[Fri Nov 25 21:54:01 2011] Detection parameters:
  Position = (303.9, 322.0) = 15 23 5.18 8 36 31.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1528.8 +/- 53.9
  Background counts = 236.4
  Rate = 0.06 +/- 0.002

[Fri Nov 25 21:54:02 2011] Off-axis axis estimate = 1.76'
[Sat Nov 26 03:03:48 2011] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 03:03:48 2011] Initial guess for spatial extent in simple fitting = 7.31"
[Sat Nov 26 03:03:48 2011] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.789
[Sat Nov 26 03:03:48 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 7.31"
[Sat Nov 26 04:58:54 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src2.ximg exists
[Sat Nov 26 04:58:54 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Nov 26 04:58:54 2011] Fit fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src2 appears to have run properly
[Sat Nov 26 04:58:55 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Nov 26 04:58:55 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Nov 26 04:58:55 2011] Fit fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Nov 26 04:59:29 2011] Spatial fit model total counts = 7848.660000, observed total counts = 7842.000000
[Sat Nov 26 04:59:29 2011] Offset between fit and detection position for source 2 = 1.559026 pixels
[Sat Nov 26 04:59:29 2011] 7650.870000 total counts/ 5977.160000 bgd. counts: snr = 21.648747
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.559026 pixels
  Position = (302.9, 323.2) = 15 23 5.48 8 36 37.2
  Extent = 14.6 (14.6-29.2)", rotation angle = 0
  Source counts = 1673.7 +/- 87.5
  Background counts = 5977.2
  Rate = 0.06 +/- 0.003
[Sat Nov 26 04:59:29 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 04:59:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 04:59:29 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 04:59:29 2011] Source does appear to be extended
[Sat Nov 26 04:59:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 04:59:29 2011] Source is confused with source 3
[Sat Nov 26 09:14:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Nov 26 09:14:39 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Nov 26 09:14:39 2011] Initial guess for spatial extent in simple fitting = 14.61"
[Sat Nov 26 09:14:39 2011] source mask rpix=3.4, npix_max = 59, mask sum = 58, frac = 0.974
[Sat Nov 26 09:14:39 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 14.61"
[Sat Nov 26 10:53:46 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src2.ximg exists
[Sat Nov 26 10:53:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src2.csv
[Sat Nov 26 10:53:46 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Nov 26 10:53:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src2.csv
[Sat Nov 26 10:53:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 10:53:46 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Nov 26 10:53:46 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Nov 26 10:53:46 2011] Fit fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Nov 26 10:54:17 2011] Warning, spatial fit 2 centroid is now closest to src. 3
[Sat Nov 26 10:54:17 2011] Spatial fit model total counts = 10086.200000, observed total counts = 10071.000000
[Sat Nov 26 10:54:17 2011] Offset between fit and detection position for source 2 = 1.184025 pixels
[Sat Nov 26 10:54:17 2011] Warning, changing simple spatial fit ID from 2 to 7
[Sat Nov 26 10:54:17 2011] 9989.370000 total counts/ 7472.290000 bgd. counts: snr = 29.118578
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.184025 pixels
  Position = (301.8, 322.7) = 15 23 5.79 8 36 34.8
  Extent = 20.7 (19.0-24.4)", rotation angle = 0
  Source counts = 2517.1 +/- 99.9
  Background counts = 7472.3
  Rate = 0.09 +/- 0.004
[Sat Nov 26 10:54:17 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 10:54:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 10:54:17 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 10:54:17 2011] Source does appear to be extended
[Sat Nov 26 10:54:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 00:01:35 2011] Counts = 2517.080000, rescaling region sizes by 2.000000
[Sun Nov 27 00:01:35 2011] XMMSAS src. selection expression = ellipse(26210.212000, 28024.168000, 2489.880072, 2489.880072, 0.000000, X, Y)
[Sun Nov 27 00:01:35 2011] Writing source region out to fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src2_src.reg
[Sun Nov 27 00:01:35 2011] Extracting stamp from image fullrun_mos2_xmm0550360101_pi300-10000_cl_sm2.00.img.gz, (159, 180) - (445, 466)
[Sun Nov 27 00:01:35 2011] XMMSAS bgd. selection expression = annulus(26210.212000, 28024.168000, 8299.600239, 16599.200478, X, Y) && !ellipse(24213.591220, 23689.908000, 377.788887, 377.788887, 0.000000, X, Y) && !ellipse(25674.362000, 26727.710000, 1114.080032, 1114.080032, 0.000000, X, Y) && !ellipse(27484.723600, 27741.010000, 1188.168034, 572.405616, 90.000000, X, Y) && !ellipse(30513.653748, 34822.495483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27478.176000, 29057.154000, 2609.552075, 2609.552075, 0.000000, X, Y) && !ellipse(26296.314000, 28599.474000, 633.712818, 633.712818, 0.000000, X, Y) && !ellipse(24684.634000, 26960.470000, 1194.584034, 1194.584034, 0.000000, X, Y) && !ellipse(30105.077400, 29218.904000, 340.867210, 340.867210, 0.000000, X, Y) && !ellipse(25483.812000, 27522.060000, 1126.624032, 1126.624032, 0.000000, X, Y) && !ellipse(28197.777893, 28834.745972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31454.550995, 17703.983017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28279.486000, 29932.308000, 1304.776038, 1304.776038, 0.000000, X, Y) && !ellipse(38683.709052, 20623.928582, 554.203411, 361.034125, 119.103061, X, Y) && !ellipse(24345.149841, 28742.374847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19893.681340, 25450.366200, 407.625320, 407.625320, 0.000000, X, Y) && !ellipse(25370.670000, 30765.336000, 1354.416039, 749.345622, 59.951000, X, Y) && !ellipse(25111.099243, 30038.746002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24691.206360, 29581.690674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27509.845800, 24944.395800, 837.528024, 837.528024, 0.000000, X, Y)
[Sun Nov 27 00:01:35 2011] Writing fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src2.gif
[Sun Nov 27 00:03:13 2011] Mean detx,y = (93.64, 111.86) 
[Sun Nov 27 00:03:18 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Nov 27 00:11:17 2011] Binned source spectrum to 10 counts/bin
[Sun Nov 27 00:11:18 2011] Setting source spectrum file to fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Nov 27 00:11:18 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Nov 27 04:35:12 2011] Updating aperture counts using extracted products
[Sun Nov 27 04:35:12 2011] Error reading totcts from fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Nov 27 04:35:13 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 04:35:13 2011] Using photon index=1.80, rate=0.0914, arf fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src2.arf
[Sun Nov 27 04:35:13 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 04:35:13 2011] Updating source flux to 7.7e-13
[Sun Nov 27 04:39:54 2011] Flag c found in src. 2 procflags, skipping spectral fitting