[Fri Nov 25 21:54:01 2011] Detection parameters:
  Position = (283.5, 313.8) = 15 23 11.17 8 36 5.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 248.9 +/- 43.7
  Background counts = 221.0
  Rate = 0.01 +/- 0.002

[Fri Nov 25 21:54:02 2011] Off-axis axis estimate = 1.56'
[Sat Nov 26 03:03:48 2011] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 03:03:48 2011] Initial guess for spatial extent in simple fitting = 7.21"
[Sat Nov 26 03:03:48 2011] source mask rpix=1.7, npix_max = 18, mask sum = 17, frac = 0.914
[Sat Nov 26 03:03:48 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 7.21"
[Sat Nov 26 04:58:55 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src10.ximg exists
[Sat Nov 26 04:58:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src10.csv
[Sat Nov 26 04:58:55 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Nov 26 04:58:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src10.csv
[Sat Nov 26 04:58:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 04:58:55 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Nov 26 04:58:55 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Nov 26 04:58:55 2011] Fit fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Nov 26 04:59:29 2011] Source 7 is offset by 6.942595 and 6.428061 pixels which is larger than
2 X fitted extent = 0.828414 x 0.828414, not incorporating fit results
[Sat Nov 26 04:59:29 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 04:59:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 04:59:29 2011] Assessing source extent using major
[Sat Nov 26 04:59:29 2011] Source does appear to be extended
[Sat Nov 26 04:59:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 09:14:39 2011] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 09:14:39 2011] Initial guess for spatial extent in simple fitting = 7.21"
[Sat Nov 26 09:14:39 2011] source mask rpix=1.7, npix_max = 18, mask sum = 17, frac = 0.914
[Sat Nov 26 09:14:39 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 7.21"
[Sat Nov 26 10:53:46 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src8.ximg exists
[Sat Nov 26 10:53:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src8.csv
[Sat Nov 26 10:53:46 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src8_1.ximg exists
[Sat Nov 26 10:53:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src8.csv
[Sat Nov 26 10:53:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 10:53:47 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sat Nov 26 10:53:47 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sat Nov 26 10:53:47 2011] Fit fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Sat Nov 26 10:54:17 2011] Source 7 is offset by 5.069331 and -6.793387 pixels which is larger than
2 X fitted extent = 2.109471 x 2.109471, not incorporating fit results
[Sat Nov 26 10:54:17 2011] Spatial fit model total counts = 8511.210000, observed total counts = 8499.000000
[Sat Nov 26 10:54:17 2011] Offset between fit and detection position for source 7 = 3.485903 pixels
[Sat Nov 26 10:54:17 2011] Warning, changing simple spatial fit ID from 8 to 11
[Sat Nov 26 10:54:17 2011] 8859.529000 total counts/ 8460.590000 bgd. counts: snr = 4.337167
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 3.485903 pixels
  Position = (284.3, 310.4) = 15 23 10.93 8 35 41.6
  Extent = 14.9 (12.1-28.2)", rotation angle = 0
  Source counts = 398.9 +/- 94.1
  Background counts = 8460.6
  Rate = 0.01 +/- 0.003
[Sat Nov 26 10:54:17 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 10:54:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 10:54:17 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 10:54:17 2011] Source does appear to be extended
[Sat Nov 26 10:54:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 00:01:35 2011] XMMSAS src. selection expression = ellipse(24684.634000, 26960.470000, 895.938026, 895.938026, 0.000000, X, Y)
[Sun Nov 27 00:01:35 2011] Writing source region out to fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src7_src.reg
[Sun Nov 27 00:01:35 2011] Extracting stamp from image fullrun_mos2_xmm0550360101_pi300-10000_cl_sm2.00.img.gz, (233, 259) - (336, 362)
[Sun Nov 27 00:01:35 2011] XMMSAS bgd. selection expression = annulus(24684.634000, 26960.470000, 1493.230043, 2986.460086, X, Y) && !ellipse(24213.591220, 23689.908000, 377.788887, 377.788887, 0.000000, X, Y) && !ellipse(26210.212000, 28024.168000, 1659.920048, 1659.920048, 0.000000, X, Y) && !ellipse(25674.362000, 26727.710000, 1114.080032, 1114.080032, 0.000000, X, Y) && !ellipse(27484.723600, 27741.010000, 1188.168034, 572.405616, 90.000000, X, Y) && !ellipse(27478.176000, 29057.154000, 2609.552075, 2609.552075, 0.000000, X, Y) && !ellipse(26296.314000, 28599.474000, 633.712818, 633.712818, 0.000000, X, Y) && !ellipse(25483.812000, 27522.060000, 1126.624032, 1126.624032, 0.000000, X, Y) && !ellipse(28197.777893, 28834.745972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28279.486000, 29932.308000, 1304.776038, 1304.776038, 0.000000, X, Y) && !ellipse(24345.149841, 28742.374847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25370.670000, 30765.336000, 1354.416039, 749.345622, 59.951000, X, Y) && !ellipse(25111.099243, 30038.746002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24691.206360, 29581.690674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27509.845800, 24944.395800, 837.528024, 837.528024, 0.000000, X, Y)
[Sun Nov 27 00:01:35 2011] Writing fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src7.gif
[Sun Nov 27 00:29:48 2011] Mean detx,y = (1842.68, -185.44) 
[Sun Nov 27 00:29:51 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Nov 27 00:30:05 2011] Binned source spectrum to 10 counts/bin
[Sun Nov 27 00:30:05 2011] Setting source spectrum file to fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Nov 27 00:30:05 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Nov 27 04:35:12 2011] Updating aperture counts using extracted products
[Sun Nov 27 04:35:12 2011] Error reading totcts from fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Nov 27 04:35:14 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 04:35:14 2011] Using photon index=1.80, rate=0.0145, arf fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src7.arf
[Sun Nov 27 04:35:14 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 04:35:14 2011] Updating source flux to 1.3e-13
[Sun Nov 27 04:39:54 2011] Flag b found in src. 7 procflags, skipping spectral fitting