than
2 X fitted extent = 0.977862 x 0.977862, not incorporating fit results
[Sat Nov 26 10:54:02 2011] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 19.947823 pixels away
[Sat Nov 26 10:54:02 2011] Source 21 is offset by 7.972597 and 3.066893 pixels which is larger than
2 X fitted extent = 1.848828 x 1.848828, not incorporating fit results
[Sat Nov 26 10:54:02 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 10:54:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 10:54:02 2011] Assessing source extent using major
[Sat Nov 26 10:54:02 2011] Source does appear to be extended
[Sat Nov 26 10:54:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 10:54:35 2011] XMMSAS src. selection expression = ellipse(23892.331940, 30476.103668, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Nov 26 10:54:35 2011] Writing source region out to fullrun_pn_xmm0550360101_pi300-10000_pass1_cl_src21_src.reg
[Sat Nov 26 10:54:35 2011] Extracting stamp from image fullrun_pn_xmm0550360101_pi300-10000_cl_sm2.00.img.gz, (238, 313) - (313, 388)
[Sat Nov 26 10:54:35 2011] XMMSAS bgd. selection expression = annulus(23892.331940, 30476.103668, 1087.500000, 2175.000000, X, Y) && !ellipse(26223.672800, 28032.355600, 1161.928033, 1161.928033, 0.000000, X, Y) && !ellipse(26733.512000, 29608.497760, 1104.480032, 1104.480032, 0.000000, X, Y) && !ellipse(25491.150000, 29254.061200, 1294.088037, 1294.088037, 0.000000, X, Y) && !ellipse(26118.764000, 30925.602400, 1346.272039, 927.680027, 62.349300, X, Y) && !ellipse(25122.886000, 30711.286000, 1005.552029, 1005.552029, 0.000000, X, Y) && !ellipse(25375.710497, 30366.049198, 1311.416038, 775.833573, 58.406711, X, Y) && !ellipse(26514.127600, 30289.188000, 1346.272039, 1346.272039, 0.000000, X, Y) && !ellipse(24506.548000, 28892.190000, 1286.784037, 1286.784037, 0.000000, X, Y)
[Sat Nov 26 10:54:35 2011] Writing fullrun_pn_xmm0550360101_pi300-10000_pass1_cl_src21.gif
[Sat Nov 26 11:53:46 2011] Mean detx,y = (-1135.24, -3484.30) 
[Sat Nov 26 11:53:50 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Nov 26 11:54:17 2011] Binned source spectrum to 10 counts/bin
[Sat Nov 26 11:54:18 2011] Setting source spectrum file to fullrun_pn_xmm0550360101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat Nov 26 11:54:18 2011] Setting bgd. spectrum file to fullrun_pn_xmm0550360101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sat Nov 26 20:19:10 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Nov 26 20:19:10 2011] rmf not generated due to insufficient counts
[Sun Nov 27 04:35:03 2011] Updating aperture counts using extracted products
[Sun Nov 27 04:35:03 2011] Error reading totcts from fullrun_pn_xmm0550360101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sun Nov 27 04:35:06 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 04:35:06 2011] Using photon index=1.80, rate=0.00997, arf fullrun_pn_xmm0550360101_pi300-10000_pass1_cl_src21.arf
[Sun Nov 27 04:35:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 04:35:06 2011] Updating source flux to 3.1e-14
[Sun Nov 27 04:44:34 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting