[Fri Nov 25 21:53:35 2011] Detection parameters:
  Position = (315.5, 289.2) = 15 23 1.77 8 34 6.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.9 +/- 22.3
  Background counts = 153.6
  Rate = 0.005 +/- 0.0009

[Fri Nov 25 21:53:35 2011] Off-axis axis estimate = 1.41'
[Sat Nov 26 01:15:51 2011] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 01:15:51 2011] Initial guess for spatial extent in simple fitting = 7.13"
[Sat Nov 26 01:15:51 2011] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.092
[Sat Nov 26 01:15:51 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 7.13"
[Sat Nov 26 03:03:47 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src23.ximg exists
[Sat Nov 26 03:03:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src23.csv
[Sat Nov 26 03:03:47 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src23_1.ximg exists
[Sat Nov 26 03:03:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src23.csv
[Sat Nov 26 03:03:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 03:03:48 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sat Nov 26 03:03:48 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sat Nov 26 03:03:48 2011] Fit fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sat Nov 26 04:59:20 2011] Warning, spatial fit 23 centroid is now closest to src. 23
[Sat Nov 26 04:59:20 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 04:59:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 04:59:20 2011] Assessing source extent using major
[Sat Nov 26 04:59:20 2011] Source does appear to be extended
[Sat Nov 26 04:59:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 08:04:19 2011] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 08:04:19 2011] Initial guess for spatial extent in simple fitting = 7.13"
[Sat Nov 26 08:04:19 2011] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.092
[Sat Nov 26 08:04:19 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 7.13"
[Sat Nov 26 09:14:38 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass1_src20.ximg exists
[Sat Nov 26 09:14:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550360101_pi300-10000_cl_pass1_src20.csv
[Sat Nov 26 09:14:38 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass1_src20_1.ximg exists
[Sat Nov 26 09:14:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550360101_pi300-10000_cl_pass1_src20.csv
[Sat Nov 26 09:14:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550360101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550360101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 09:14:39 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sat Nov 26 09:14:39 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sat Nov 26 09:14:39 2011] Fit fullrun_mos1_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sat Nov 26 10:54:09 2011] Spatial fit model total counts = 2127.000000, observed total counts = 2127.000000
[Sat Nov 26 10:54:09 2011] Offset between fit and detection position for source 31 = 6.444138 pixels
[Sat Nov 26 10:54:09 2011] 2148.010000 total counts/ 1973.000000 bgd. counts: snr = 3.940028
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 6.444138 pixels
  Position = (319.5, 284.2) = 15 23 0.60 8 33 47.3
  Extent = 13.6 (12.2-14.3)", rotation angle = 0
  Source counts = 175.0 +/- 46.3
  Background counts = 1973.0
  Rate = 0.006 +/- 0.002
[Sat Nov 26 10:54:09 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 10:54:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 10:54:09 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 10:54:09 2011] Source does appear to be extended
[Sat Nov 26 10:54:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 21:40:55 2011] XMMSAS src. selection expression = ellipse(27749.986000, 24672.766000, 815.226023, 815.226023, 0.000000, X, Y)
[Sat Nov 26 21:40:55 2011] Writing source region out to fullrun_mos1_xmm0550360101_pi300-10000_pass1_cl_src31_src.reg
[Sat Nov 26 21:40:55 2011] Extracting stamp from image fullrun_mos1_xmm0550360101_pi300-10000_cl_sm2.00.img.gz, (273, 237) - (366, 331)
[Sat Nov 26 21:40:55 2011] XMMSAS bgd. selection expression = annulus(27749.986000, 24672.766000, 1358.710039, 2717.420078, X, Y) && !ellipse(26299.629000, 27888.328540, 1163.392033, 1163.392033, 0.000000, X, Y) && !ellipse(25174.952698, 26588.097351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26337.037781, 25538.819153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28445.030000, 25309.972200, 891.776026, 891.776026, 0.000000, X, Y)
[Sat Nov 26 21:40:55 2011] Writing fullrun_mos1_xmm0550360101_pi300-10000_pass1_cl_src31.gif
[Sat Nov 26 21:57:09 2011] Mean detx,y = (-3196.34, -159.05) 
[Sat Nov 26 21:57:10 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Nov 26 21:57:25 2011] Binned source spectrum to 10 counts/bin
[Sat Nov 26 21:57:25 2011] Setting source spectrum file to fullrun_mos1_xmm0550360101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat Nov 26 21:57:25 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0550360101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sun Nov 27 04:35:09 2011] Updating aperture counts using extracted products
[Sun Nov 27 04:35:09 2011] Error reading totcts from fullrun_mos1_xmm0550360101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sun Nov 27 04:35:11 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 04:35:11 2011] Using photon index=1.80, rate=0.00636, arf fullrun_mos1_xmm0550360101_pi300-10000_pass1_cl_src31.arf
[Sun Nov 27 04:35:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 04:35:11 2011] Updating source flux to 6.3e-14