[Fri Nov 25 21:54:01 2011] Detection parameters:
  Position = (309.7, 335.0) = 15 23 3.48 8 37 26.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 416.8 +/- 32.8
  Background counts = 216.1
  Rate = 0.02 +/- 0.001

[Fri Nov 25 21:54:02 2011] Off-axis axis estimate = 2.77'
[Sat Nov 26 03:03:48 2011] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 03:03:48 2011] Initial guess for spatial extent in simple fitting = 7.81"
[Sat Nov 26 03:03:48 2011] source mask rpix=1.8, npix_max = 21, mask sum = 17, frac = 0.806
[Sat Nov 26 03:03:48 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 7.81"
[Sat Nov 26 04:58:55 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src7.ximg exists
[Sat Nov 26 04:58:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src7.csv
[Sat Nov 26 04:58:55 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat Nov 26 04:58:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src7.csv
[Sat Nov 26 04:58:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 04:58:55 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat Nov 26 04:58:55 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Nov 26 04:58:55 2011] Fit fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sat Nov 26 04:59:29 2011] Source 5 is offset by 6.880687 and 5.644776 pixels which is larger than
2 X fitted extent = 3.609559 x 3.609559, not incorporating fit results
[Sat Nov 26 04:59:29 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 04:59:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 04:59:29 2011] Assessing source extent using major
[Sat Nov 26 04:59:29 2011] Source does appear to be extended
[Sat Nov 26 04:59:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 04:59:29 2011] Source is confused with source 3
[Sat Nov 26 09:14:39 2011] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 09:14:39 2011] Initial guess for spatial extent in simple fitting = 7.81"
[Sat Nov 26 09:14:39 2011] source mask rpix=1.8, npix_max = 21, mask sum = 17, frac = 0.806
[Sat Nov 26 09:14:39 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 7.81"
[Sat Nov 26 10:53:46 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src6.ximg exists
[Sat Nov 26 10:53:46 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Nov 26 10:53:46 2011] Fit fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src6 appears to have run properly
[Sat Nov 26 10:53:46 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Nov 26 10:53:46 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Nov 26 10:53:46 2011] Fit fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sat Nov 26 10:54:17 2011] Warning, spatial fit 6 centroid is now closest to src. 3
[Sat Nov 26 10:54:17 2011] Spatial fit model total counts = 4270.200000, observed total counts = 4268.000000
[Sat Nov 26 10:54:17 2011] Offset between fit and detection position for source 5 = 6.718098 pixels
[Sat Nov 26 10:54:17 2011] Warning, changing simple spatial fit ID from 6 to 14
[Sat Nov 26 10:54:17 2011] 4252.730000 total counts/ 3157.140000 bgd. counts: snr = 19.498497
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 6.718098 pixels
  Position = (316.4, 334.5) = 15 23 1.51 8 37 26.5
  Extent = 32.6 (32.5-65.2)", rotation angle = 0
  Source counts = 1095.6 +/- 65.2
  Background counts = 3157.1
  Rate = 0.04 +/- 0.002
[Sat Nov 26 10:54:17 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 10:54:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 10:54:17 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 10:54:17 2011] Source does appear to be extended
[Sat Nov 26 10:54:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 00:01:35 2011] Counts = 1095.590000, rescaling region sizes by 2.000000
[Sun Nov 27 00:01:35 2011] XMMSAS src. selection expression = ellipse(27478.176000, 29057.154000, 3914.328113, 3914.328113, 0.000000, X, Y)
[Sun Nov 27 00:01:35 2011] Writing source region out to fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src5_src.reg
[Sun Nov 27 00:01:35 2011] Extracting stamp from image fullrun_mos2_xmm0550360101_pi300-10000_cl_sm2.00.img.gz, (91, 110) - (541, 560)
[Sun Nov 27 00:01:35 2011] XMMSAS bgd. selection expression = annulus(27478.176000, 29057.154000, 13047.760375, 26095.520751, X, Y) && !ellipse(24213.591220, 23689.908000, 377.788887, 377.788887, 0.000000, X, Y) && !ellipse(26210.212000, 28024.168000, 1659.920048, 1659.920048, 0.000000, X, Y) && !ellipse(25674.362000, 26727.710000, 1114.080032, 1114.080032, 0.000000, X, Y) && !ellipse(27484.723600, 27741.010000, 1188.168034, 572.405616, 90.000000, X, Y) && !ellipse(30513.653748, 34822.495483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26296.314000, 28599.474000, 633.712818, 633.712818, 0.000000, X, Y) && !ellipse(24684.634000, 26960.470000, 1194.584034, 1194.584034, 0.000000, X, Y) && !ellipse(30105.077400, 29218.904000, 340.867210, 340.867210, 0.000000, X, Y) && !ellipse(25483.812000, 27522.060000, 1126.624032, 1126.624032, 0.000000, X, Y) && !ellipse(28197.777893, 28834.745972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31454.550995, 17703.983017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28279.486000, 29932.308000, 1304.776038, 1304.776038, 0.000000, X, Y) && !ellipse(38683.709052, 20623.928582, 554.203411, 361.034125, 119.103061, X, Y) && !ellipse(24345.149841, 28742.374847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19893.681340, 25450.366200, 407.625320, 407.625320, 0.000000, X, Y) && !ellipse(25370.670000, 30765.336000, 1354.416039, 749.345622, 59.951000, X, Y) && !ellipse(25111.099243, 30038.746002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24691.206360, 29581.690674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27509.845800, 24944.395800, 837.528024, 837.528024, 0.000000, X, Y)
[Sun Nov 27 00:01:35 2011] Writing fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src5.gif
[Sun Nov 27 00:13:20 2011] Mean detx,y = (-660.40, 375.60) 
[Sun Nov 27 00:13:24 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Nov 27 00:29:15 2011] Binned source spectrum to 10 counts/bin
[Sun Nov 27 00:29:16 2011] Setting source spectrum file to fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Nov 27 00:29:16 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Nov 27 04:35:12 2011] Updating aperture counts using extracted products
[Sun Nov 27 04:35:12 2011] Error reading totcts from fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Nov 27 04:35:13 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 04:35:13 2011] Using photon index=1.80, rate=0.0398, arf fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src5.arf
[Sun Nov 27 04:35:13 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 04:35:13 2011] Updating source flux to 3.3e-13
[Sun Nov 27 04:39:54 2011] Flag b found in src. 5 procflags, skipping spectral fitting
[Sun Nov 27 04:39:54 2011] Flag c found in src. 5 procflags, skipping spectral fitting