[Fri Nov 25 21:54:02 2011] Detection parameters:
  Position = (230.0, 292.7) = 15 23 26.84 8 34 28.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.5 +/- 16.1
  Background counts = 56.6
  Rate = 0.005 +/- 0.0006

[Fri Nov 25 21:54:02 2011] Off-axis axis estimate = 4.98'
[Sat Nov 26 03:03:48 2011] Using EEF radius (= 8.92 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 03:03:48 2011] Initial guess for spatial extent in simple fitting = 8.92"
[Sat Nov 26 03:03:48 2011] source mask rpix=2.0, npix_max = 26, mask sum = 21, frac = 0.808
[Sat Nov 26 03:03:48 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 8.92"
[Sat Nov 26 04:58:55 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src19.ximg exists
[Sat Nov 26 04:58:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src19.csv
[Sat Nov 26 04:58:55 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat Nov 26 04:58:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src19.csv
[Sat Nov 26 04:58:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 04:58:55 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat Nov 26 04:58:55 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Nov 26 04:58:55 2011] Fit fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sat Nov 26 04:59:29 2011] Spatial fit model total counts = 513.999000, observed total counts = 514.000000
[Sat Nov 26 04:59:29 2011] Offset between fit and detection position for source 11 = 0.855916 pixels
[Sat Nov 26 04:59:29 2011] 511.489000 total counts/ 393.437000 bgd. counts: snr = 5.951628
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.855916 pixels
  Position = (229.3, 293.1) = 15 23 27.06 8 34 26.1
  Extent = 4.8 (4.0-5.9)", rotation angle = 0
  Source counts = 118.1 +/- 22.6
  Background counts = 393.4
  Rate = 0.004 +/- 0.0008
[Sat Nov 26 04:59:29 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 04:59:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 04:59:29 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 04:59:29 2011] Source does appear to be extended
[Sat Nov 26 04:59:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 09:14:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Nov 26 09:14:39 2011] Initial guess for spatial extent in simple fitting = 4.84"
[Sat Nov 26 09:14:39 2011] source mask rpix=1.1, npix_max = 10, mask sum = 11, frac = 1.058
[Sat Nov 26 09:14:39 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 4.84"
[Sat Nov 26 10:53:46 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src17.ximg exists
[Sat Nov 26 10:53:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src17.csv
[Sat Nov 26 10:53:46 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat Nov 26 10:53:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src17.csv
[Sat Nov 26 10:53:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 10:53:47 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat Nov 26 10:53:47 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat Nov 26 10:53:47 2011] Fit fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sat Nov 26 10:54:17 2011] Spatial fit model total counts = 498.911000, observed total counts = 499.000000
[Sat Nov 26 10:54:17 2011] Offset between fit and detection position for source 11 = 0.060355 pixels
[Sat Nov 26 10:54:17 2011] 496.177000 total counts/ 371.768000 bgd. counts: snr = 6.452318
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.060355 pixels
  Position = (229.2, 293.1) = 15 23 27.08 8 34 26.1
  Extent = 5.1 (4.2-6.1)", rotation angle = 0
  Source counts = 124.4 +/- 22.3
  Background counts = 371.8
  Rate = 0.005 +/- 0.0008
[Sat Nov 26 10:54:17 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 10:54:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 10:54:17 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 10:54:17 2011] Source does appear to be extended
[Sat Nov 26 10:54:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 00:01:35 2011] XMMSAS src. selection expression = ellipse(19893.681340, 25450.366200, 305.718990, 305.718990, 0.000000, X, Y)
[Sun Nov 27 00:01:35 2011] Writing source region out to fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src11_src.reg
[Sun Nov 27 00:01:35 2011] Extracting stamp from image fullrun_mos2_xmm0550360101_pi300-10000_cl_sm2.00.img.gz, (212, 276) - (247, 311)
[Sun Nov 27 00:01:35 2011] XMMSAS bgd. selection expression = annulus(19893.681340, 25450.366200, 509.531650, 1019.063301, X, Y)
[Sun Nov 27 00:01:35 2011] Writing fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src11.gif
[Sun Nov 27 00:33:08 2011] Mean detx,y = (6946.46, 250.60) 
[Sun Nov 27 00:33:10 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Nov 27 00:33:29 2011] Binned source spectrum to 10 counts/bin
[Sun Nov 27 00:33:29 2011] Setting source spectrum file to fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Nov 27 00:33:29 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Nov 27 04:35:13 2011] Updating aperture counts using extracted products
[Sun Nov 27 04:35:13 2011] Error reading totcts from fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Nov 27 04:35:14 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 04:35:14 2011] Using photon index=1.80, rate=0.00452, arf fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src11.arf
[Sun Nov 27 04:35:14 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 04:35:14 2011] Updating source flux to 8.4e-14