[Fri Nov 25 21:54:02 2011] Detection parameters:
  Position = (176.3, 446.8) = 15 23 42.63 8 45 35.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.4 +/- 13.0
  Background counts = 19.1
  Rate = 0.003 +/- 0.0005

[Fri Nov 25 21:54:02 2011] Off-axis axis estimate = 13.93'
[Sat Nov 26 03:03:48 2011] Using EEF radius (= 13.39 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 03:03:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Nov 26 03:03:48 2011] Initial guess for spatial extent in simple fitting = 13.39"
[Sat Nov 26 03:03:48 2011] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.956
[Sat Nov 26 03:03:48 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 13.39"
[Sat Nov 26 04:58:55 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src33.ximg exists
[Sat Nov 26 04:58:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src33.csv
[Sat Nov 26 04:58:55 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src33_1.ximg exists
[Sat Nov 26 04:58:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src33.csv
[Sat Nov 26 04:58:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 04:58:56 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sat Nov 26 04:58:56 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sat Nov 26 04:58:56 2011] Fit fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Sat Nov 26 04:59:29 2011] Spatial fit model total counts = 300.918000, observed total counts = 301.000000
[Sat Nov 26 04:59:29 2011] Offset between fit and detection position for source 21 = 0.093167 pixels
[Sat Nov 26 04:59:29 2011] 299.737100 total counts/ 260.243000 bgd. counts: snr = 2.448176
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.093167 pixels
  Position = (176.3, 446.7) = 15 23 42.61 8 45 34.2
  Extent = 4.8 (3.3-6.9)", rotation angle = 0
  Source counts = 39.5 +/- 17.3
  Background counts = 260.2
  Rate = 0.001 +/- 0.0006
[Sat Nov 26 04:59:29 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 04:59:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 04:59:29 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 04:59:29 2011] Source does appear to be extended
[Sat Nov 26 04:59:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 04:59:29 2011] Deleting source due to low Poisson probability 0.8