[Fri Nov 25 21:53:35 2011] Detection parameters:
  Position = (313.7, 311.1) = 15 23 2.30 8 35 45.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 704.8 +/- 41.4
  Background counts = 200.8
  Rate = 0.03 +/- 0.002

[Fri Nov 25 21:53:35 2011] Off-axis axis estimate = 1.44'
[Sat Nov 26 01:15:51 2011] Using EEF radius (= 7.15 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 01:15:51 2011] Initial guess for spatial extent in simple fitting = 7.15"
[Sat Nov 26 01:15:51 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.871
[Sat Nov 26 01:15:51 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.15"
[Sat Nov 26 03:03:47 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src3.ximg exists
[Sat Nov 26 03:03:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src3.csv
[Sat Nov 26 03:03:47 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Nov 26 03:03:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src3.csv
[Sat Nov 26 03:03:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 03:03:48 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Nov 26 03:03:48 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Nov 26 03:03:48 2011] Fit fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Nov 26 04:59:20 2011] Spatial fit model total counts = 6070.450000, observed total counts = 6067.000000
[Sat Nov 26 04:59:20 2011] Offset between fit and detection position for source 3 = 6.615764 pixels
[Sat Nov 26 04:59:20 2011] 6058.229000 total counts/ 5773.000000 bgd. counts: snr = 3.753988
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 6.615764 pixels
  Position = (317.2, 305.4) = 15 23 1.28 8 35 19.8
  Extent = 14.3 (14.3-28.6)", rotation angle = 0
  Source counts = 285.2 +/- 77.8
  Background counts = 5773.0
  Rate = 0.01 +/- 0.003
[Sat Nov 26 04:59:20 2011] Spatial fit model total counts = 1980.400000, observed total counts = 1975.000000
[Sat Nov 26 04:59:20 2011] Offset between fit and detection position for source 3 = 5.738360 pixels
[Sat Nov 26 04:59:20 2011] Warning, changing simple spatial fit ID from 3 to 29
[Sat Nov 26 04:59:20 2011] 1968.778700 total counts/ 1935.700000 bgd. counts: snr = 0.751847
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 5.738360 pixels
  Position = (316.2, 299.8) = 15 23 1.56 8 34 55.2
  Extent = 14.7 (14.7-29.4)", rotation angle = 0
  Source counts = 33.1 +/- 44.4
  Background counts = 1935.7
  Rate = 0.001 +/- 0.002
  Deleting source due to low Poisson probability