[Fri Nov 25 21:54:01 2011] Detection parameters:
  Position = (278.8, 272.9) = 15 23 12.53 8 32 58.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3209.5 +/- 70.1
  Background counts = 114.0
  Rate = 0.1 +/- 0.003

[Fri Nov 25 21:54:02 2011] Off-axis axis estimate = 2.33'
[Sat Nov 26 03:03:48 2011] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 03:03:48 2011] Initial guess for spatial extent in simple fitting = 7.60"
[Sat Nov 26 03:03:48 2011] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.793
[Sat Nov 26 03:03:48 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.60"
[Sat Nov 26 04:58:54 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Nov 26 04:58:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src1.csv
[Sat Nov 26 04:58:54 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Nov 26 04:58:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src1.csv
[Sat Nov 26 04:58:54 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 04:58:55 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Nov 26 04:58:55 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Nov 26 04:58:55 2011] Fit fullrun_mos2_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Nov 26 04:59:29 2011] Spatial fit model total counts = 3686.000000, observed total counts = 3686.000000
[Sat Nov 26 04:59:29 2011] Offset between fit and detection position for source 1 = 0.048042 pixels
[Sat Nov 26 04:59:29 2011] 3730.350000 total counts/ 1710.100000 bgd. counts: snr = 48.853351
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.048042 pixels
  Position = (278.9, 272.9) = 15 23 12.52 8 32 58.1
  Extent = 4.7 (4.5-4.9)", rotation angle = 0
  Source counts = 2020.2 +/- 61.1
  Background counts = 1710.1
  Rate = 0.07 +/- 0.002
[Sat Nov 26 04:59:29 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 04:59:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 04:59:29 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 04:59:29 2011] Source does appear to be extended
[Sat Nov 26 04:59:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 09:14:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Nov 26 09:14:39 2011] Initial guess for spatial extent in simple fitting = 4.70"
[Sat Nov 26 09:14:39 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.902
[Sat Nov 26 09:14:39 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.70"
[Sat Nov 26 10:53:46 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Nov 26 10:53:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src1.csv
[Sat Nov 26 10:53:46 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Nov 26 10:53:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src1.csv
[Sat Nov 26 10:53:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 10:53:46 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Nov 26 10:53:46 2011] fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Nov 26 10:53:46 2011] Fit fullrun_mos2_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Nov 26 10:54:17 2011] Spatial fit model total counts = 3727.000000, observed total counts = 3727.000000
[Sat Nov 26 10:54:17 2011] Offset between fit and detection position for source 1 = 0.005011 pixels
[Sat Nov 26 10:54:17 2011] 3755.080000 total counts/ 1723.880000 bgd. counts: snr = 48.921433
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.005011 pixels
  Position = (278.9, 272.9) = 15 23 12.52 8 32 58.1
  Extent = 4.7 (4.5-4.9)", rotation angle = 0
  Source counts = 2031.2 +/- 61.3
  Background counts = 1723.9
  Rate = 0.07 +/- 0.002
[Sat Nov 26 10:54:17 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 10:54:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 10:54:17 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 10:54:17 2011] Source does appear to be extended
[Sat Nov 26 10:54:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 00:01:35 2011] Counts = 2031.200000, rescaling region sizes by 2.000000
[Sun Nov 27 00:01:35 2011] XMMSAS src. selection expression = ellipse(24213.591220, 23689.908000, 566.683330, 566.683330, 0.000000, X, Y)
[Sun Nov 27 00:01:35 2011] Writing source region out to fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src1_src.reg
[Sun Nov 27 00:01:35 2011] Extracting stamp from image fullrun_mos2_xmm0550360101_pi300-10000_cl_sm2.00.img.gz, (246, 240) - (311, 305)
[Sun Nov 27 00:01:35 2011] XMMSAS bgd. selection expression = annulus(24213.591220, 23689.908000, 1888.944434, 3777.888867, X, Y) && !ellipse(26210.212000, 28024.168000, 1659.920048, 1659.920048, 0.000000, X, Y) && !ellipse(25674.362000, 26727.710000, 1114.080032, 1114.080032, 0.000000, X, Y) && !ellipse(27484.723600, 27741.010000, 1188.168034, 572.405616, 90.000000, X, Y) && !ellipse(27478.176000, 29057.154000, 2609.552075, 2609.552075, 0.000000, X, Y) && !ellipse(24684.634000, 26960.470000, 1194.584034, 1194.584034, 0.000000, X, Y) && !ellipse(25483.812000, 27522.060000, 1126.624032, 1126.624032, 0.000000, X, Y) && !ellipse(27509.845800, 24944.395800, 837.528024, 837.528024, 0.000000, X, Y)
[Sun Nov 27 00:01:35 2011] Writing fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src1.gif
[Sun Nov 27 00:01:43 2011] Mean detx,y = (3614.57, -3030.70) 
[Sun Nov 27 00:01:46 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Nov 27 00:02:55 2011] Binned source spectrum to 10 counts/bin
[Sun Nov 27 00:02:56 2011] Setting source spectrum file to fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Nov 27 00:02:56 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Nov 27 04:35:12 2011] Updating aperture counts using extracted products
[Sun Nov 27 04:35:12 2011] Error reading totcts from fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Nov 27 04:35:13 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 04:35:13 2011] Using photon index=1.80, rate=0.0737, arf fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src1.arf
[Sun Nov 27 04:35:13 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 04:35:13 2011] Updating source flux to 7.8e-13
[Sun Nov 27 04:44:34 2011] Reading fit data from xmm0550360101/analysis//spectral/fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src1_pl.csv
[Sun Nov 27 04:44:34 2011] Spectral fit parameter nH value = 4.83502e+20
[Sun Nov 27 04:44:34 2011] Spectral fit parameter PhoIndex value = 1.66687
[Sun Nov 27 04:44:34 2011] Failed to get F(0.3-8.0) from xmm0550360101/analysis//spectral/fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Nov 27 04:44:34 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 04:44:34 2011] Using Nh = 4.8e+20, photon index=1.67, rate=0.0737, arf fullrun_mos2_xmm0550360101_pi300-10000_pass1_cl_src1.arf
[Sun Nov 27 04:44:34 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 04:44:34 2011] Updating source flux to 8.8e-13